Warning:: This is a very low level tool, in most situations (for example if you're using evas) you won't need this.

Basic usage

Eina_Tiler is a tool to facilitate calculations of which areas are damaged and thus need to be re-rendered. The basic usage of Eina_Tiler is to give it the size of your canvas and a set of rectangular areas that need re-rendering, from that and using heuristics it'll tell you an efficient way to re-render in the form of a set of non-overlapping rectangles that covers the whole area that needs re-rendering.

The following is pseudo-code showing some simple use of Eina_Tiler:

 tiler = eina_tiler_new(MY_CANVAS_WIDTH, MY_CANVAS_HEIGHT);
 EINA_LIST_FOREACH(list_of_areas_that_need_re_rendering, l, rect)
   eina_tiler_add(tiler, rect);
 itr = eina_tiler_iterator_new(tiler);
 EINA_ITERATOR_FOREACH(itr, rect)
   my_function_that_repaints_areas_of_the_canvas(rect);

See also:: eina_tiler_new(); eina_tiler_rect_add(); eina_tiler_iterator_new()

Warning:: There are no guarantees that this will be the most efficient way to re-render for any particular case.

Grid Slicer

Grid slicer and Eina_Tiler are usually used together, that is however not necessary, they can be used independently. Grid slicer provides an easy API to divide an area in tiles which is useful in certain applications to divide the area that will be rendered into tiles. It's customary to, then create one Eina_Tiler for each tile.

The following is pseudo-code showing a very simplified use of grid slicer together with Eina_Tiler:

 itr = eina_tile_grid_slicer_iterator_new(0, 0, MY_CANVAS_WIDTH, MY_CANVAS_HEIGHT, TILE_WIDTH, TILE_HEIGHT);
 EINA_ITERATOR_FOREACH(itr, grid_info)
   {
      tiler = eina_tiler_new(grid_info->rect.w, grid_info->rect.w);
      EINA_LIST_FOREACH(list_of_areas_that_need_re_rendering_in_this_tile, l, rect)
        eina_tiler_add(tiler, rect);
      itr = eina_tiler_iterator_new(tiler);
      EINA_ITERATOR_FOREACH(itr, rect)
      my_function_that_repaints_areas_of_the_canvas(rect);
   }

See also:: eina_tiler_new(); eina_tiler_rect_add(); eina_tile_grid_slicer_setup(); eina_tile_grid_slicer_next(); eina_tile_grid_slicer_iterator_new()

Functions
Eina_Tiler *	eina_tiler_new (int w, int h)
	Creates a new tiler with `w` width and `h` height.
void	eina_tiler_free (Eina_Tiler *t)
	Frees a tiler.
void	eina_tiler_tile_size_set (Eina_Tiler *t, int w, int h)
	Sets the size of tiles for a tiler.
void	eina_tiler_area_size_set (Eina_Tiler *t, int w, int h)
	Changes the size of the area covered by the tiler.
void	eina_tiler_area_size_get (const Eina_Tiler t, int w, int *h)
	Gets the size of the area covered by the tiler.
void	eina_tiler_strict_set (Eina_Tiler *t, Eina_Bool strict)
	Defines if we need to follow a strict grid of tile or a loose one.
Eina_Bool	eina_tiler_empty (const Eina_Tiler *t)
	Tells if a tiler is empty or not.
Eina_Bool	eina_tiler_rect_add (Eina_Tiler t, const Eina_Rectangle r)
	Adds a rectangle to a tiler.
void	eina_tiler_rect_del (Eina_Tiler t, const Eina_Rectangle r)
	Removes a rectangle from a tiler.
void	eina_tiler_clear (Eina_Tiler *t)
	Removes all rectangles from tiles.
Eina_Iterator *	eina_tiler_iterator_new (const Eina_Tiler *t)
	Creates a iterator to access the tilers calculated rectangles.
Eina_Iterator *	eina_tile_grid_slicer_iterator_new (int x, int y, int w, int h, int tile_w, int tile_h)
	Creates a new Eina_Iterator that iterates over a list of tiles.
Eina_Bool	eina_tiler_union (Eina_Tiler dst, Eina_Tiler src)
	Gets the union of two tilers.
Eina_Bool	eina_tiler_subtract (Eina_Tiler dst, Eina_Tiler src)
	Subtracts two tilers.
Eina_Tiler *	eina_tiler_intersection (Eina_Tiler t1, Eina_Tiler t2)
	Gets the intersection of two tilers.
Eina_Bool	eina_tiler_equal (const Eina_Tiler t1, const Eina_Tiler t2)
	Gets whether two tilers are equal in rects or not.
static Eina_Bool	eina_tile_grid_slicer_next (Eina_Tile_Grid_Slicer slc, const Eina_Tile_Grid_Info *rect)
	Iterates over the tiles set by eina_tile_grid_slicer_setup().
static Eina_Bool	eina_tile_grid_slicer_setup (Eina_Tile_Grid_Slicer *slc, int x, int y, int w, int h, int tile_w, int tile_h)
	Sets up an Eina_Tile_Grid_Slicer struct.
Typedefs
typedef struct _Eina_Tiler	Eina_Tiler
typedef struct Eina_Tile_Grid_Info	Eina_Tile_Grid_Info

Typedef Documentation

Eina_Tile_Grid_Info

Grid type of a tiler.

