Tizen Native API  5.5

The Player API provides functions for media playback and controlling media playback attributes.

Required Header

#include <player.h>

Overview

The Player API provides a way to play multimedia content. Content can be played from a file, from the network, or from memory. It gives the ability to start/stop/pause/mute, set the playback position (that is, seek), perform various status queries, and control the display.

Additional functions allow registering notifications via callback functions for various state change events.

This API also enables collaboration with the GUI service to present a video.

State Diagram

Playback of multimedia content is controlled by a state machine. The following diagram shows the life cycle and states of the Player.

capi_media_player_state_diagram.png

State Transitions

FUNCTION PRE-STATE POST-STATE SYNC TYPE
player_create() NONE IDLE SYNC
player_destroy() IDLE NONE SYNC
player_prepare() IDLE READY SYNC
player_prepare_async() IDLE READY ASYNC
player_unprepare() READY, PLAYING or PAUSED IDLE SYNC
player_start() READY or PAUSED PLAYING SYNC
player_stop() PLAYING READY SYNC
player_pause() PLAYING PAUSED SYNC

State Dependent Function Calls

The following table shows state-dependent function calls. It is forbidden to call the functions listed below in wrong states. Violation of this rule may result in unpredictable behavior.

FUNCTION VALID STATES DESCRIPTION
player_create() ANY -
player_destroy() IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_prepare() IDLE This function must be called after player_create()
player_unprepare() READY/ PLAYING/ PAUSED This function must be called after player_prepare()
player_start() READY/ PAUSED This function must be called after player_prepare()
player_stop() PLAYING/ PAUSED This function must be called after player_start() or player_pause()
player_pause() PLAYING This function must be called after player_start()
player_set_completed_cb()
player_set_interrupted_cb()
player_set_error_cb()
player_set_buffering_cb()
player_set_subtitle_updated_cb()
IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_set_video_stream_changed_cb()
player_set_media_stream_seek_cb()
player_set_media_stream_buffer_status_cb()
player_set_media_packet_video_frame_decoded_cb()
IDLE This function must be called before player_prepare()
player_unset_completed_cb()
player_unset_interrupted_cb()
player_unset_error_cb()
player_unset_buffering_cb()
player_unset_subtitle_updated_cb()
player_unset_video_stream_changed_cb()
player_unset_media_stream_seek_cb()
player_unset_media_stream_buffer_status_cb()
IDLE/ READY/ PLAYING/ PAUSED This function must be called after register callback functions such as player_set_completed_cb()
player_unset_media_packet_video_frame_decoded_cb() IDLE/ READY This function must be called after player_set_media_packet_video_frame_decoded_cb()
player_get_state() ANY -
player_set_uri() IDLE This function must be called before player_prepare()
player_set_memory_buffer() IDLE This function must be called before player_prepare()
player_set_subtitle_path() IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_set_volume() IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_get_volume() IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_set_sound_stream_info() IDLE This function must be called before player_prepare()
player_set_mute() IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_is_muted() IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_set_looping() IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_is_looping() IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_get_duration() PLAYING/ PAUSED This function must be called after player_start()
player_set_display() IDLE This function must be called before player_prepare()
player_set_display_mode()
player_set_display_visible()
IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_get_display_rotation()
player_is_display_visible()
IDLE/ READY/ PLAYING/ PAUSED This function must be called after player_create()
player_get_video_size() READY/ PLAYING/ PAUSED This function must be called after player_prepare()
player_set_subtitle_position_offset() PLAYING/ PAUSED This function must be called after player_start()
player_get_current_track()
player_get_track_language_code()
player_get_track_count()
player_select_track()
READY/ PLAYING/ PAUSED This function must be called after player_prepare()
player_set_audio_only() READY/ PLAYING/ PAUSED This function must be called after player_prepare()
player_set_streaming_buffering_time() IDLE This function must be called before player_prepare()
player_audio_offload_set_enabled() IDLE This function must be called before player_prepare()
player_audio_offload_is_activated() READY/ PLAYING/ PAUSED This function must be called after player_prepare()

Asynchronous Operations

All functions that change the player state are synchronous except player_prepare_async(), player_set_play_position(), and player_capture_video(). Thus the result is passed to the application via the callback mechanism.

Callback(Event) Operations

REGISTER UNREGISTER CALLBACK DESCRIPTION
player_set_completed_cb() player_unset_completed_cb() player_completed_cb() called when playback is completed
player_set_interrupted_cb() player_unset_interrupted_cb() player_interrupted_cb() called when playback is interrupted by player_interrupted_code_e
player_set_error_cb() player_unset_error_cb() player_error_cb() called when an error has occurred
player_set_buffering_cb() player_unset_buffering_cb() player_buffering_cb() called during content buffering
player_set_subtitle_updated_cb() player_unset_subtitle_updated_cb() player_subtitle_updated_cb() called when a subtitle updates
player_set_media_packet_video_frame_decoded_cb() player_unset_media_packet_video_frame_decoded_cb() player_media_packet_video_decoded_cb() called when a video frame is decoded
player_set_media_stream_seek_cb() player_unset_media_stream_seek_cb() player_media_stream_seek_cb() called when seeking is occurred during playback with external media buffer
player_set_media_stream_buffer_status_cb() player_unset_media_stream_buffer_status_cb() player_media_stream_buffer_status_cb() called when the buffer underrun or overflow is detected during playback with external media buffer
player_set_video_stream_changed_cb() player_unset_video_stream_changed_cb() player_video_stream_changed_cb() called when the video stream info is changed

Related Features

This API is related with the following features:

  • http://tizen.org/feature/opengles.version.2_0
  • http://tizen.org/feature/multimedia.player.spherical_video These features are required for 360 video playback.
  • http://tizen.org/feature/multimedia.player.audio_offload This feature is required for hardware-offloaded audio processing.

It is recommended to design feature related codes in your application for reliability. You can check if a device supports the related features for this API by using System Information, thereby controlling the procedure of your application. To ensure your application is only running on the device with specific features, please define the features in your manifest file using the manifest editor in the SDK. More details on featuring your application can be found from Feature Element.

