Bluetooth API
The following Bluetooth functionalities are provided:
- Discovers nearby Bluetooth devices (Device discovery, including Bluetooth LE devices)
- Gets bonded devices information
- Controls bonding
- Connects to a service on a remote device and exchanges data
- Registers a service (RFCOMM) on a local device, which can be consumed by remote devices to exchange data
- Advertise for remote devices (including Bluetooth LE devices)
- Act as a GATT client (Generic Attribute Profile client)
- Configure the local GATT server (Generic Attribute Profile)
For more information on the Bluetooth features, see Bluetooth Guide.
Since: 2.3.1
Table of Contents
- 1. Type Definitions
- 1.1. BluetoothAddress
- 1.2. BluetoothUUID
- 1.3. BluetoothSocketState
- 1.4. BluetoothLESolicitationUUID
- 1.5. BluetoothAdvertisePacketType
- 1.6. BluetoothAdvertisingState
- 1.7. BluetoothAdvertisingMode
- 1.8. Bytes
- 1.9. BluetoothGATTServiceVariant
- 1.10. BluetoothGATTCharacteristicVariant
- 1.11. BluetoothGATTDescriptorVariant
- 2. Interfaces
- 2.1. BluetoothManagerObject
- 2.2. BluetoothLEServiceData
- 2.3. BluetoothLEManufacturerData
- 2.4. BluetoothLEAdvertiseDataInit
- 2.5. BluetoothLEAdvertiseData
- 2.6. BluetoothManager
- 2.7. BluetoothAdapter
- 2.8. BluetoothLEAdapter
- 2.9. BluetoothGATTService
- 2.10. BluetoothGATTServerServiceInit
- 2.11. BluetoothGATTServerService
- 2.12. BluetoothGATTCharacteristic
- 2.13. BluetoothGATTServerCharacteristicInit
- 2.14. BluetoothGATTServerCharacteristic
- 2.15. BluetoothGATTDescriptor
- 2.16. BluetoothGATTServerDescriptorInit
- 2.17. BluetoothGATTServerDescriptor
- 2.18. BluetoothGATTServer
- 2.19. BluetoothLEScanCallback
- 2.20. BluetoothLEAdvertiseCallback
- 2.21. BluetoothLEConnectChangeCallback
- 2.22. ReadValueSuccessCallback
- 2.23. GATTRequestReply
- 2.24. ReadValueRequestCallback
- 2.25. WriteValueRequestCallback
- 2.26. NotificationCallback
- 2.27. ConnectionMtuCallback
- 2.28. BluetoothDevice
- 2.29. BluetoothLEDevice
- 2.30. BluetoothSocket
- 2.31. BluetoothClass
- 2.32. BluetoothClassDeviceMajor
- 2.33. BluetoothClassDeviceMinor
- 2.34. BluetoothClassDeviceService
- 2.35. BluetoothServiceHandler
- 2.36. BluetoothAdapterChangeCallback
- 2.37. BluetoothDeviceSuccessCallback
- 2.38. BluetoothDeviceArraySuccessCallback
- 2.39. BluetoothDiscoverDevicesSuccessCallback
- 2.40. BluetoothSocketSuccessCallback
- 2.41. BluetoothServiceSuccessCallback
- 3. Related Feature
- 4. Full WebIDL
Summary of Interfaces and Methods
1. Type Definitions
1.1. BluetoothAddress
typedef DOMString BluetoothAddress;
Since: 2.3.1
1.2. BluetoothUUID
typedef DOMString BluetoothUUID;
Since: 2.3.1
According to the Bluetooth Core Specification, UUIDs used to represent Bluetooth objects can take 3 forms:
-
128-bit representation: "XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX", where each 'X' stands for a hexadecimal digit.
For example: "198d3a9c-e21a-4f72-a48b-39a6bad7e583". -
32-bit representation: "D1D2D3D4D5D6D7D8", equivalent to "D1D2D3D4D5D6D7D8-0000-1000-8000-00805F9B34FB", where D1..D8 stand for hexadecimal digits.
For example: "e72ad71b". -
16-bit representation: "D1D2D3D4", equivalent to "0000D1D2D3D4-0000-1000-8000-00805F9B34FB", where D1..D4 stand for hexadecimal digits.
For example: "d182".
Unless stated otherwise, each function taking a UUID as a parameter will accept any of the 3 forms and make appropriate conversions.
Unless stated otherwise, each UUID returned from a function and each UUID attribute of an object may be a 16-bit, 32-bit or 128-bit UUID.
Bluetooth API functions are case-insensitive with regard to UUIDs - lowercase (abcdef) and uppercase (ABCDEF) characters are recognized as valid hexadecimal digits.
Remark: The 128-bit UUID that is the base for UUIDs having 16-bit or 32-bit equivalents is defined available through the API in BluetoothManager::BASE_UUID.
1.3. BluetoothSocketState
enum BluetoothSocketState { "CLOSED", "OPEN" };
Since: 2.3.1
- CLOSED - corresponds to closed bluetooth socket.
- OPEN - corresponds to opened bluetooth socket.
1.4. BluetoothLESolicitationUUID
typedef DOMString BluetoothLESolicitationUUID;
Since: 2.3.1
Remark: BluetoothLESolicitationUUID is an alias for BluetoothUUID. Values of both types can take the same 16-bit, 32-bit or 128-bit forms. Functions taking BluetoothLESolicitationUUID parameters will accept the same UUID formats as those accepting BluetoothUUID values.
1.5. BluetoothAdvertisePacketType
enum BluetoothAdvertisePacketType { "ADVERTISE", "SCAN_RESPONSE" };
Since: 2.3.1
- ADVERTISE - the advertising packet
- SCAN_RESPONSE- the scan response packet
1.6. BluetoothAdvertisingState
enum BluetoothAdvertisingState { "STARTED", "STOPPED" };
Since: 2.3.1
- STARTED - advertising has started
- STOPPED - advertising has stopped
1.7. BluetoothAdvertisingMode
enum BluetoothAdvertisingMode { "BALANCED", "LOW_LATENCY", "LOW_ENERGY" };
Since: 2.3.1
- BALANCED- Balanced advertising mode
- LOW_LATENCY- Low latency advertising mode
- LOW_ENERGY - Low energy advertising mode
1.8. Bytes
typedef (byte[] or DOMString or Uint8Array) Bytes;
Since: 2.3.1
1.9. BluetoothGATTServiceVariant
typedef (BluetoothGATTService or BluetoothGATTServerService) BluetoothGATTServiceVariant;
Since: 6.0
1.10. BluetoothGATTCharacteristicVariant
typedef (BluetoothGATTCharacteristic or BluetoothGATTServerCharacteristic) BluetoothGATTCharacteristicVariant;
Since: 6.0
1.11. BluetoothGATTDescriptorVariant
typedef (BluetoothGATTDescriptor or BluetoothGATTServerDescriptor) BluetoothGATTDescriptorVariant;
Since: 6.0
2. Interfaces
2.1. BluetoothManagerObject
[NoInterfaceObject] interface BluetoothManagerObject { readonly attribute BluetoothManager bluetooth; };
Tizen implements BluetoothManagerObject;
Since: 2.3.1
The tizen.bluetooth object allows access to the Bluetooth API.