Eina_Tiler

Tiler type.

Function Documentation

Eina_Iterator* eina_tile_grid_slicer_iterator_new	(	int	x,
		int	y,
		int	w,
		int	h,
		int	tile_w,
		int	tile_h
	)

Creates a new Eina_Iterator that iterates over a list of tiles.

Parameters:

[in]	x	X axis coordinate.
[in]	y	Y axis coordinate.
[in]	w	Width.
[in]	h	Height.
[in]	tile_w	Tile width.
[in]	tile_h	Tile height.

Returns:: A pointer to the Eina_Iterator. NULL on failure.

The region defined by x, y, w, h will be divided in to a grid of tiles of width tile_w and height tile_h, the returned iterator will iterate over every tile in the grid having as its data a Eina_Tile_Grid_Info.

Note:: This is a convenience function, iterating over the returned iterator is equivalent to calling eina_tile_grid_slicer_setup() and calling eina_tile_grid_slicer_next() until it returns EINA_FALSE.

Since :: 2.3

static Eina_Bool eina_tile_grid_slicer_next	(	Eina_Tile_Grid_Slicer *	slc,
		const Eina_Tile_Grid_Info **	rect
	)		`[static]`

Iterates over the tiles set by eina_tile_grid_slicer_setup().

Parameters:

[in,out]	slc	Pointer to an Eina_Tile_Grid_Slicer struct.
[out]	rect	Pointer to a struct Eina_Tile_Grid_Info *.

Returns:: EINA_TRUE if the current rect is valid. EINA_FALSE if there are no more rects to iterate over (and thus the current one isn't valid).

This functions iterates over each Eina_Tile_Grid_Info *rect of the grid. eina_tile_grid_slicer_setup() must be called first, and *rect is only valid if this function returns EINA_TRUE. Its content shouldn't be modified.

Note:: Consider using eina_tile_grid_slicer_iterator_new() instead.

static Eina_Bool eina_tile_grid_slicer_setup	(	Eina_Tile_Grid_Slicer *	slc,
		int	x,
		int	y,
		int	w,
		int	h,
		int	tile_w,
		int	tile_h
	)		`[static]`

Sets up an Eina_Tile_Grid_Slicer struct.

Parameters:

[out]	slc	Pointer to an Eina_Tile_Grid_Slicer struct.
[in]	x	X axis coordinate.
[in]	y	Y axis coordinate.
[in]	w	Width.
[in]	h	Height.
[in]	tile_w	Tile width.
[in]	tile_h	Tile height.

Returns:: A pointer to the Eina_Iterator, NULL on failure.

The region defined by x, y, w, h will be divided into a grid of tiles of width tile_w and height tile_h, slc can then be used with eina_tile_grid_slicer_next() to access each tile.

Note:: Consider using eina_tile_grid_slicer_iterator_new() instead.

void eina_tiler_area_size_get	(	const Eina_Tiler *	t,
		int *	w,
		int *	h
	)

Gets the size of the area covered by the tiler.

Parameters:

[in]	t	The tiler whose area size will be fetched.
[out]	w	Width of the area.
[out]	h	Height of the area.

Since (EFL) :: 1.8

Since :: 3.0f(2.3.1)

void eina_tiler_area_size_set	(	Eina_Tiler *	t,
		int	w,
		int	h
	)

Changes the size of the area covered by the tiler.

Parameters:

[in,out]	t	The tiler whose area size will be set.
[in]	w	Width of the area.
[in]	h	Height of the area.

Since (EFL) :: 1.8

Warning:: Must clear the tiler before changing its size.

Since :: 3.0f(2.3.1)

void eina_tiler_clear ( Eina_Tiler * t )

Removes all rectangles from tiles.

Parameters:

[in,out] t The tiler to clear.

See also:: eina_tiler_rect_del()

Since :: 2.3

Eina_Bool eina_tiler_empty ( const Eina_Tiler * t )

Tells if a tiler is empty or not.

Parameters:

[in] t The tiler to apply the strict rules to.

Returns:: EINA_TRUE when empty, EINA_FALSE when not.