Functions

int player_create (player_h *player)
 Creates a player handle for playing multimedia content.
int player_destroy (player_h player)
 Destroys the media player handle and releases all its resources.
int player_prepare (player_h player)
 Prepares the media player for playback.
int player_prepare_async (player_h player, player_prepared_cb callback, void *user_data)
 Prepares the media player for playback, asynchronously.
int player_unprepare (player_h player)
 Resets the media player.
int player_set_uri (player_h player, const char *uri)
 Sets the data source (file-path, HTTP or RTSP URI) to use.
int player_set_memory_buffer (player_h player, const void *data, int size)
 Sets memory as the data source.
int player_get_state (player_h player, player_state_e *state)
 Gets the player's current state.
int player_set_volume (player_h player, float left, float right)
 Sets the player's volume.
int player_get_volume (player_h player, float *left, float *right)
 Gets the player's current volume factor.
int player_set_sound_stream_info (player_h player, sound_stream_info_h stream_info)
 Sets the player's sound manager stream information.
int player_set_audio_latency_mode (player_h player, audio_latency_mode_e latency_mode)
 Sets the audio latency mode.
int player_get_audio_latency_mode (player_h player, audio_latency_mode_e *latency_mode)
 Gets the current audio latency mode.
int player_start (player_h player)
 Starts or resumes playback.
int player_stop (player_h player)
 Stops playing media content.
int player_pause (player_h player)
 Pauses the player.
int player_set_play_position (player_h player, int milliseconds, bool accurate, player_seek_completed_cb callback, void *user_data)
 Sets the seek position for playback, asynchronously.
int player_set_play_position_nsec (player_h player, int64_t nanoseconds, bool accurate, player_seek_completed_cb callback, void *user_data)
 Sets the seek position in nanoseconds for playback, asynchronously.
int player_get_play_position (player_h player, int *milliseconds)
 Gets the current position in milliseconds.
int player_get_play_position_nsec (player_h player, int64_t *nanoseconds)
 Gets the current position in nanoseconds.
int player_set_mute (player_h player, bool muted)
 Sets the player's mute status.
int player_is_muted (player_h player, bool *muted)
 Gets the player's mute status.
int player_set_looping (player_h player, bool looping)
 Sets the player's looping status.
int player_is_looping (player_h player, bool *looping)
 Gets the player's looping status.
int player_set_display (player_h player, player_display_type_e type, player_display_h display)
 Sets the video display.
int player_set_media_packet_video_frame_decoded_cb (player_h player, player_media_packet_video_decoded_cb callback, void *user_data)
 Sets a callback function for getting the decoded video frame.
int player_unset_media_packet_video_frame_decoded_cb (player_h player)
 Unsets the callback notifying the decoded video frame.
int player_set_media_packet_audio_frame_decoded_cb (player_h player, media_format_h format, player_audio_extract_option_e opt, player_media_packet_audio_decoded_cb callback, void *user_data)
 Sets a callback function for getting the decoded audio data.
int player_unset_media_packet_audio_frame_decoded_cb (player_h player)
 Unsets the callback notifying the decoded audio data.
int player_push_media_stream (player_h player, media_packet_h packet)
 Pushes elementary stream to decode audio or video.
int player_foreach_media_stream_supported_format (player_h player, player_supported_media_format_cb callback, void *user_data)
 Retrieves all supported media formats for the playback of external media stream.
int player_set_media_stream_info (player_h player, player_stream_type_e type, media_format_h format)
 Sets contents information for media stream.
int player_set_media_stream_buffer_status_cb (player_h player, player_stream_type_e type, player_media_stream_buffer_status_cb callback, void *user_data)
 Sets a callback function to be invoked when buffer underrun or overflow is occurred.
int player_unset_media_stream_buffer_status_cb (player_h player, player_stream_type_e type)
 Unsets the buffer status callback function.
int player_set_media_stream_seek_cb (player_h player, player_stream_type_e type, player_media_stream_seek_cb callback, void *user_data)
 Sets a callback function to be invoked when seeking is occurred.
int player_unset_media_stream_seek_cb (player_h player, player_stream_type_e type)
 Unsets the seek callback function.
int player_set_media_stream_buffer_max_size (player_h player, player_stream_type_e type, unsigned long long max_size)
 Sets the max size bytes of buffer.
int player_get_media_stream_buffer_max_size (player_h player, player_stream_type_e type, unsigned long long *max_size)
 Gets the max size bytes of buffer.
int player_set_media_stream_buffer_min_threshold (player_h player, player_stream_type_e type, unsigned int percent)
 Sets the buffer threshold percent of buffer.
int player_get_media_stream_buffer_min_threshold (player_h player, player_stream_type_e type, unsigned int *percent)
 Gets the buffer threshold percent of buffer.
int player_capture_video (player_h player, player_video_captured_cb callback, void *user_data)
 Captures the video frame, asynchronously.
int player_set_completed_cb (player_h player, player_completed_cb callback, void *user_data)
 Sets a callback function to be invoked when the playback is finished.
int player_unset_completed_cb (player_h player)
 Unsets the playback completed callback function.
int player_set_interrupted_cb (player_h player, player_interrupted_cb callback, void *user_data)
 Sets a callback function to be invoked when the playback is interrupted or the interrupt is completed.
int player_unset_interrupted_cb (player_h player)
 Unsets the interrupted callback function.
int player_set_error_cb (player_h player, player_error_cb callback, void *user_data)
 Sets a callback function to be invoked when an error occurs.
int player_unset_error_cb (player_h player)
 Unsets the error callback function.
int player_set_playback_rate (player_h player, float rate)
 Sets the playback rate.
int player_get_current_track (player_h player, player_stream_type_e type, int *index)
 Gets current track index.
int player_get_track_language_code (player_h player, player_stream_type_e type, int index, char **code)
 Gets language code of a track.
int player_get_track_count (player_h player, player_stream_type_e type, int *count)
 Gets the track count.
int player_select_track (player_h player, player_stream_type_e type, int index)
 Selects a track to play.
int player_set_audio_only (player_h player, bool audio_only)
 Sets the audio only mode.
int player_is_audio_only (player_h player, bool *audio_only)
 Gets the audio only mode status.
int player_set_replaygain_enabled (player_h player, bool enabled)
 Sets the player's replaygain status.
int player_is_replaygain_enabled (player_h player, bool *enabled)
 Gets the player's replaygain status.
int player_set_video_roi_area (player_h player, double x_scale, double y_scale, double w_scale, double h_scale)
 Sets the ROI (Region Of Interest) area of the content video source.
int player_get_video_roi_area (player_h player, double *x_scale, double *y_scale, double *w_scale, double *h_scale)
 Gets the ROI (Region Of Interest) area of the content video source.
int player_audio_pitch_set_enabled (player_h player, bool enabled)
 Enables or disables controlling the pitch of audio.
int player_audio_pitch_is_enabled (player_h player, bool *enabled)
 Gets the status of controlling the pitch of audio.
int player_audio_pitch_set_value (player_h player, float value)
 Sets the pitch of audio.
int player_audio_pitch_get_value (player_h player, float *value)
 Gets the pitch of audio.
int player_audio_offload_foreach_supported_format (player_h player, player_supported_media_format_cb callback, void *user_data)
 Retrieves all supported media formats for audio offload.
int player_audio_offload_set_enabled (player_h player, bool enabled)
 Enables or disables the audio offload.
int player_audio_offload_is_enabled (player_h player, bool *enabled)
 Gets the enabling status of audio offload.
int player_audio_offload_is_activated (player_h player, bool *activated)
 Gets the activation status of audio offload.
int player_set_audio_codec_type (player_h player, player_codec_type_e codec_type)
 Sets the default codec type of the audio decoder.
int player_get_audio_codec_type (player_h player, player_codec_type_e *codec_type)
 Gets the default codec type of the audio decoder.

Typedefs

typedef struct player_s * player_h
 The media player's type handle.
typedef void(* player_prepared_cb )(void *user_data)
 Called when the media player is prepared.
typedef void(* player_completed_cb )(void *user_data)
 Called when the media player is completed.
typedef void(* player_seek_completed_cb )(void *user_data)
 Called when the seek operation is completed.
typedef void(* player_interrupted_cb )(player_interrupted_code_e code, void *user_data)
 Called when the media player is interrupted.
typedef void(* player_error_cb )(int error_code, void *user_data)
 Called when an error occurs in the media player.
typedef void(* player_video_captured_cb )(unsigned char *captured_data, int width, int height, unsigned int size, void *user_data)
 Called when the video is captured.
typedef void(* player_media_packet_video_decoded_cb )(media_packet_h packet, void *user_data)
 Called to register for notifications about delivering media packet when each video frame is decoded.
typedef void(* player_media_packet_audio_decoded_cb )(media_packet_h packet, void *user_data)
 Called to register for notifications about delivering media packet when audio data is decoded.
typedef void(* player_media_stream_buffer_status_cb )(player_media_stream_buffer_status_e status, void *user_data)
 Called when the buffer level drops below the threshold of max size or no free space in buffer.
typedef void(* player_media_stream_seek_cb )(unsigned long long offset, void *user_data)
 Called to notify the next push-buffer offset when seeking is occurred.
typedef bool(* player_supported_media_format_cb )(media_format_mimetype_e format, void *user_data)
 Called to inform about the supported media format MIME type.

Typedef Documentation

typedef void(* player_completed_cb)(void *user_data)

Called when the media player is completed.

It will be invoked when player has reached the end of the stream.

Since :
2.3
Parameters:
[in]user_dataThe user data passed from the callback registration function
Precondition:
It will be invoked when the playback is completed if you register this callback using player_set_completed_cb().
See also:
player_set_completed_cb()
player_unset_completed_cb()
typedef void(* player_error_cb)(int error_code, void *user_data)
typedef struct player_s* player_h

The media player's type handle.

Since :
2.3
typedef void(* player_interrupted_cb)(player_interrupted_code_e code, void *user_data)

Called when the media player is interrupted.

If the code is PLAYER_INTERRUPTED_BY_RESOURCE_CONFLICT, the player state will be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, or PLAYER_STATE_PAUSED. Application should get exact state by calling player_get_state().

Since :
2.3
Parameters:
[in]codeThe interrupted error code
[in]user_dataThe user data passed from the callback registration function
See also:
player_set_interrupted_cb()
player_unset_interrupted_cb()
player_get_state()
typedef void(* player_media_packet_audio_decoded_cb)(media_packet_h packet, void *user_data)

Called to register for notifications about delivering media packet when audio data is decoded.

Since :
5.5
Remarks:
The packet should be released by calling media_packet_destroy().
It is recommended to release it as soon as it is rendered, to avoid memory exhaustion.
Parameters:
[in]packetReference pointer to the media packet
[in]user_dataThe user data passed from the callback registration function
typedef void(* player_media_packet_video_decoded_cb)(media_packet_h packet, void *user_data)

Called to register for notifications about delivering media packet when each video frame is decoded.