Attributes
-
readonly
BluetoothManager bluetoothObject representing a bluetooth manager.
Since: 2.3.1
2.2. BluetoothLEServiceData
[Constructor(DOMString uuid, Bytes data)] interface BluetoothLEServiceData { attribute BluetoothUUID uuid; attribute DOMString data; };
Since: 2.3.1
Constructors
Attributes
-
BluetoothUUID uuidThe UUID of service data.
Since: 2.3.1
Code example:
/* Creates a serviceData. */ var service = new tizen.BluetoothLEServiceData("11e5", "0x1811"); service.uuid = "f23641a4";
-
DOMString dataThe service data of the Bluetooth LE device.
Since: 2.3.1
Code example:
/* Creates a serviceData. */ var service = new tizen.BluetoothLEServiceData("11e5", "0x1811"); service.data = "0x1815";
2.3. BluetoothLEManufacturerData
[Constructor(DOMString id, Bytes data)] interface BluetoothLEManufacturerData { attribute DOMString id; attribute DOMString data; };
Since: 2.3.1
Constructors
Attributes
-
DOMString idThe manufacturer assigned ID
Since: 2.3.1
Code example:
/* Creates a manufacturerData. */ var manufacturer = new tizen.BluetoothLEManufacturerData("127", "0x0057"); manufacturer.id = "129";
-
DOMString dataThe manufacturer data content
The string should consist of hexadecimal characters only (A-F, a-f, 0-9). If the string's length is odd, the last character will be omitted. The string may start without or with one of below prefixes:
- "0x",
- "0X".
See also, usage of BluetoothLEManufacturerData.
Since: 2.3.1
Code example:
/* Creates a manufacturerData. */ var manufacturer = new tizen.BluetoothLEManufacturerData("127", "0x0057"); manufacturer.data = "0x0059";
2.4. BluetoothLEAdvertiseDataInit
dictionary BluetoothLEAdvertiseDataInit { boolean? includeName; BluetoothUUID[]? uuids; BluetoothLESolicitationUUID[]? solicitationuuids; unsigned long? appearance; boolean? includeTxPowerLevel; BluetoothLEServiceData[]? servicesData; BluetoothLEManufacturerData? manufacturerData; };
Since: 2.3.1
This dictionary is used as an input parameter of the BluetoothLEAdvertiseData constructor.
Code example:
var advertData = { includeName: false, uuids: ["41a4"], solicitationuuids: ["58574d3f"], appearance: 192, includeTxPowerLevel: false };
2.5. BluetoothLEAdvertiseData
[Constructor(optional BluetoothLEAdvertiseDataInit? init)] interface BluetoothLEAdvertiseData { attribute boolean? includeName; attribute BluetoothUUID[]? uuids; attribute BluetoothLESolicitationUUID[]? solicitationuuids; attribute unsigned long? appearance; attribute boolean? includeTxPowerLevel; attribute BluetoothLEServiceData[]? servicesData; attribute BluetoothLEServiceData? serviceData; attribute BluetoothLEManufacturerData? manufacturerData; };
Since: 2.3.1
The BluetoothLEAdvertiseData container for Bluetooth LE advertising. This represents the data to be advertised as well as the scan response data for active scans.
Code example:
var advertData = { includeName: false, uuids: ["41a4"], solicitationuuids: ["58574d3f"], appearance: 192, includeTxPowerLevel: false }; var advertise = new tizen.BluetoothLEAdvertiseData(advertData);
Constructors
-
Constructor (BluetoothLEAdvertiseDataInit?)
BluetoothLEAdvertiseData(optional BluetoothLEAdvertiseDataInit? init);
Attributes
-
boolean includeName [nullable]The flag indicating whether the device name should be included in advertise or scan response data. If attribute is set to null, The default value is set to a false.
Since: 2.3.1
Code example:
var advertise = new tizen.BluetoothLEAdvertiseData(); advertise.includeName = true;
-
BluetoothUUID[]
uuids [nullable]The service UUIDs for advertise or scan response data.
UUIDs may be advertised in another formats than passed in uuids. The following conversions are applied:
- 16-bit values are advertised as 16-bit UUIDs
- 128-bit values, that have 16-bit equivalent UUIDs described in BluetoothUUID, are advertised as 16-bit UUIDs
- in any other case, UUIDs are advertised in 128-bit format
Since: 2.3.1
Code example:
var advertise = new tizen.BluetoothLEAdvertiseData(); advertise.uuids = ["180d", "7cae86d2-a021-11ea-bb37-0242ac130002"];
-
BluetoothLESolicitationUUID[]
solicitationuuids [nullable]The service solicitation UUIDs for advertise or scan response data.
UUIDs may be advertised in another formats than passed in solicitationuuids. The following conversions are applied:
- 16-bit values are advertised as 16-bit UUIDs
- 128-bit values, that have 16-bit equivalent UUIDs described in BluetoothUUID, are advertised as 16-bit UUIDs
- in any other case, UUIDs are advertised in 128-bit format
Since: 2.3.1
Code example:
var advertise = new tizen.BluetoothLEAdvertiseData(); advertise.solicitationuuids = ["180f", "7cae86d2-a021-11ea-bb37-0242ac130002"];
-
unsigned long appearance [nullable]The external appearance of this device for advertise or scan response data.
See the list of appearance codes for sample values.
Since: 2.3.1
Code example:
var advertise = new tizen.BluetoothLEAdvertiseData(); advertise.appearance = 192;
-
boolean includeTxPowerLevel [nullable]The transmission power level should be included in advertise or scan response data. If attribute is set to null, The default value is set to a false.