Since (EFL) :: 1.8

Since :: 3.0f(2.3.1)

Eina_Bool eina_tiler_equal	(	const Eina_Tiler *	t1,
		const Eina_Tiler *	t2
	)

Gets whether two tilers are equal in rects or not.

Parameters:

[in]	t1	The first tiler.
[in]	t2	The second tiler.

Returns:: EINA_TRUE if equal, EINA_FALSE if unequal.

This function gets result of comparison for t1 and t2. It returns EINA_TRUE if tilers are equal.

Since (EFL) :: 1.11

Since :: 3.0f(2.3.1)

void eina_tiler_free ( Eina_Tiler * t )

Frees a tiler.

Parameters:

[in] t The tiler to free.

This function frees t. It does not free the memory allocated for the elements of t.

Since :: 2.3

Examples:: eina_tiler_01.c.

Eina_Tiler* eina_tiler_intersection	(	Eina_Tiler *	t1,
		Eina_Tiler *	t2
	)

Gets the intersection of two tilers.

Parameters:

[in]	t1	The first tile.
[in]	t2	The second tiler.

Returns:: A pointer of intersection result. NULL if intersection doesn't exist.

This function gets the intersection of two tilers t1 and t2. It returns a pointer of result if intersection of two tilers exists., otherwise returns NULL.

Since (EFL) :: 1.11

Since :: 3.0f(2.3.1)

Eina_Iterator* eina_tiler_iterator_new ( const Eina_Tiler * t )

Creates a iterator to access the tilers calculated rectangles.

Parameters:

[in] t The tiler to iterate over.

Returns:: A iterator containing Eina_Rectangle.

Since :: 2.3

Examples:: eina_tiler_01.c.

Eina_Tiler* eina_tiler_new	(	int	w,
		int	h
	)

Creates a new tiler with w width and h height.

Parameters:

[in]	w	Width of the tiler
[in]	h	Height of the tiler

Returns:: The newly created tiler

See also:: eina_tiler_free()

Since :: 2.3

Examples:: eina_tiler_01.c.

Eina_Bool eina_tiler_rect_add	(	Eina_Tiler *	t,
		const Eina_Rectangle *	r
	)

Adds a rectangle to a tiler.

Parameters:

[in,out]	t	The tiler in which to add a container.
[in]	r	The rectangle to be added.

Returns:: EINA_TRUE on success, EINA_FALSE on failure.

See also:: eina_tiler_rect_del()

Since :: 2.3

Examples:: eina_tiler_01.c.

void eina_tiler_rect_del	(	Eina_Tiler *	t,
		const Eina_Rectangle *	r
	)

Removes a rectangle from a tiler.

Parameters:

[in,out]	t	The tiler in which to add a container.
[in]	r	The rectangle to be removed.

See also:: eina_tiler_rect_add(); eina_tiler_clear()

Since :: 2.3

void eina_tiler_strict_set	(	Eina_Tiler *	t,
		Eina_Bool	strict
	)

Defines if we need to follow a strict grid of tile or a loose one.

Parameters:

[in,out]	t	The tiler to apply the strict rules to.
[in]	strict	Define if it will be strict or loose

By default it will be loose.

Since (EFL) :: 1.8

Since :: 3.0f(2.3.1)

Eina_Bool eina_tiler_subtract	(	Eina_Tiler *	dst,
		Eina_Tiler *	src
	)

Subtracts two tilers.

Parameters:

[in,out]	dst	The first tiler, will store the result.
[in]	src	The second tiler.

Returns:: EINA_TRUE on success, EINA_FALSE otherwise.

This function subtracts two tilers dst and src. The result is stored in dst. It returns EINA_TRUE if it succeeds.

Since (EFL) :: 1.11

Since :: 3.0f(2.3.1)

void eina_tiler_tile_size_set	(	Eina_Tiler *	t,
		int	w,
		int	h
	)

Sets the size of tiles for a tiler.

Parameters:

[in,out]	t	The tiler whose tile size will be set.
[in]	w	Width of the tiles.
[in]	h	Height of the tiles.

Warning:: w and h must be greater than zero, otherwise tile size won't be changed.; Tile size is not used!

Since :: 2.3

Eina_Bool eina_tiler_union	(	Eina_Tiler *	dst,
		Eina_Tiler *	src
	)

Gets the union of two tilers.

Parameters:

[in,out]	dst	The first tiler, will store the result.
[in]	src	The second tiler.

Returns:: EINA_TRUE on success, EINA_FALSE otherwise.

This function gets the union of tilers dst and src. The result is stored in dst. It returns EINA_TRUE if it succeeds.

Since (EFL) :: 1.11

Since :: 3.0f(2.3.1)

Basic usage

Grid Slicer

Functions

Typedefs

Typedef Documentation

Function Documentation