Since :
2.3
Remarks:
The UI update code must not be directly invoked.
The packet should be released using media_packet_destroy().
If not, the decoder will fail due to having insufficient buffer space for the decoded frame.
Parameters:
[in]packetReference pointer to the media packet
[in]user_dataThe user data passed from the callback registration function

Called when the buffer level drops below the threshold of max size or no free space in buffer.

Since :
2.4
Remarks:
This function is used for media stream playback only.
Parameters:
[in]statusThe buffer status
[in]user_dataThe user data passed from the callback registration function
See also:
player_set_media_stream_buffer_status_cb()
player_set_media_stream_buffer_max_size()
player_set_media_stream_buffer_min_threshold()
typedef void(* player_media_stream_seek_cb)(unsigned long long offset, void *user_data)

Called to notify the next push-buffer offset when seeking is occurred.

The next push-buffer should produce buffers from the new offset.

Since :
2.4
Remarks:
This function is used for media stream playback only.
Parameters:
[in]offsetThe new byte position to seek
[in]user_dataThe user data passed from the callback registration function
typedef void(* player_prepared_cb)(void *user_data)

Called when the media player is prepared.

It will be invoked when player has reached the begin of stream.

Since :
2.3
Parameters:
[in]user_dataThe user data passed from the callback registration function
Precondition:
player_prepare_async() will cause this callback.
Postcondition:
The player state will be PLAYER_STATE_READY.
See also:
player_prepare_async()
typedef void(* player_seek_completed_cb)(void *user_data)

Called when the seek operation is completed.

Since :
2.3
Parameters:
[in]user_dataThe user data passed from the callback registration function
See also:
player_set_play_position()
player_set_play_position_nsec()
typedef bool(* player_supported_media_format_cb)(media_format_mimetype_e format, void *user_data)

Called to inform about the supported media format MIME type.

The supported media format can vary depending on the device capabilities.

Since :
5.5
Parameters:
[in]formatThe supportable media format MIME type
[in]user_dataThe user data passed from the callback registration function
Returns:
true to continue with the next iteration of the loop, otherwise false to break out of the loop
See also:
media_format_mimetype_e
player_audio_offload_foreach_supported_format()
typedef void(* player_video_captured_cb)(unsigned char *captured_data, int width, int height, unsigned int size, void *user_data)

Called when the video is captured.

Since :
2.3
Remarks:
The color space format of the captured image is #IMAGE_UTIL_COLORSPACE_RGB888.
The captured_data should not be released and it can be used only in the callback. To use outside, make a copy.
Parameters:
[in]captured_dataThe captured image buffer
[in]widthThe width of the captured image
[in]heightThe height of the captured image
[in]sizeThe size of the captured image
[in]user_dataThe user data passed from the callback registration function
See also:
player_capture_video()

Enumeration Type Documentation

Enumeration for audio latency mode.

Since :
2.3
Enumerator:
AUDIO_LATENCY_MODE_LOW 

Low audio latency mode

AUDIO_LATENCY_MODE_MID 

Middle audio latency mode

AUDIO_LATENCY_MODE_HIGH 

High audio latency mode

Enumeration of audio extract option.

Since :
5.5
See also:
player_set_media_packet_audio_frame_decoded_cb()
Enumerator:
PLAYER_AUDIO_EXTRACT_DEFAULT 

Synchronized multichannel audio stream with the playback clock

PLAYER_AUDIO_EXTRACT_NO_SYNC_WITH_CLOCK 

No synchronized multichannel audio stream with the playback clock

PLAYER_AUDIO_EXTRACT_DEINTERLEAVE 

Synchronized mono audio stream with the playback clock

PLAYER_AUDIO_EXTRACT_NO_SYNC_AND_DEINTERLEAVE 

No synchronized mono audio stream with playback clock

Enumeration for codec type.

Since :
5.5
Enumerator:
PLAYER_CODEC_TYPE_HW 

This is an optional flag for using the H/W codec

PLAYER_CODEC_TYPE_SW 

This is an optional flag for using the S/W codec

Enumeration for display type.

Since :
2.3
Enumerator:
PLAYER_DISPLAY_TYPE_OVERLAY 

Overlay surface display

PLAYER_DISPLAY_TYPE_EVAS 

Evas image object surface display (Since 4.0)

PLAYER_DISPLAY_TYPE_NONE 

This disposes of buffers (Since 4.0)

Enumeration for media player's error codes.

Since :
2.3
Enumerator:
PLAYER_ERROR_NONE 

Successful

PLAYER_ERROR_OUT_OF_MEMORY 

Out of memory

PLAYER_ERROR_INVALID_PARAMETER 

Invalid parameter

PLAYER_ERROR_NO_SUCH_FILE 

No such file or directory

PLAYER_ERROR_INVALID_OPERATION 

Invalid operation

PLAYER_ERROR_FILE_NO_SPACE_ON_DEVICE 

No space left on the device

PLAYER_ERROR_FEATURE_NOT_SUPPORTED_ON_DEVICE 

Not supported Feature

PLAYER_ERROR_SEEK_FAILED 

Seek operation failure

PLAYER_ERROR_INVALID_STATE 

Invalid state

PLAYER_ERROR_NOT_SUPPORTED_FILE 

File format not supported

PLAYER_ERROR_INVALID_URI 

Invalid URI

PLAYER_ERROR_SOUND_POLICY 

Sound policy error

PLAYER_ERROR_CONNECTION_FAILED 

Streaming connection failed

PLAYER_ERROR_VIDEO_CAPTURE_FAILED 

Video capture failed

PLAYER_ERROR_DRM_EXPIRED 

Expired license

PLAYER_ERROR_DRM_NO_LICENSE 

No license

PLAYER_ERROR_DRM_FUTURE_USE 

License for future use

PLAYER_ERROR_DRM_NOT_PERMITTED 

Format not permitted

PLAYER_ERROR_RESOURCE_LIMIT 

Resource limit

PLAYER_ERROR_PERMISSION_DENIED 

Permission denied

PLAYER_ERROR_SERVICE_DISCONNECTED 

Socket connection lost (Since 3.0)

PLAYER_ERROR_BUFFER_SPACE 

No buffer space available (Since 3.0)

PLAYER_ERROR_NOT_SUPPORTED_AUDIO_CODEC 

Not supported audio codec but video can be played (Since 4.0)

PLAYER_ERROR_NOT_SUPPORTED_VIDEO_CODEC 

Not supported video codec but audio can be played (Since 4.0)

PLAYER_ERROR_NOT_SUPPORTED_SUBTITLE 

Not supported subtitle format (Since 4.0)

PLAYER_ERROR_NOT_SUPPORTED_FORMAT 

Not supported format (Since 5.5)

PLAYER_ERROR_NOT_AVAILABLE 

Not available operation (Since 5.5)

Enumeration for media player's interruption type.

Since :
2.3
Enumerator:
PLAYER_INTERRUPTED_BY_RESOURCE_CONFLICT 

Interrupted by a resource conflict and the player handle will be paused or unprepared

Enumeration of media stream buffer status.

Since :
2.4
See also:
player_set_media_stream_buffer_max_size()
player_set_media_stream_buffer_min_threshold()
Enumerator:
PLAYER_MEDIA_STREAM_BUFFER_UNDERRUN 

The buffer level is lower than the threshold

PLAYER_MEDIA_STREAM_BUFFER_OVERFLOW 

The buffer level is over than the threshold

Enumeration for media player state.

Since :
2.3
Enumerator:
PLAYER_STATE_NONE 

Player is not created

PLAYER_STATE_IDLE 

Player is created, but not prepared

PLAYER_STATE_READY 

Player is ready to play media

PLAYER_STATE_PLAYING 

Player is playing media

PLAYER_STATE_PAUSED 

Player is paused while playing media

Enumeration for stream type.

Since :
2.4
Enumerator:
PLAYER_STREAM_TYPE_DEFAULT 

Container type

PLAYER_STREAM_TYPE_AUDIO 

Audio element stream type

PLAYER_STREAM_TYPE_VIDEO 

Video element stream type

PLAYER_STREAM_TYPE_TEXT 

Text type


Function Documentation

Retrieves all supported media formats for audio offload.

The supported media format can vary depending on the device capabilities.

Since :
5.5
Remarks:
This function is related to the following feature:
http://tizen.org/feature/multimedia.player.audio_offload
Parameters:
[in]playerThe handle to the media player
[in]callbackThe iteration callback function
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_FEATURE_NOT_SUPPORTED_ON_DEVICEUnsupported feature
See also:
player_supported_media_format_cb()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
player_audio_offload_is_activated()
int player_audio_offload_is_activated ( player_h  player,
bool *  activated 
)

Gets the activation status of audio offload.