Since: 2.3.1
Code example:
var advertise = new tizen.BluetoothLEAdvertiseData(); advertise.includeTxPowerLevel = true;
-
BluetoothLEServiceData[]
servicesData [nullable]The array of objects representing service data for advertise.
Since: 6.0
Remark: Only 16-bit BluetoothLEServiceData::uuid values can be advertised. Duplicated uuid values in servicesData are not allowed for advertising.
Remark: If this attribute is in neither null nor undefined, the value of deprecated BluetoothLEAdvertiseData::serviceData attribute is ignored.
Code example:
var advertise = new tizen.BluetoothLEAdvertiseData(); var firstService = new tizen.BluetoothLEServiceData("11e5", "0x1811"); var secondService = new tizen.BluetoothLEServiceData("a5e8", "0x1815"); advertise.servicesData = [firstService, secondService];
-
BluetoothLEServiceData serviceData [nullable]The service data for advertise or scan response data.
Deprecated. Deprecated since 6.0. Instead, use BluetoothLEAdvertiseData::servicesData.
Since: 2.3.1
Code example:
var advertise = new tizen.BluetoothLEAdvertiseData(); var service = new tizen.BluetoothLEServiceData("11e5", "0x1811"); advertise.serviceData = service;
-
BluetoothLEManufacturerData manufacturerData [nullable]The manufacturer specific data for advertise or scan response data.
Since: 2.3.1
Code example:
var advertise = new tizen.BluetoothLEAdvertiseData(); var manufacturer = new tizen.BluetoothLEManufacturerData("127", "0x0057"); advertise.manufacturerData = manufacturer;
2.6. BluetoothManager
[NoInterfaceObject] interface BluetoothManager { const DOMString BASE_UUID = "00000000-0000-1000-8000-00805F9B34FB"; readonly attribute BluetoothClassDeviceMajor deviceMajor; readonly attribute BluetoothClassDeviceMinor deviceMinor; readonly attribute BluetoothClassDeviceService deviceService; BluetoothAdapter getDefaultAdapter() raises(WebAPIException); BluetoothLEAdapter getLEAdapter() raises(WebAPIException); BluetoothGATTServer getGATTServer() raises(WebAPIException); byte[] toByteArray(Bytes data) raises(WebAPIException); DOMString toDOMString(Bytes data) raises(WebAPIException); Uint8Array toUint8Array(Bytes data) raises(WebAPIException); BluetoothUUID uuidTo128bit(BluetoothUUID uuid) raises(WebAPIException); BluetoothUUID uuidToShortestPossible(BluetoothUUID uuid) raises(WebAPIException); boolean uuidsEqual(BluetoothUUID uuid1, BluetoothUUID uuid2) raises(WebAPIException); };
Since: 2.3.1
Attributes
-
readonly
BluetoothClassDeviceMajor deviceMajorThe major device class identifier of Bluetooth class of device (CoD).
Since: 2.3.1
Code example:
console.log(tizen.bluetooth.deviceMajor);
-
readonly
BluetoothClassDeviceMinor deviceMinorThe minor device class identifier of Bluetooth class of device (CoD).
Since: 2.3.1
Code example:
console.log(tizen.bluetooth.deviceMinor);
-
readonly
BluetoothClassDeviceService deviceServiceThe major service class identifier of Bluetooth class of device (CoD).
Since: 2.3.1
Code example:
console.log(tizen.bluetooth.deviceService);
Methods
-
getDefaultAdapter
-
Gets the default local Bluetooth adapter.
BluetoothAdapter getDefaultAdapter();
Since: 2.3.1
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Return value:
-
BluetoothAdapter:
The local BluetoothAdapter object.
Exceptions:
- WebAPIException
with error type SecurityError, if the application does not have the privilege to call this method.
with error type UnknownError, if any other error occurs.
Code example:
try { var adapter = tizen.bluetooth.getDefaultAdapter(); } catch (err) { console.log(err.name + ": " + err.message); }
- WebAPIException
-
getLEAdapter
-
Gets the default Low Energy Bluetooth adapter.
BluetoothLEAdapter getLEAdapter();
Since: 2.3.1
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: To check if this method is supported or not, use tizen.systeminfo.getCapability("http://tizen.org/feature/network.bluetooth.le").
Return value:
-
BluetoothLEAdapter:
The local BluetoothLEAdapter object.
Exceptions:
- WebAPIException
with error type SecurityError, if the application does not have the privilege to call this method.
with error type NotSupportedError, if the feature is not supported.
with error type UnknownError, if any other error occurs.
Code example:
try { var adapter = tizen.bluetooth.getLEAdapter(); } catch (err) { console.log(err.name + ": " + err.message); }
- WebAPIException
-
getGATTServer
-
Gets the BluetoothGATTServer object, which allows starting, stopping the local GATT server, and configuring its services.
BluetoothGATTServer getGATTServer();
Since: 6.0
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Return value:
-
BluetoothGATTServer:
The BluetoothGATTServer interface to the local GATT server.
Exceptions:
- WebAPIException
with error type SecurityError, if the application does not have the privilege to call this method.
with error type NotSupportedError, if the feature is not supported.
with error type AbortError, if any other error occurs.
Code example:
var server = tizen.bluetooth.getGATTServer();
- WebAPIException
-
toByteArray
-
Converts given data to byte array.
byte[] toByteArray(Bytes data);
Since: 6.0
If given parameter is of type DOMSting the string should consist of hexadecimal characters only (A-F, a-f, 0-9). If the string's length is odd, the last character will be omitted. Only exception is string containing single zero, in which case [0] is returned. The string may start without or with one of below prefixes:
- "0x",
- "0X".
Parameters:
- data: The data can be either a byte[] or a DOMString or an Uint8Array.
Return value:
-
byte[]:
byte array with given data.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type.
Code example:
var dataInt8Array = new Int8Array([-21, 31]); var dataUint8Array = new Uint8Array([240, 129]); var dataString = "0x18b1"; var fromInt8Array = tizen.bluetooth.toByteArray(dataInt8Array); var fromUint8Array = tizen.bluetooth.toByteArray(dataUint8Array); var fromString = tizen.bluetooth.toByteArray(dataString); console.log("converted from Int8Array: " + JSON.stringify(fromInt8Array)); console.log("converted from Uint8Array: " + JSON.stringify(fromUint8Array)); console.log("converted from DOMString: " + JSON.stringify(fromString));
Output example:
converted from Int8Array: [235, 31] converted from Uint8Array: [240, 129] converted from DOMString: [244, 177]
-
toDOMString
-
Converts given data to DOMString.