Audio offload could be inactivated depending on the audio device capability even if the audio offload feature is supported.

Since :
5.5
Remarks:
This function is related to the following feature:
http://tizen.org/feature/multimedia.player.audio_offload
Parameters:
[in]playerThe handle to the media player
[out]activatedThe activation status
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_STATEInvalid state
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_FEATURE_NOT_SUPPORTED_ON_DEVICEUnsupported feature
Precondition:
The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED
See also:
player_audio_offload_foreach_supported_format()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
int player_audio_offload_is_enabled ( player_h  player,
bool *  enabled 
)

Gets the enabling status of audio offload.

Since :
5.5
Remarks:
This function is related to the following feature:
http://tizen.org/feature/multimedia.player.audio_offload
Parameters:
[in]playerThe handle to the media player
[out]enabledThe enabling status (default: false)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_FEATURE_NOT_SUPPORTED_ON_DEVICEUnsupported feature
See also:
player_audio_offload_foreach_supported_format()
player_audio_offload_set_enabled()
player_audio_offload_is_activated()
int player_audio_offload_set_enabled ( player_h  player,
bool  enabled 
)

Enables or disables the audio offload.

The player lets the hardware decode and render the sound if the audio offload is enabled. This will reduce the power consumption, but will disable the ability to handle output PCM. Please check the remarks for a list of functions which will not work if offloading is enabled.

Since :
5.5
Remarks:
This function is related to the following feature:
http://tizen.org/feature/multimedia.player.audio_offload
The sound stream type of the player should be SOUND_STREAM_TYPE_MEDIA.
If audio offload is enabled, functions for audio effect are not available.
If audio offload is enabled, the following functions will return PLAYER_ERROR_NOT_AVAILABLE and they will not work at all even if they were called before enabling offload. :
player_set_media_packet_audio_frame_decoded_cb()
player_unset_media_packet_audio_frame_decoded_cb()
player_set_audio_latency_mode()
player_get_audio_latency_mode()
player_set_playback_rate()
player_get_current_track()
player_get_track_language_code()
player_get_track_count()
player_select_track()
player_set_replaygain_enabled()
player_is_replaygain_enabled()
player_audio_pitch_set_enabled()
player_audio_pitch_is_enabled()
player_audio_pitch_set_value()
player_audio_pitch_get_value()
Parameters:
[in]playerThe handle to the media player
[in]enabledThe new audio offload status (default: false)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_FEATURE_NOT_SUPPORTED_ON_DEVICEUnsupported feature
Precondition:
The player state must be PLAYER_STATE_IDLE.
See also:
player_set_sound_stream_info()
player_audio_effect_equalizer_is_available()
player_set_interrupted_cb()
player_audio_offload_foreach_supported_format()
player_audio_offload_is_enabled()
player_audio_offload_is_activated()
int player_audio_pitch_get_value ( player_h  player,
float *  value 
)

Gets the pitch of audio.

Since :
5.5
Remarks:
This function is used for audio content only.
Depending on audio codec type or by enabling audio offload, this function could be unavailable and this will return PLAYER_ERROR_NOT_AVAILABLE.
Parameters:
[in]playerThe handle to the media player
[out]valueThe audio stream pitch value
Valid range is 0.5~2. Default value is 1.
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_AVAILABLENot available
See also:
player_audio_pitch_set_enabled()
player_audio_pitch_is_enabled()
player_audio_pitch_set_value()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
player_set_audio_codec_type()
player_get_audio_codec_type()
int player_audio_pitch_is_enabled ( player_h  player,
bool *  enabled 
)

Gets the status of controlling the pitch of audio.

Since :
5.5
Remarks:
This function is used for audio content only.
Depending on audio codec type or by enabling audio offload, this function could be unavailable and this will return PLAYER_ERROR_NOT_AVAILABLE.
Parameters:
[in]playerThe handle to the media player
[out]enabledThe audio pitch control status (default: false)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_AVAILABLENot available
See also:
player_audio_pitch_set_enabled()
player_audio_pitch_set_value()
player_audio_pitch_get_value()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
player_set_audio_codec_type()
player_get_audio_codec_type()
int player_audio_pitch_set_enabled ( player_h  player,
bool  enabled 
)

Enables or disables controlling the pitch of audio.

Since :
5.5
Remarks:
This function is used for audio content only.
Enabling pitch control could increase the CPU usage on some devices.
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE and this will not work at all even if this was called before enabling offload.
This function could be unavailable depending on the audio codec type and this will return PLAYER_ERROR_NOT_AVAILABLE.
Parameters:
[in]playerThe handle to the media player
[in]enabledThe new audio pitch control status (default: false)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_AVAILABLENot available
Precondition:
The player state must be PLAYER_STATE_IDLE.
See also:
player_audio_pitch_is_enabled()
player_audio_pitch_set_value()
player_audio_pitch_get_value()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
player_set_audio_codec_type()
player_get_audio_codec_type()
int player_audio_pitch_set_value ( player_h  player,
float  value 
)

Sets the pitch of audio.

Since :
5.5
Remarks:
This function is used for audio content only.
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE and this will not work at all even if this was called before enabling offload.
This function could be unavailable depending on the audio codec type and this will return PLAYER_ERROR_NOT_AVAILABLE.
Parameters:
[in]playerThe handle to the media player
[in]valueThe audio stream pitch value
Valid range is 0.5~2. Default value is 1.
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_AVAILABLENot available
Precondition:
The pitch control must be enabled by calling player_audio_pitch_set_enabled() function.
See also:
player_audio_pitch_set_enabled()
player_audio_pitch_is_enabled()
player_audio_pitch_get_value()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
player_set_audio_codec_type()
player_get_audio_codec_type()
int player_capture_video ( player_h  player,
player_video_captured_cb  callback,
void *  user_data 
)

Captures the video frame, asynchronously.

Since :
2.3
Remarks:
If the content is encrypted or there are copyright issues with it, this function could be unsupported depending on the DRM policy. In case the function is not supported by the DRM policy, it will return an error.
Parameters:
[in]playerThe handle to the media player
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
Precondition:
The player state must be set to PLAYER_STATE_PLAYING by calling player_start() or set to PLAYER_STATE_PAUSED by calling player_pause().
Video display type should be set by calling player_set_display() otherwise, audio stream is only processed even though video file is set.
Postcondition:
It invokes player_video_captured_cb() when capture completes, if you set a callback.
See also:
player_video_captured_cb()
int player_create ( player_h player)

Creates a player handle for playing multimedia content.

Since :
2.3
Remarks:
You must release player by using player_destroy().
Although you can create multiple player handles at the same time, the player cannot guarantee proper operation because of limited resources, such as audio or display device.
Parameters:
[out]playerA new handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_OUT_OF_MEMORYOut of memory
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_RESOURCE_LIMITCannot create more instance due to resource(socket, thread, etc) limitation on system.
Postcondition:
The player state will be PLAYER_STATE_IDLE.
See also:
player_destroy()
int player_destroy ( player_h  player)

Destroys the media player handle and releases all its resources.

Since :
2.3
Remarks:
To completely shutdown player operation, call this function with a valid player handle from any player state.
Parameters:
[in]playerThe handle to the media player to be destroyed
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
Precondition:
The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.
Postcondition:
The player state will be PLAYER_STATE_NONE.
See also:
player_create()

Retrieves all supported media formats for the playback of external media stream.

The supported media format can vary depending on the device capabilities.

Since :
5.5
Parameters:
[in]playerThe handle to the media player
[in]callbackThe iteration callback function
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_supported_media_format_cb()
player_set_media_stream_info()
player_push_media_stream()
int player_get_audio_codec_type ( player_h  player,
player_codec_type_e codec_type 
)

Gets the default codec type of the audio decoder.

Since :
5.5
Parameters:
[in]playerThe handle to the media player
[out]codec_typeThe default codec type
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_set_audio_codec_type()
int player_get_audio_latency_mode ( player_h  player,
audio_latency_mode_e latency_mode 
)

Gets the current audio latency mode.

Since :
2.3
Remarks:
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE. (Since 5.5)
Parameters:
[in]playerThe handle to the media player
[out]latency_modeThe latency mode to get from the audio
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_AVAILABLENot available (Since 5.5)
See also:
audio_latency_mode_e
player_set_audio_latency_mode()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
int player_get_current_track ( player_h  player,
player_stream_type_e  type,
int *  index 
)

Gets current track index.

Index starts from 0.

Since :
2.4
Remarks:
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE. (Since 5.5)
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream which is PLAYER_STREAM_TYPE_AUDIO or PLAYER_STREAM_TYPE_TEXT
[out]indexThe index of track
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_NOT_AVAILABLENot available (Since 5.5)
Precondition:
The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED
See also:
player_audio_offload_set_enabled()
int player_get_media_stream_buffer_max_size ( player_h  player,
player_stream_type_e  type,
unsigned long long *  max_size 
)

Gets the max size bytes of buffer.

Since :
2.4
Remarks:
This function is used for media stream playback only.
If the buffer level over the max size, player_media_stream_buffer_status_cb() will be invoked with overflow status.
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream
[out]max_sizeThe max bytes of buffer
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
See also:
player_set_media_stream_buffer_max_size()
player_media_stream_buffer_status_cb()
int player_get_media_stream_buffer_min_threshold ( player_h  player,
player_stream_type_e  type,
unsigned int *  percent 
)

Gets the buffer threshold percent of buffer.

Since :
2.4
Remarks:
This function is used for media stream playback only.
If the buffer level drops below the percent value, player_media_stream_buffer_status_cb() will be invoked with underrun status.
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream
[out]percentThe minimum threshold(0~100) of buffer
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
See also:
player_set_media_stream_buffer_min_threshold()
player_media_stream_buffer_status_cb()
int player_get_play_position ( player_h  player,
int *  milliseconds 
)

Gets the current position in milliseconds.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[out]millisecondsThe current position in milliseconds
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_SEEK_FAILEDSeek operation failure
See also:
player_set_play_position()
player_set_play_position_nsec()
player_get_play_position_nsec()
int player_get_play_position_nsec ( player_h  player,
int64_t *  nanoseconds 
)

Gets the current position in nanoseconds.

Since :
5.0
Parameters:
[in]playerThe handle to the media player
[out]nanosecondsThe current position in nanoseconds
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_SEEK_FAILEDSeek operation failure
See also:
player_set_play_position()
player_get_play_position()
player_set_play_position_nsec()
int player_get_state ( player_h  player,
player_state_e state 
)

Gets the player's current state.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[out]stateThe current state of the player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
See also:
player_state_e
int player_get_track_count ( player_h  player,
player_stream_type_e  type,
int *  count 
)

Gets the track count.

Since :
2.4
Remarks:
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE. (Since 5.5)
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream which is PLAYER_STREAM_TYPE_AUDIO or PLAYER_STREAM_TYPE_TEXT
[out]countThe number of track
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_NOT_AVAILABLENot available (Since 5.5)
Precondition:
The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED
See also:
player_audio_offload_set_enabled()
int player_get_track_language_code ( player_h  player,
player_stream_type_e  type,
int  index,
char **  code 
)

Gets language code of a track.

Since :
2.4
Remarks:
code must be released with free() by caller
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE. (Since 5.5)
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream which is PLAYER_STREAM_TYPE_AUDIO or PLAYER_STREAM_TYPE_TEXT
[in]indexThe index of track
[out]codeA language code in ISO 639-1. "und" will be returned if the language is undefined.
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_NOT_AVAILABLENot available (Since 5.5)
Precondition:
The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED
See also:
player_audio_offload_set_enabled()
int player_get_video_roi_area ( player_h  player,
double *  x_scale,
double *  y_scale,
double *  w_scale,
double *  h_scale 
)

Gets the ROI (Region Of Interest) area of the content video source.

Since :
5.0
Remarks:
This function gets the ratio value of the each coordinate and size based on the video resolution size.
The ROI area is valid only in PLAYER_DISPLAY_TYPE_OVERLAY.
Parameters:
[in]playerThe handle to the media player
[out]x_scaleThe current X coordinate ratio value of the video source area based on the video width size
[out]y_scaleThe current Y coordinate ratio value of the video source area based on the video height size
[out]w_scaleThe current width ratio value of the video source area based on the video width size
[out]h_scaleThe current height ratio value of the video source area based on the video height size
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_display_type_e
player_set_display()
player_get_video_size()
player_set_video_roi_area()
int player_get_volume ( player_h  player,
float *  left,
float *  right 
)

Gets the player's current volume factor.

The range of left and right is from 0 to 1.0, inclusive (1.0 = 100%). This function gets the player volume, not the system volume. To get the system volume, use the Sound Manager API.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[out]leftThe current left volume scalar
[out]rightThe current right volume scalar
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_set_volume()
int player_is_audio_only ( player_h  player,
bool *  audio_only 
)

Gets the audio only mode status.

Since :
4.0
Parameters:
[in]playerThe handle to the media player
[out]audio_onlyThe current audio only status: (true = audio only enabled, false = audio only disabled)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_set_audio_only()
int player_is_looping ( player_h  player,
bool *  looping 
)

Gets the player's looping status.

If the looping status is true, playback automatically restarts upon finishing. If it is false, it won't.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[out]loopingThe looping status: (true = looping, false = non-looping )
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_set_looping()
int player_is_muted ( player_h  player,
bool *  muted 
)

Gets the player's mute status.

If the mute status is true, no sounds are played. If it is false, sounds are played at the previously set volume level.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[out]mutedThe current mute status: (true = mute, false = not muted)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_set_mute()
int player_is_replaygain_enabled ( player_h  player,
bool *  enabled 
)

Gets the player's replaygain status.

Since :
5.0
Remarks:
Depending on audio codec type or by enabling audio offload, this function could be unavailable and this will return PLAYER_ERROR_NOT_AVAILABLE. (Since 5.5)
Parameters:
[in]playerThe handle to the media player
[out]enabledPointer to store current replaygain status: (true = enabled replaygain, false = disabled replaygain)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_AVAILABLENot available (Since 5.5)
See also:
player_set_replaygain_enabled()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
player_set_audio_codec_type()
player_get_audio_codec_type()
int player_pause ( player_h  player)

Pauses the player.

Since :
2.3
Remarks:
You can resume playback using player_start().
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid state
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_SOUND_POLICYSound policy error
Precondition:
The player state must be set to PLAYER_STATE_PLAYING.
Postcondition:
The player state will be PLAYER_STATE_PAUSED.
See also:
player_start()
int player_prepare ( player_h  player)

Prepares the media player for playback.

Since :
2.3
Remarks:
The mediastorage privilege(http://tizen.org/privilege/mediastorage) must be added if any video/audio files are used to play located in the internal storage.
The externalstorage privilege(http://tizen.org/privilege/externalstorage) must be added if any video/audio files are used to play located in the external storage.
The internet privilege(http://tizen.org/privilege/internet) must be added if any URLs are used to play from network.
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_URIInvalid URI
PLAYER_ERROR_NO_SUCH_FILEFile not found
PLAYER_ERROR_NOT_SUPPORTED_FILEFile not supported
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_PERMISSION_DENIEDPermission denied
PLAYER_ERROR_NOT_SUPPORTED_AUDIO_CODECNot support audio codec format (Since 4.0)
PLAYER_ERROR_NOT_SUPPORTED_VIDEO_CODECNot support video codec format (Since 4.0)
Precondition:
The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare(). After that, call player_set_uri() to load the media content you want to play.
Postcondition:
The player state will be PLAYER_STATE_READY.
See also:
player_prepare_async()
player_unprepare()
player_set_uri()
int player_prepare_async ( player_h  player,
player_prepared_cb  callback,
void *  user_data 
)

Prepares the media player for playback, asynchronously.

Since :
2.3
Remarks:
The mediastorage privilege(http://tizen.org/privilege/mediastorage) must be added if any video/audio files are used to play located in the internal storage. The externalstorage privilege(http://tizen.org/privilege/externalstorage) must be added if any video/audio files are used to play located in the external storage. The internet privilege(http://tizen.org/privilege/internet) must be added if any URLs are used to play from network.
Since 5.0: To cancel the asynchronous preparing, call player_unprepare() even in PLAYER_STATE_IDLE state.
Parameters:
[in]playerThe handle to the media player
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_URIInvalid URI
PLAYER_ERROR_NO_SUCH_FILEFile not found
PLAYER_ERROR_NOT_SUPPORTED_FILEFile not supported
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_PERMISSION_DENIEDPermission denied
Precondition:
The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare(). After that, call player_set_uri() to load the media content you want to play.
Postcondition:
It invokes player_prepared_cb() when playback is prepared.
See also:
player_prepare()
player_prepared_cb()
player_unprepare()
player_set_uri()
int player_push_media_stream ( player_h  player,
media_packet_h  packet 
)

Pushes elementary stream to decode audio or video.