DOMString toDOMString(Bytes data);
Since: 6.0
Parameters:
- data: The data can be either a byte[] or a DOMString or an Uint8Array.
Return value:
-
DOMString:
DOMString with given data in the form of hexadecimal number preceded by "0x". The return string is always lowercase.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type.
Code example:
var dataInt8Array = new Int8Array([-21, 31]); var dataUint8Array = new Uint8Array([240, 129]); var dataString = "0x18b1"; console.log("converted from Int8Array: " + tizen.bluetooth.toDOMString(dataInt8Array)); console.log("converted from Uint8Array: " + tizen.bluetooth.toDOMString(dataUint8Array)); console.log("converted from DOMString: " + tizen.bluetooth.toDOMString(dataString));
Output example:
converted from Int8Array: 0xeb1f converted from Uint8Array: 0xf081 converted from DOMString: 0x18b1
-
toUint8Array
-
Converts given data to Uint8Array.
Uint8Array toUint8Array(Bytes data);
Since: 6.0
If given parameter is of type DOMSting the string should consist of hexadecimal characters only (A-F, a-f, 0-9). If the string's length is odd, the last character will be omitted. Only exception is string containing single zero, in which case Uint8Array([0]) is returned. The string may start without or with one of below prefixes:
- "0x",
- "0X".
Parameters:
- data: The data can be either a byte[] or a DOMString or an Uint8Array.
Return value:
-
Uint8Array:
byte array with given data.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type.
Code example:
var dataInt8Array = new Int8Array([-21, 31]); var dataUint8Array = new Uint8Array([240, 129]); var dataString = "0x18b1"; var fromInt8Array = tizen.bluetooth.toUint8Array(dataInt8Array); var fromUint8Array = tizen.bluetooth.toUint8Array(dataUint8Array); var fromString = tizen.bluetooth.toUint8Array(dataString); console.log("converted from Int8Array: " + JSON.stringify(fromInt8Array)); console.log("converted from Uint8Array: " + JSON.stringify(fromUint8Array)); console.log("converted from DOMString: " + JSON.stringify(fromString));
Output example:
converted from Int8Array: {"0":235, "1":31} converted from Uint8Array: {"0":240, "1":129} converted from DOMString: {"0":24, "1":177}
-
uuidTo128bit
-
Converts given UUID to 128 bit representation.
BluetoothUUID uuidTo128bit(BluetoothUUID uuid);
Since: 6.0
Parameters:
- uuid: Valid UUID in any representation.
Return value:
-
BluetoothUUID:
128 bit representation of given UUID.
Exceptions:
- WebAPIException
with error type InvalidValuesError, If given parameter is not a valid UUID.
Code example:
var uuidFrom16bits = tizen.bluetooth.uuidTo128bit("1234"); var uuidFrom32bits = tizen.bluetooth.uuidTo128bit("ab5690ef"); var uuidFrom128bits = tizen.bluetooth.uuidTo128bit("abcdef01-2345-6789-abcd-ef0123456789"); console.log(uuidFrom16bits); console.log(uuidFrom32bits); console.log(uuidFrom128bits);
Output example:
00001234-0000-1000-8000-00805f9b34fb ab5690ef-0000-1000-8000-00805f9b34fb abcdef01-2345-6789-abcd-ef0123456789
-
uuidToShortestPossible
-
Converts given UUID to the shortest format, in which it can be expressed.
BluetoothUUID uuidToShortestPossible(BluetoothUUID uuid);
Since: 6.0
This function attempts to return the possible shortest UUID with the following priority: 1. 16 bit 2. 32 bit 3. 128 bit
Parameters:
- uuid: Valid UUID in any representation.
Return value:
-
BluetoothUUID:
UUID in shortest possible representation.
Exceptions:
- WebAPIException
with error type InvalidValuesError, If given parameter is not a valid UUID.
Code example:
tizen.bluetooth.uuidToShortestPossible("1234"); tizen.bluetooth.uuidToShortestPossible("0000acdf"); tizen.bluetooth.uuidToShortestPossible("ab5690ef-0000-1000-8000-00805F9B34FB"); tizen.bluetooth.uuidToShortestPossible("abcdef01-2345-6789-abcd-ef0123456789");
Output example:
1234 acdf ab5690ef abcdef01-2345-6789-abcd-ef0123456789
-
uuidsEqual
-
Checks if given parameters are representations of the same UUID.
boolean uuidsEqual(BluetoothUUID uuid1, BluetoothUUID uuid2);
Since: 6.0
Parameters:
- uuid1: Valid UUID in any representation.
- uuid2: Valid UUID in any representation.
Return value:
-
boolean:
true if uuid1 is a representation of the same UUID as uuid2, false otherwise.
Exceptions:
- WebAPIException
with error type InvalidValuesError, If any of given parameters is not a valid UUID.
Code example:
tizen.bluetooth.uuidsEqual("1234", "00001234"); tizen.bluetooth.uuidsEqual("ab5690ef", "ab5690ef-0000-1000-8000-00805F9B34FB"); tizen.bluetooth.uuidsEqual("abcdef01-2345-6789-abcd-ef0123456789", "abcdef01");
Output example:
true true false
2.7. BluetoothAdapter
[NoInterfaceObject] interface BluetoothAdapter { readonly attribute DOMString name; readonly attribute BluetoothAddress address; readonly attribute boolean powered; readonly attribute boolean visible; void setName(DOMString name, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void setChangeListener(BluetoothAdapterChangeCallback listener) raises(WebAPIException); void unsetChangeListener() raises(WebAPIException); void discoverDevices(BluetoothDiscoverDevicesSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void stopDiscovery(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void getKnownDevices(BluetoothDeviceArraySuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void getDevice(BluetoothAddress address, BluetoothDeviceSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void createBonding(BluetoothAddress address, BluetoothDeviceSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void destroyBonding(BluetoothAddress address, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void registerRFCOMMServiceByUUID(BluetoothUUID uuid, DOMString name, BluetoothServiceSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); };
Since: 2.3.1
This interface offers methods to control local Bluetooth behavior, such as:
- Scanning for remote devices
- Accessing known devices
- Registering a service in the device service database
Attributes
-
readonly
DOMString nameThe readable name of the Bluetooth adapter.
Since: 2.3.1
Code example:
/* Access adapter name. */ var adapter = tizen.bluetooth.getDefaultAdapter(); console.log("Bluetooth adapter name: " + adapter.name);
-
readonly
BluetoothAddress addressThe unique hardware address of the Bluetooth adapter, also known as the MAC address.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); console.log("Bluetooth device address: " + adapter.address);
-
readonly
boolean poweredThe current state of the Bluetooth adapter.
This attribute holds one of the following 2 values:
- true - If Bluetooth adapter is currently on
- false - If Bluetooth adapter is currently off
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); console.log("Bluetooth state: " + (adapter.powered ? "On" : "Off"));
-
readonly
boolean visibleThe current visibility state of the Bluetooth adapter, that is, whether the local device is discoverable by remote devices.
Since: 2.3.1
Code example:
/* Queries the current visible state. */ var adapter = tizen.bluetooth.getDefaultAdapter(); console.log("Bluetooth Visibility: " + (adapter.visible ? "On" : "Off"));
Methods
-
setName
-
Sets the local Bluetooth adapter name.
void setName(DOMString name, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
Sends a request to Bluetooth hardware to change the name of the local Bluetooth adapter to name.
The ErrorCallback is launched with these error types:
- InvalidValuesError: If any of the input parameters contain an invalid value.
- ServiceNotAvailableError: If a Bluetooth device is turned off.
- UnknownError: In any other error case.
- NotSupportedError: If a device doesn't allow a Tizen Web application to change the name of the local Bluetooth adapter.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: To check if this method is supported or not, use tizen.systeminfo.getCapability("http://tizen.org/feature/network.bluetooth")
Parameters:
- name: Name to set.
- successCallback [optional] [nullable]: Callback function that is called when the asynchronous call completes successfully.
- errorCallback [optional] [nullable]: Callback function that is called when an error occurs.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if any of the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); var capability = tizen.systeminfo.getCapability("http://tizen.org/feature/network.bluetooth"); function changeName(newName) { if (adapter.name != newName) { /* Initiate change name. */ adapter.setName(newName, function() { console.log("Adapter name changed to " + adapter.name); }, function(e) { console.log("Failed to change name: " + e.message); }); } } if (capability === true) { changeName("myDevice"); }
-
setChangeListener
-
Sets the listener to receive notifications about changes of Bluetooth adapter.
void setChangeListener(BluetoothAdapterChangeCallback listener);
Since: 2.3.1
Parameters:
- listener: The Bluetooth Adapter event listener to set.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type.
with error type SecurityError, if this functionality is not allowed.
with error type UnknownError, if any other error occurs.
Code example:
var changeListener = { onstatechanged: function(powered) { console.log("Power state is changed into: " + powered); }, onnamechanged: function(name) { console.log("Name is changed to: " + name); }, onvisibilitychanged: function(visible) { console.log("Visibility is changed into: " + visible); } }; var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.setChangeListener(changeListener);
-
unsetChangeListener
-
Unsets the listener, so stop receiving notifications about changes of Bluetooth adapter.
void unsetChangeListener();
Since: 2.3.1
Calling this function has no effect if listener is not set.
Exceptions:
- WebAPIException
with error type SecurityError, if this functionality is not allowed.
with error type UnknownError, if any other error occurs.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); var changeListener = { onstatechanged: function(powered) { console.log("Power state is changed into: " + powered); if (!powered) adapter.unsetChangeListener(); }, onnamechanged: function(name) { console.log("Name is changed to: " + name); }, onvisibilitychanged: function(visible) { console.log("Visibility is changed into: " + visible); } }; adapter.setChangeListener(changeListener);
- WebAPIException
-
discoverDevices
-
Discovers nearby Bluetooth devices if any, that is, devices within proximity to the local device.
void discoverDevices(BluetoothDiscoverDevicesSuccessCallback successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
This method initiates the device discovery process. Depending on the progress of this process the following methods are invoked:
- BluetoothDiscoverDevicesSuccessCallback.onstarted() - when a discovery process starts successfully.
- BluetoothDiscoverDevicesSuccessCallback.ondevicefound() - when any device is found in the process and this method is invoked with the device information. If no device is found, this method will never be invoked.
- BluetoothDiscoverDevicesSuccessCallback.ondevicedisappeared() - when a device goes out of proximity and this method is invoked with the address of the device.
- BluetoothDiscoverDevicesSuccessCallback.onfinished() - when a discovery process is completed.
A discovery process can be canceled anytime, by calling stopDiscovery() on the BluetoothAdapter.
The ErrorCallback is launched with these error types:
- ServiceNotAvailableError - If a Bluetooth device is turned off
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- successCallback: Callback function that is called when an asynchronous call completes successfully.
- errorCallback [optional] [nullable]: Callback function that is called when an error occurs.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if any of the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); /* Purpose of code below is to enable Bluetooth on the device. */ var bluetoothSwitchAppControl = new tizen.ApplicationControl( "http://tizen.org/appcontrol/operation/edit", null, "application/x-bluetooth-on-off"); function launchSuccess() { console.log("Bluetooth Settings application is successfully launched"); } function launchError(error) { alert("An error occurred: " + error.name + ". Please enable Bluetooth through the Settings application"); } var serviceReply = { /* Called when the launched application reports success. */ onsuccess: function(data) { if (adapter.powered) { console.log("Bluetooth is successfully turned on"); startDiscovery(); } else { console.log("Bluetooth is still switched off"); } }, /* Called when launched application reports failure. */ onfailure: function() { alert("Bluetooth Settings application reported failure"); } }; /* Discovery sample code. */ function startDiscovery() { var discoverDevicesSuccessCallback = { onstarted: function() { console.log("Device discovery started"); }, ondevicefound: function(device) { console.log("Found device - name: " + device.name + ", Address: " + device.address); }, ondevicedisappeared: function(address) { console.log("Device disappeared: " + address); }, onfinished: function(devices) { console.log("Found Devices"); for (var i = 0; i < devices.length; i++) { console.log("Name: " + devices[i].name + ", Address: " + devices[i].address); } console.log("Total: " + devices.length); } }; /* Starts searching for nearby devices, for about 12 sec. */ adapter.discoverDevices(discoverDevicesSuccessCallback, function(e) { console.log("Failed to search devices: " + e.message + "(" + e.name + ")"); }); } /* Execution. */ if (adapter.powered) { console.log("Bluetooth is already enabled"); startDiscovery(); } else { console.log("Try to launch the Bluetooth Settings application"); tizen.application.launchAppControl( bluetoothSwitchAppControl, null, launchSuccess, launchError, serviceReply); }
-
stopDiscovery
-
Stops an active device discovery session.
void stopDiscovery(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
Device discovery is a heavyweight procedure, hence we recommend stopping discovery as soon as the required device is found. This method cancels an active discovery session.