Since :
2.4
Remarks:
player_set_media_stream_info() must be called before using this function.
The available buffer size can be set by calling player_set_media_stream_buffer_max_size(). If there is no available buffer space, this function will return error since 3.0.
Parameters:
[in]playerThe handle to media player
[in]packetThe media packet to decode
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_STATEInvalid state
PLAYER_ERROR_NOT_SUPPORTED_FILEFile not supported
PLAYER_ERROR_BUFFER_SPACENo buffer space available (since 3.0)
PLAYER_ERROR_INVALID_OPERATIONInvalid operation (since 3.0)
Precondition:
The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING or PLAYER_STATE_PAUSED.
See also:
player_set_media_stream_info()
player_set_media_stream_buffer_max_size()
int player_select_track ( player_h  player,
player_stream_type_e  type,
int  index 
)

Selects a track to play.

Since :
2.4
Remarks:
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE. (Since 5.5)
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream which is PLAYER_STREAM_TYPE_AUDIO or PLAYER_STREAM_TYPE_TEXT
[in]indexThe index of track
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_NOT_AVAILABLENot available (Since 5.5)
Precondition:
The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED
See also:
player_get_current_track()
player_audio_offload_set_enabled()
int player_set_audio_codec_type ( player_h  player,
player_codec_type_e  codec_type 
)

Sets the default codec type of the audio decoder.

Since :
5.5
Remarks:
The default codec type could be different depending on the device capability. S/W codec type is supported basically.
If selected H/W audio codec type does not support in some cases, S/W audio codec type could be used instead.
If application use the H/W audio codec type by default, following functions should be called after setting codec type because the availability could be changed depending on the codec capability. :
player_audio_effect_equalizer_is_available()
player_set_media_packet_audio_frame_decoded_cb()
player_unset_media_packet_audio_frame_decoded_cb()
player_set_replaygain_enabled()
player_is_replaygain_enabled()
player_audio_pitch_set_enabled()
player_audio_pitch_is_enabled()
player_audio_pitch_set_value()
player_audio_pitch_get_value()
Parameters:
[in]playerThe handle to the media player
[in]codec_typeThe default codec type
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_NOT_SUPPORTED_AUDIO_CODECNot support audio codec type
Precondition:
The player state must be PLAYER_STATE_IDLE by player_create() or player_unprepare().
See also:
player_get_audio_codec_type()
int player_set_audio_latency_mode ( player_h  player,
audio_latency_mode_e  latency_mode 
)

Sets the audio latency mode.

Since :
2.3
Remarks:
The default audio latency mode of the player is AUDIO_LATENCY_MODE_MID. To get the current audio latency mode, use player_get_audio_latency_mode(). If it's high mode, audio output interval can be increased so, it can keep more audio data to play. But, state transition like pause or resume can be more slower than default(mid) mode.
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE and this will not work at all even if it was called before enabling offload. (Since 5.5)
Parameters:
[in]playerThe handle to the media player
[in]latency_modeThe latency mode to be applied to the audio
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_AVAILABLENot available (Since 5.5)
See also:
audio_latency_mode_e
player_get_audio_latency_mode()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
int player_set_audio_only ( player_h  player,
bool  audio_only 
)

Sets the audio only mode.

This function is used to disable or enable video rendering during playback.

Since :
4.0
Parameters:
[in]playerThe handle to the media player
[in]audio_onlyThe new audio only status: (true = enable audio only, false = disable audio only)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
Precondition:
The player state must be one of: PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.
See also:
player_is_audio_only()
int player_set_completed_cb ( player_h  player,
player_completed_cb  callback,
void *  user_data 
)

Sets a callback function to be invoked when the playback is finished.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
Postcondition:
player_completed_cb() will be invoked.
See also:
player_unset_completed_cb()
player_completed_cb()
player_start()
int player_set_display ( player_h  player,
player_display_type_e  type,
player_display_h  display 
)

Sets the video display.

Since :
2.3
Remarks:
To get display to set, use GET_DISPLAY().
We are not supporting changing display.
This function must be called before calling the player_prepare() or player_prepare_async()
to reflect the display type.
This function must be called in main thread of application. Otherwise, it will return PLAYER_ERROR_INVALID_OPERATION by internal restriction. To avoid PLAYER_ERROR_INVALID_OPERATION in sub thread, ecore_thread_main_loop_begin() and ecore_thread_main_loop_end() can be used, but deadlock can be also occurred if main thread is busy. So, it's not recommended to use them. (since 5.0)
Parameters:
[in]playerThe handle to the media player
[in]typeThe display type
[in]displayThe handle to display
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
Precondition:
The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().
See also:
player_display_type_e
player_set_display_mode()
player_set_display_roi_area()
player_set_display_visible()
player_set_display_rotation()
ecore_thread_main_loop_begin()
ecore_thread_main_loop_end()
int player_set_error_cb ( player_h  player,
player_error_cb  callback,
void *  user_data 
)

Sets a callback function to be invoked when an error occurs.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
Postcondition:
player_error_cb() will be invoked.
See also:
player_unset_error_cb()
player_error_cb()
int player_set_interrupted_cb ( player_h  player,
player_interrupted_cb  callback,
void *  user_data 
)

Sets a callback function to be invoked when the playback is interrupted or the interrupt is completed.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
Postcondition:
player_interrupted_cb() will be invoked.
See also:
player_unset_interrupted_cb()
player_interrupted_code_e
player_interrupted_cb()
int player_set_looping ( player_h  player,
bool  looping 
)

Sets the player's looping status.

If the looping status is true, playback automatically restarts upon finishing. If it is false, it won't. The default value is false.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[in]loopingThe new looping status: (true = looping, false = non-looping )
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_is_looping()

Sets a callback function for getting the decoded audio data.

This function is used to get audio PCM data of input media content via registered callback.
An application can specify the output PCM format by Media Format API.

Since :
5.5
Remarks:
This function must be called before calling player_prepare() or player_prepare_async().
A registered callback is called in a separate thread (not in the main loop).
The audio PCM data can be retrieved using a registered callback as a media packet and it is available until it's destroyed by media_packet_destroy().
The packet has to be destroyed as quickly as possible after rendering the data
and all the packets have to be destroyed before player_unprepare() is called.
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE and this will not work at all even if this was called before enabling offload.
This function could be unavailable depending on the audio codec type and this will return PLAYER_ERROR_NOT_AVAILABLE.
If the content is encrypted or there are copyright issues with it, this function could be unsupported depending on the DRM policy.
Parameters:
[in]playerThe handle to the media player
[in]formatThe media format handle about required audio PCM specification. This format has to include PCM MIME type, audio channel and sampling rate. If the format is NULL, the original PCM format or platform default PCM format will be applied.
[in]optThe audio extract option
[in]callbackThe callback function to be registered
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_STATEInvalid state
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_AVAILABLENot available
Precondition:
The player's state must be PLAYER_STATE_IDLE.
See also:
player_unset_media_packet_audio_frame_decoded_cb()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
player_set_audio_codec_type()
player_get_audio_codec_type()
Example
      #include <player.h>
      #include <media_format.h>
       ...
       player_h player = NULL;
       media_format_h a_format = NULL;
       ...
       media_format_create(&a_format);
       media_format_set_audio_mime(a_format, MEDIA_FORMAT_PCM_F32LE);
       media_format_set_audio_channel(a_format, 2);
       media_format_set_audio_samplerate(a_format, 44100);

       player_set_media_packet_audio_frame_decoded_cb(player, a_format, PLAYER_AUDIO_EXTRACT_DEFAULT, _audio_pcm_cb, udata);

       media_format_unref(a_format);
       ...

Sets a callback function for getting the decoded video frame.

Since :
2.3
Remarks:
This function must be called before calling player_prepare() or player_prepare_async().
A registered callback is called in a separate thread (not in the main loop).
A video frame can be retrieved using a registered callback as a media packet.
The callback function holds the same buffer that will be drawn on the display device.
So if you change the media packet in a registered callback, it will be displayed on the device
and the media packet is available until it's destroyed by media_packet_destroy().
The packet have to be destroyed as quickly as possible after rendering the packet
and all the packets have to be destroyed before player_unprepare() is called.
If the content is encrypted or there are copyright issues with it, this function could be unsupported depending on the DRM policy.
Parameters:
[in]playerThe handle to the media player
[in]callbackThe callback function to be registered
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_STATEInvalid state
Precondition:
The player's state must be PLAYER_STATE_IDLE. And, PLAYER_DISPLAY_TYPE_NONE must be set by calling player_set_display().
See also:
player_unset_media_packet_video_frame_decoded_cb()
int player_set_media_stream_buffer_max_size ( player_h  player,
player_stream_type_e  type,
unsigned long long  max_size 
)

Sets the max size bytes of buffer.