The ErrorCallback is launched with these error types:
- ServiceNotAvailableError - If a Bluetooth device is turned off
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- successCallback [optional] [nullable]: Callback function to invoke when an asynchronous call completes successfully.
- errorCallback [optional] [nullable]: Callback function to invoke when an error occurs.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if any of the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); /* Purpose of code below is to enable Bluetooth on the device. */ var bluetoothSwitchAppControl = new tizen.ApplicationControl( "http://tizen.org/appcontrol/operation/edit", null, "application/x-bluetooth-on-off"); function launchSuccess() { console.log("Bluetooth Settings application is successfully launched"); } function launchError(error) { alert("An error occurred: " + error.name + ". Please enable Bluetooth through the Settings application"); } var serviceReply = { /* Called when the launched application reports success. */ onsuccess: function(data) { if (adapter.powered) { console.log("Bluetooth is successfully turned on"); startDiscovery(); } else { console.log("Bluetooth is still switched off"); } }, /* Called when launched application reports failure. */ onfailure: function() { alert("Bluetooth Settings application reported failure"); } }; /* Discovery sample code. */ /* Calls this method whenever user finds one of the devices. */ function cancelDiscovery() { adapter.stopDiscovery( function() { console.log("Stop discovery success"); }, function(e) { console.log("Error while stopDiscovery:" + e.message); }); } function startDiscovery() { var discoverDevicesSuccessCallback = { onstarted: function() { console.log("Device discovery started"); }, ondevicefound: function(device) { console.log("Found device - name: " + device.name + ", Address: " + device.address); /* Shows the device to user to check if this is the device user is looking for. */ /* For example, add this to list view. */ cancelDiscovery(); }, ondevicedisappeared: function(address) { console.log("Device disappeared: " + address); /* Removes from list, as it is no longer valid. */ }, onfinished: function(devices) { console.log("Found Devices"); for (var i = 0; i < devices.length; i++) { console.log("Name: " + devices[i].name + ", Address: " + devices[i].address); } console.log("Total: " + devices.length); } }; /* Starts searching for nearby devices, for about 12 sec. */ adapter.discoverDevices(discoverDevicesSuccessCallback, function(e) { console.log("Failed to search devices: " + e.message + "(" + e.name + ")"); }); } /* Execution. */ if (adapter.powered) { console.log("Bluetooth is already enabled"); startDiscovery(); } else { console.log("Try to launch the Bluetooth Settings application"); tizen.application.launchAppControl( bluetoothSwitchAppControl, null, launchSuccess, launchError, serviceReply); }
-
getKnownDevices
-
Gets all the known devices that have information stored in the local Bluetooth adapter.
void getKnownDevices(BluetoothDeviceArraySuccessCallback successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
A known device is one of the following:
- a bonded device
- a device found in last inquiry process
On success, it returns the list of currently known devices through BluetoothDeviceArraySuccessCallback.
The ErrorCallback is launched with these error types:
- ServiceNotAvailableError - If a Bluetooth device is turned off
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- successCallback: Callback function to invoke at retrieval of a list of Bluetooth devices that were bonded (paired) to the local Bluetooth adapter.
- errorCallback [optional] [nullable]: Callback function to invoke in case of failure in finding bonded devices.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); /* Purpose of code below is to enable Bluetooth on the device. */ var bluetoothSwitchAppControl = new tizen.ApplicationControl( "http://tizen.org/appcontrol/operation/edit", null, "application/x-bluetooth-on-off"); function launchSuccess() { console.log("Bluetooth Settings application is successfully launched"); } function launchError(error) { alert("An error occurred: " + error.name + ". Please enable Bluetooth through the Settings application"); } var serviceReply = { /* Called when the launched application reports success. */ onsuccess: function(data) { if (adapter.powered) { console.log("Bluetooth is successfully turned on"); adapter.getKnownDevices(onGotDevices, onError); } else { console.log("Bluetooth is still switched off"); } }, /* Called when launched application reports failure. */ onfailure: function() { alert("Bluetooth Settings application reported failure"); } }; /* getKnownDevices sample code. */ function onGotDevices(devices) { console.log("Devices"); for (var i = 0; i < devices.length; i++) { console.log(" Name: " + devices[i].name + ", Address: " + devices[i].address); } console.log("Total: " + devices.length); } function onError(e) { console.log("Error: " + e.message); } /* Execution. */ if (adapter.powered) { console.log("Bluetooth is already enabled"); adapter.getKnownDevices(onGotDevices, onError); } else { console.log("Try to launch the Bluetooth Settings application"); tizen.application.launchAppControl( bluetoothSwitchAppControl, null, launchSuccess, launchError, serviceReply); }
-
getDevice
-
Gets the BluetoothDevice object for a given device hardware address.
void getDevice(BluetoothAddress address, BluetoothDeviceSuccessCallback successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
This method returns device information stored in the local Bluetooth adapter for the specified device address through BluetoothDeviceSuccessCallback. A valid hardware address must be passed, such as "35:F4:59:D1:7A:03".
The ErrorCallback is launched with these error types:
- NotFoundError - If there is no device with the given address
- ServiceNotAvailableError - If a Bluetooth device is turned off
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- address: Address of a remote Bluetooth device to get.
- successCallback: Callback function that is called when an asynchronous call completes successfully.
- errorCallback [optional] [nullable]: Callback function that is called when an error occurs.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
function gotDeviceInfo(device) { console.log("Device Name: " + device.name); console.log("Device Address: " + device.address); console.log("Device Class: " + device.deviceClass.major); console.log("Is Bonded: " + (device.isBonded ? "Yes" : "No")); } function onError(e) { console.log("Could not get device info:" + e.message); } var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.getDevice("35:F4:59:D1:7A:03", gotDeviceInfo, onError);
-
createBonding
-
Creates a bond with a remote device by initiating the bonding process with peer device, using the given MAC address. The remote device must be bonded with the local device in order to connect to services of the remote device and then exchange data with each other.
void createBonding(BluetoothAddress address, BluetoothDeviceSuccessCallback successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
If the bonding process is successful, the device information is sent in successCallback.
The ErrorCallback is launched with these error types:
- NotFoundError - If there is no device with the given address
- ServiceNotAvailableError - If a Bluetooth device is turned off
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- address: MAC address of remote Bluetooth address to bond with.
- successCallback: Callback function that is called when an asynchronous call completes successfully.
- errorCallback [optional] [nullable]: Callback function that is called when an error occurs.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
function onBondingSuccess(device) { console.log("Device Name:" + device.name); console.log("Device Address:" + device.address); console.log("Device Service UUIDs:" + device.uuids.join("\n")); } function onError(e) { console.log("Could not create bonding, reason:" + e.message); } var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.createBonding("35:F4:59:D1:7A:03", onBondingSuccess, onError);
-
destroyBonding
-
Destroys the bond with a remote device.
void destroyBonding(BluetoothAddress address, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
This method initiates the process of removing the specified address from the list of bonded devices.
The ErrorCallback is launched with these error types:
- NotFoundError - If there is no device with the given address
- ServiceNotAvailableError - If a Bluetooth device is turned off
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- address: Address of a bonded device.
- successCallback [optional] [nullable]: Callback function that is called when an asynchronous call completes successfully.
- errorCallback [optional] [nullable]: Callback function that is called when an error occurs.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); function gotDevice(device) { if (device.isBonded) { /* Initiates destroying bonding. */ adapter.destroyBonding(device.address, function() { console.log("Succeeded to destroy the bond success with:" + device.address); }, function(e) { console.log( "Failed to destroy the bond with " + device.address + ", reason: " + e.message); }); } } var deviceAddress = "35:F4:59:D1:7A:03"; adapter.getDevice(deviceAddress, gotDevice, function(e) { console.log("Failed to get device info for " + deviceAddress + ", reason: " + e.message); });
-
registerRFCOMMServiceByUUID
-
Registers a service record in the device service record database with the specified uuid, name.
void registerRFCOMMServiceByUUID(BluetoothUUID uuid, DOMString name, BluetoothServiceSuccessCallback successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
On success of the service registration, it returns a BluetoothServiceHandler object as the first parameter of successCallback, and listens for client connections. The service handler can be used to be notified on client connections or to unregister the service. User interaction is mandatory to connect to a registered service.
If any client(remote device) connects to this service, then BluetoothServiceHandler.onconnect() is invoked with BluetoothSocket object.
BluetoothServiceHandler.unregister() can be used to unregister the service record from the device service database and stop listening for client connections.
The ErrorCallback is launched with these error types:
- InvalidValuesError - If any of the input parameters contain an invalid value
- ServiceNotAvailableError - If a Bluetooth device is turned off
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- uuid: UUID of the new service, to which clients connect. Only 128-bit UUIDs are supported. 16-bit and 32-bit UUIDs have to be converted to 128-bit equivalents before being passed to this function.
- name: Name of a service.
- successCallback: Callback function that is called on successful service registration.
- errorCallback [optional] [nullable]: Callback function that is called when an error occurs.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); /* Holds currently registered service record. */ var chatServiceHandler = null; /* Holds currently open socket. */ var serviceSocket = null; function chatServiceSuccessCb(recordHandler) { console.log("Chat service registration succeeds!"); chatServiceHandler = recordHandler; recordHandler.onconnect = function(socket) { console.log("Client connected: " + socket.peer.name + "," + socket.peer.address); serviceSocket = socket; /* Messages received from remote device. */ socket.onmessage = function() { var data = socket.readData(); /* Handles message code goes here. */ }; socket.onclose = function() { console.log("The socket is closed"); serviceSocket = null; }; }; } function publishChatService() { /* Only RFCOMM services with 128-bit UUIDs can be registered */ var CHAT_SERVICE_UUID = "5BCE9431-6C75-32AB-AFE0-2EC108A30860"; adapter.registerRFCOMMServiceByUUID(CHAT_SERVICE_UUID, "Chat service", chatServiceSuccessCb, /* Error handler. */ function(e) { console.log("Could not register service record, Error: " + e.message); }); } function unregisterChatService() { if (chatServiceHandler != null) { chatServiceHandler.unregister( function() { console.log("Chat service is unregistered"); chatServiceHandler = null; }, function(e) { console.log("Failed to unregister service: " + e.message); }); } }
2.8. BluetoothLEAdapter
[NoInterfaceObject] interface BluetoothLEAdapter { void startScan(BluetoothLEScanCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void stopScan() raises(WebAPIException); boolean isScanning() raises(WebAPIException); void startAdvertise(BluetoothLEAdvertiseData advertiseData, BluetoothAdvertisePacketType packetType, BluetoothLEAdvertiseCallback successCallback, optional ErrorCallback? errorCallback, optional BluetoothAdvertisingMode? mode, optional boolean? connectable) raises(WebAPIException); void stopAdvertise() raises(WebAPIException); long addConnectStateChangeListener(BluetoothLEConnectChangeCallback listener) raises(WebAPIException); void removeConnectStateChangeListener(long watchID); };
Since: 2.3.1
This interface offers methods to control local Bluetooth Low Energy behavior, such as:
- Scanning and Advertising for remote devices
Methods
-
startScan
-
Starts scanning for Low Energy advertisement.
void startScan(BluetoothLEScanCallback successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
There is no time limit for the bluetooth Low Energy scanning process. It can be canceled only by calling the stopScan() method in the BluetoothLEAdapter interface.
The ErrorCallback will be launched in the following situations:
- ServiceNotAvailableError - If a Bluetooth device is turned off
- UnknownError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- successCallback: Called when advertisement is found.
- errorCallback [optional] [nullable]: The method to invoke when an error occurs.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if any input attribute is not compatible with the expected type for this attribute.
with error type InvalidStateError, if device is currently in progress of scanning, if the local Bluetooth le adapter is currently not enabled.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { console.log("[Found device] address: " + device.address); });
-
stopScan
-
Stops scanning for Low Energy advertisement.
void stopScan();
Since: 2.3.1
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Exceptions:
- WebAPIException
with error type SecurityError, if the application does not have the privilege to call this method.
with error type UnknownError, if any other error occurs
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); adapter.stopScan(); } });
- WebAPIException
-
isScanning
-
Checks if scanning for Bluetooth Low Energy devices is currently in progress.
boolean isScanning();
Since: 6.0
Return value:
-
boolean:
true, if the Bluetooth Low Energy Adapter has a scan in progress, false otherwise.