Since :
2.4
Remarks:
This function is used for media stream playback only.
If the buffer level over the max size, player_media_stream_buffer_status_cb() will be invoked with overflow status.
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream
[in]max_sizeThe max bytes of buffer, it has to be bigger than zero. (default: 200000)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
See also:
player_get_media_stream_buffer_max_size()
player_media_stream_buffer_status_cb()
int player_set_media_stream_buffer_min_threshold ( player_h  player,
player_stream_type_e  type,
unsigned int  percent 
)

Sets the buffer threshold percent of buffer.

Since :
2.4
Remarks:
This function is used for media stream playback only.
If the buffer level drops below the percent value, player_media_stream_buffer_status_cb() will be invoked with underrun status.
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream
[in]percentThe minimum threshold(0~100) of buffer (default: 0)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
See also:
player_get_media_stream_buffer_min_threshold()
player_media_stream_buffer_status_cb()

Sets a callback function to be invoked when buffer underrun or overflow is occurred.

Since :
2.4
Remarks:
This function is used for media stream playback only.
The callback is called in a separate thread (not in the main loop).
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream
[in]callbackThe buffer status callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
Precondition:
The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().
Postcondition:
player_media_stream_buffer_status_cb() will be invoked.
See also:
player_unset_media_stream_buffer_status_cb()
player_media_stream_buffer_status_cb()

Sets contents information for media stream.

Since :
2.4
Remarks:
AV format must be set before pushing elementary stream with player_push_media_stream().
This function must be called before calling the player_prepare() or player_prepare_async() to reflect the media information.
The supported media format MIME type can be checked by calling player_foreach_media_stream_supported_format(). (Since 5.5)
Parameters:
[in]playerThe handle to media player
[in]typeThe type of target stream
[in]formatThe media format to set media information
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_STATEInvalid state
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_SUPPORTED_FORMATNot supported format (Since 5.5)
Precondition:
The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().
See also:
player_push_media_stream()
player_foreach_media_stream_supported_format()
int player_set_media_stream_seek_cb ( player_h  player,
player_stream_type_e  type,
player_media_stream_seek_cb  callback,
void *  user_data 
)

Sets a callback function to be invoked when seeking is occurred.

Since :
2.4
Remarks:
This function is used for media stream playback only.
The callback is called in a separate thread (not in the main loop).
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
Precondition:
The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().
Postcondition:
player_media_stream_seek_cb() will be invoked.
See also:
player_unset_media_stream_seek_cb()
player_media_stream_seek_cb()
int player_set_memory_buffer ( player_h  player,
const void *  data,
int  size 
)

Sets memory as the data source.

Associates media content, cached in memory, with the player. Unlike the case of player_set_uri(), the media resides in memory. If the function call is successful, subsequent calls to player_prepare() and player_start() will start playing the media.

Since :
2.3
Remarks:
If you provide an invalid data, you won't receive an error message until you call player_start().
This function must be called before calling the player_prepare() or player_prepare_async() to build the player based on the data.
Parameters:
[in]playerThe handle to the media player
[in]dataThe memory pointer of media data
[in]sizeThe size of media data
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
Precondition:
The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().
See also:
player_set_uri()
int player_set_mute ( player_h  player,
bool  muted 
)

Sets the player's mute status.

If the mute status is true, no sounds are played. If it is false, sounds are played at the previously set volume level. Until this function is called, by default the player is not muted.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[in]mutedThe new mute status: (true = mute, false = not muted)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_is_muted()
int player_set_play_position ( player_h  player,
int  milliseconds,
bool  accurate,
player_seek_completed_cb  callback,
void *  user_data 
)

Sets the seek position for playback, asynchronously.

Since :
2.3
Remarks:
This function will trigger the seeking operation on player instance like in the case of player_set_play_position_nsec(). Normally application needs to wait for player_seek_completed_cb() before calling setting position function again. Otherwise it will return PLAYER_ERROR_SEEK_FAILED.
Calling player_pause() or player_start() before player_seek_completed_cb() is invoked will cause PLAYER_ERROR_INVALID_OPERATION to be returned.
Please note that if application is playing external media data via player_set_media_stream_info(), then consecutive calling of this function will always succeed and there is no need to wait for player_seek_completed_cb() before next calling of this function.(Since 3.0)
Even if you don't set visible to true by calling player_set_display_visible(), the video will be shown when the player_seek_completed_cb() is invoked.
In case of non-seekable content, the function will return PLAYER_ERROR_INVALID_OPERATION and the player will keep playing without changing the play position.
Parameters:
[in]playerThe handle to the media player
[in]millisecondsThe position in milliseconds from the start to the seek point
[in]accurateIf true the nearest frame position is returned, but this might be considerably slow, if false the nearest key frame position is returned, this might be faster but less accurate.
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_SEEK_FAILEDSeek operation failure
Precondition:
The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.
Postcondition:
It invokes player_seek_completed_cb() when seek operation completes, if you set a callback.
See also:
player_get_play_position()
player_set_play_position_nsec()
player_get_play_position_nsec()
int player_set_play_position_nsec ( player_h  player,
int64_t  nanoseconds,
bool  accurate,
player_seek_completed_cb  callback,
void *  user_data 
)

Sets the seek position in nanoseconds for playback, asynchronously.

Since :
5.0
Remarks:
This function will trigger the seeking operation on player instance like in the case of player_set_play_position(). Normally application needs to wait for player_seek_completed_cb() before calling setting position function again. Otherwise it will return PLAYER_ERROR_SEEK_FAILED.
Calling player_pause() or player_start() before player_seek_completed_cb() is invoked will cause PLAYER_ERROR_INVALID_OPERATION to be returned.
Please note that if application is playing external media data via player_set_media_stream_info(), then consecutive calling of this function will always succeed and there is no need to wait for player_seek_completed_cb() before next calling of this function.
Even if you don't set visible to true by calling player_set_display_visible(), the video will be shown when the player_seek_completed_cb() is invoked.
In case of non-seekable content, the function will return PLAYER_ERROR_INVALID_OPERATION and the player will keep playing without changing the play position.
Parameters:
[in]playerThe handle to the media player
[in]nanosecondsThe position in nanoseconds from the start to the seek point
[in]accurateIf true the nearest frame position is returned, but this might be considerably slow, if false the nearest key frame position is returned, this might be faster but less accurate.
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_SEEK_FAILEDSeek operation failure
Precondition:
The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.
Postcondition:
It invokes player_seek_completed_cb() when seek operation completes, if you set a callback.
See also:
player_set_play_position()
player_get_play_position()
player_get_play_position_nsec()
int player_set_playback_rate ( player_h  player,
float  rate 
)

Sets the playback rate.

The default value is 1.0.

Since :
2.3
Remarks:
PLAYER_ERROR_INVALID_OPERATION occurs when streaming playback.
No operation is performed, if rate is 0.
The sound is muted, when playback rate is under 0.0 and over 2.0.
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE. (Since 5.5)
Parameters:
[in]playerThe handle to the media player
[in]rateThe playback rate (-5.0x ~ 5.0x)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_NOT_AVAILABLENot available (Since 5.5)
Precondition:
The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.
See also:
player_audio_offload_set_enabled()
int player_set_replaygain_enabled ( player_h  player,
bool  enabled 
)

Sets the player's replaygain status.

If the replaygain status is true, replaygain is applied (if contents has a replaygain tag). If it is false, the replaygain isn't affected by tag and properties.

Since :
5.0
Remarks:
If audio offload is enabled by calling player_audio_offload_set_enabled(), this function will return PLAYER_ERROR_NOT_AVAILABLE and this will not work at all even if this was called before enabling offload. (Since 5.5)
This function could be unavailable depending on the audio codec type and this will return PLAYER_ERROR_NOT_AVAILABLE. (Since 5.5)
Parameters:
[in]playerThe handle to the media player
[in]enabledThe new replaygain status: (true = enable, false = disable)
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_NOT_AVAILABLENot available (Since 5.5)
See also:
player_is_replaygain_enabled()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
player_set_audio_codec_type()
player_get_audio_codec_type()
int player_set_sound_stream_info ( player_h  player,
sound_stream_info_h  stream_info 
)

Sets the player's sound manager stream information.

Since :
3.0
Remarks:
You can set sound stream information including audio routing and volume type. For more details, please refer to sound_manager.h
This function must be called before calling the player_prepare() or player_prepare_async() to reflect the sound stream information when the player is building.
This function is related to the following feature:
http://tizen.org/feature/multimedia.player.stream_info
If this feature is not supported, the stream_type of the player is fixed to the SOUND_STREAM_TYPE_MEDIA.
Parameters:
[in]playerThe handle to the media player
[in]stream_infoThe sound manager info type
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_FEATURE_NOT_SUPPORTED_ON_DEVICEUnsupported feature
Precondition:
The player state must be set to PLAYER_STATE_IDLE by calling player_create().
See also:
sound_stream_info_h
sound_manager_create_stream_information()
sound_manager_destroy_stream_information()
Example
       #include <player.h>
       #include <sound_manager.h>
       ...
       player_h player = NULL;
       sound_stream_info_h stream_info = NULL;
       sound_stream_type_e stream_type = SOUND_STREAM_TYPE_MEDIA;
       ...
       sound_manager_create_stream_information (stream_type, _focus_callback, use_data, &stream_info);
       player_create (&player);
       player_set_sound_stream_info (player, stream_info);
       ...
       player_prepare_async (player, _prepared_cb, udata);
       ...
int player_set_uri ( player_h  player,
const char *  uri 
)

Sets the data source (file-path, HTTP or RTSP URI) to use.

Associates media contents, referred to by the URI, with the player. If the function call is successful, subsequent calls to player_prepare() and player_start() will start playing the media.

Since :
2.3
Remarks:
If you use HTTP or RTSP, URI must start with "http://" or "rtsp://". The default protocol is "file://". If you provide an invalid URI, you won't receive an error message until you call player_start().
This function must be called before calling the player_prepare() or player_prepare_async() to build the player based on the URI information.
The mediastorage privilege(http://tizen.org/privilege/mediastorage) must be added if any video/audio files are used to play located in the internal storage.
The externalstorage privilege(http://tizen.org/privilege/externalstorage) must be added if any video/audio files are used to play located in the external storage.
The internet privilege(http://tizen.org/privilege/internet) must be added if any URLs are used to play from network.
Parameters:
[in]playerThe handle to the media player
[in]uriThe content location, such as the file path, the URI of the HTTP or RTSP stream you want to play
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_PERMISSION_DENIEDPermission denied
Precondition:
The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().
See also:
player_set_memory_buffer()
int player_set_video_roi_area ( player_h  player,
double  x_scale,
double  y_scale,
double  w_scale,
double  h_scale 
)

Sets the ROI (Region Of Interest) area of the content video source.

This function is to set the ROI area of video content to render it on PLAYER_DISPLAY_TYPE_OVERLAY display with current display mode. It can be regarded as zooming operation because the selected video area will be rendered fit to the display.

Since :
5.0
Remarks:
This function requires the ratio value of the each coordinate and size based on the video resolution size to consider the dynamic resolution video content.
This function have to be called after calling player_set_display() and the ROI area is valid only in PLAYER_DISPLAY_TYPE_OVERLAY.
Parameters:
[in]playerThe handle to the media player
[in]x_scaleX coordinate ratio value of the video source area based on the video width size
Valid range is 0.0~1.0.
[in]y_scaleY coordinate ratio value of the video source area based on the video height size
Valid range is 0.0~1.0.
[in]w_scaleWidth ratio value of the video source area based on the video width size
Valid range is from greater than 0.0 to 1.0.
[in]h_scaleHeight ratio value of the video source area based on the video height size
Valid range is from greater than 0.0 to 1.0.
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_display_type_e
player_set_display()
player_set_display_mode()
player_get_video_size()
player_get_video_roi_area()
Example
       #include <player.h>
       ...
       player_h player = NULL;
       player_display_h display = NULL;
       int width = 0, height = 0;
       ...
       player_set_display (player, PLAYER_DISPLAY_TYPE_OVERLAY, display);
       player_get_video_size (player, &width, &height);
       ...
       player_set_video_roi_area (30/(double)width, 30/(double)height, 480/(double)width, 270/(double)height);
       ...
int player_set_volume ( player_h  player,
float  left,
float  right 
)

Sets the player's volume.

Setting this volume adjusts the player's instance volume, not the system volume. The valid range is from 0 to 1.0, inclusive (1.0 = 100%). Default value is 1.0. To change system volume, use the Sound Manager API. Finally, it does not support to set other value into each channel currently.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
[in]leftThe left volume scalar
[in]rightThe right volume scalar
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_get_volume()
int player_start ( player_h  player)

Starts or resumes playback.

Plays current media content, or resumes playback if the player is paused or buffering during HTTP streaming play.

Since :
2.3
Remarks:
Even if you don't set visible to true by calling player_set_display_visible(), the video will be shown on PLAYER_STATE_PLAYING state.
Since 3.0:
Sound can be mixed with other sounds, if you don't control the stream focus in sound-manager module.
You can refer to Sound Manager.
Since 5.0:
In case of HTTP streaming playback, the player could be internally paused for buffering. If the application calls this function during the buffering, the playback will be resumed by force and the buffering message posting by player_buffering_cb() will be stopped.
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_CONNECTION_FAILEDNetwork connection failed
PLAYER_ERROR_SOUND_POLICYSound policy error
Precondition:
Before 5.0: The player state must be PLAYER_STATE_READY or PLAYER_STATE_PAUSED.
Since 5.0: The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.
Postcondition:
The player state will be PLAYER_STATE_PLAYING.
It invokes player_completed_cb() when playback completes, if you set a callback with player_set_completed_cb().
See also:
player_prepare()
player_prepare_async()
player_stop()
player_pause()
player_set_completed_cb()
player_completed_cb()
player_set_display_visible()
player_set_buffering_cb()
player_buffering_cb()
int player_stop ( player_h  player)

Stops playing media content.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid state
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
PLAYER_ERROR_SOUND_POLICYSound policy error
Precondition:
The player state must be set to PLAYER_STATE_PLAYING by calling player_start() or set to PLAYER_STATE_PAUSED by calling player_pause().
Postcondition:
The player state will be PLAYER_STATE_READY.
See also:
player_start()
player_pause()
int player_unprepare ( player_h  player)

Resets the media player.

The most recently used media is reset and no longer associated with the player. Playback is no longer possible. If you want to use the player again, you must set the data URI and call player_prepare() again.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
PLAYER_ERROR_INVALID_STATEInvalid player state
Precondition:
Before 5.0: The player state must be one of: PLAYER_STATE_READY, PLAYER_STATE_PLAYING, PLAYER_STATE_PAUSED.
Since 5.0: The player state must be one of: PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, PLAYER_STATE_PAUSED. PLAYER_STATE_IDLE is allowed only if player preparation was started with player_prepare_async().
Postcondition:
The player state will be PLAYER_STATE_IDLE.
See also:
player_prepare()

Unsets the playback completed callback function.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_set_completed_cb()

Unsets the error callback function.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_set_error_cb()

Unsets the interrupted callback function.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_OPERATIONInvalid operation
See also:
player_set_interrupted_cb()

Unsets the callback notifying the decoded audio data.

Since :
5.5
Remarks:
Depending on the audio codec type or by enabling audio offload, this function could be unavailable and this will return PLAYER_ERROR_NOT_AVAILABLE.
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
PLAYER_ERROR_INVALID_STATEInvalid state
PLAYER_ERROR_NOT_AVAILABLENot available
Precondition:
The player's state must be PLAYER_STATE_READY or PLAYER_STATE_IDLE
See also:
player_set_media_packet_audio_frame_decoded_cb()
player_audio_offload_set_enabled()
player_audio_offload_is_enabled()
player_set_audio_codec_type()
player_get_audio_codec_type()

Unsets the callback notifying the decoded video frame.

Since :
2.3
Parameters:
[in]playerThe handle to the media player
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
Precondition:
The player's state must be PLAYER_STATE_READY or PLAYER_STATE_IDLE
See also:
player_set_media_packet_video_frame_decoded_cb()

Unsets the buffer status callback function.

Since :
2.4
Remarks:
This function is used for media stream playback only.
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
See also:
player_set_media_stream_buffer_status_cb()

Unsets the seek callback function.

Since :
2.4
Parameters:
[in]playerThe handle to the media player
[in]typeThe type of target stream
Returns:
0 on success, otherwise a negative error value
Return values:
PLAYER_ERROR_NONESuccessful
PLAYER_ERROR_INVALID_PARAMETERInvalid parameter
See also:
player_set_media_stream_seek_cb()