Exceptions:
- WebAPIException
with error type NotSupportedError, if the device does not support this functionality.
with error type UnknownError, if any other error occurs.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); var scanningStarted = adapter.isScanning(); console.log("Scanning status: " + scanningStarted); if (!scanningStarted) { adapter.startScan(function onsuccess(device) { console.log("Scanning status: " + adapter.isScanning()); adapter.stopScan(); }); }
Output example:
Scanning status: false Scanning status: true
- WebAPIException
-
startAdvertise
-
Starts advertising for Low Energy Devices.
void startAdvertise(BluetoothLEAdvertiseData advertiseData, BluetoothAdvertisePacketType packetType, BluetoothLEAdvertiseCallback successCallback, optional ErrorCallback? errorCallback, optional BluetoothAdvertisingMode? mode, optional boolean? connectable);
Since: 2.3.1
A advertising process can be canceled anytime, by calling stopAdvertise() on the BluetoothLEAdapter.
The ErrorCallback will be launched in the following situations:
- ServiceNotAvailableError - If a Bluetooth device is turned off
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: Values of service UUIDs and solicitation UUIDs may be converted to one of equivalent formats defined in BluetoothUUID before advertising. Consult the documentation of these fields for more information.
Remark: Consult the documentation of BluetoothLEAdvertiseData::serviceData for the information about the UUID format of service data that can be advertised.
Parameters:
- advertiseData: BluetoothLEAdvertiseData object to be added.
- packetType: The bluetooth LE packet type.
- successCallback: Callback function that is called when advertise is started successfully.
- errorCallback [optional] [nullable]: The method to invoke when an error occurs.
- mode [optional] [nullable]: The power and latency mode of advertising. The default mode is "BALANCED".
- connectable [optional] [nullable]: The connectable status. It's true if the advertisement will be connectable. The default value of the parameter is true.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if any input attribute is not compatible with the expected type for this attribute.
with error type QuotaExceededError, if any input attribute is not compatible with the maximum data size for this attribute.
with error type InvalidValuesError, if advertising services data contains duplicated UUIDs.
with error type InvalidStateError, if device is currently in progress of advertising, if the local Bluetooth le adapter is currently not enabled.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); /* 16-bit, 32-bit and 128-bit service UUIDs are supported (e.g. 180d, 281eb931, */ /* 7cae86d2-a021-11ea-bb37-0242ac130002). */ var battery_svc_uuid_16 = "180f"; /* 16-bit, 32-bit and 128-bit service solicitation UUIDs are supported(e.g. 180d, 281eb931, */ /* 7cae86d2-a021-11ea-bb37-0242ac130002). */ var heart_rate_svc_uuid_16 = "180d"; var advertiseOptions = { includeName: true, /* Whether the device name should be included. */ includeTxPowerLevel: true, /* Whether the transmission power level should be included. */ appearance: 192, /* External appearance of device, 192 - Generic Watch. */ uuids: [battery_svc_uuid_16], solicitationuuids: [heart_rate_svc_uuid_16] }; var advertiseData = new tizen.BluetoothLEAdvertiseData(advertiseOptions); var connectable = true; adapter.startAdvertise(advertiseData, "ADVERTISE", function onstate(state) { console.log("Advertiser state: " + state); }, function(e) { console.log("Failed to startAdvertise: " + e.message); }, "LOW_LATENCY", connectable);
-
stopAdvertise
-
Stops advertising for Low Energy Devices.
void stopAdvertise();
Since: 2.3.1
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Exceptions:
- WebAPIException
with error type SecurityError, if the application does not have the privilege to call this method.
with error type UnknownError, if any other error occurs
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); /* 16-bit, 32-bit and 128-bit service UUIDs are supported (e.g. 180d, 281eb931, */ /* 7cae86d2-a021-11ea-bb37-0242ac130002). */ var battery_svc_uuid_16 = "180f"; /* 16-bit, 32-bit and 128-bit service solicitation UUIDs are supported (e.g. 180d, 281eb931, */ /* 7cae86d2-a021-11ea-bb37-0242ac130002). */ var heart_rate_svc_uuid_16 = "180d"; var advertiseOptions = { includeName: true, /* Whether the device name should be included. */ includeTxPowerLevel: true, /* Whether the transmission power level should be included. */ appearance: 192, /* External appearance of device, 192 - Generic Watch. */ uuids: [battery_svc_uuid_16], solicitationuuids: [heart_rate_svc_uuid_16] }; var advertiseData = new tizen.BluetoothLEAdvertiseData(advertiseOptions); adapter.startAdvertise(advertiseData, "ADVERTISE", function onstate(state) { console.log("Advertiser state: " + state); }); adapter.stopAdvertise();
- WebAPIException
-
addConnectStateChangeListener
-
Registers a listener that is called whenever a GATT connection with another device is established or terminated.
long addConnectStateChangeListener(BluetoothLEConnectChangeCallback listener);
Since: 6.0
The BluetoothLEConnectChangeCallback, registered with this function, is called in the following cases:
- When the connection between a remote client and a local GATT server is established or terminated.
- When the connection between a local client and a remote GATT server is established or terminated.
Parameters:
- listener: A listener function called when the connection state changes.
Return value:
-
long:
The watchID to be used to unregister the listener.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
Code example:
/* This application is running the local GATT Server and does not connect to remote GATT servers. */ /* To be able to notify connected clients about characteristic values' changes, it saves their data. */ var connectedClients = []; function onConnected(device) { console.log("A client connected: " + device.address); connectedClients.push(device); } function onDisconnected(device) { console.log("A client disconnected: " + device.address); connectedClients = connectedClients.filter(function(connectedClient) { return connectedClient.address !== device.address; }); } tizen.bluetooth.getLEAdapter().addConnectStateChangeListener( {onconnected: onConnected, ondisconnected: onDisconnected});
Output example:
A client connected: 6A:33:B1:17:D4:81 A client connected: 4B:1F:DD:35:41:19 A client connected: CC:D4:11:E5:72:4B A client disconnected: 6A:33:B1:17:D4:81
-
removeConnectStateChangeListener
-
Unregisters a listener called whenever a GATT connection with another device is established or terminated.
void removeConnectStateChangeListener(long watchID);
Since: 6.0
This function unregisters a BluetoothLEConnectChangeCallback registered with BluetoothLEAdapter.addConnectStateChangeListener() method.
Parameters:
- watchID: The watchID identifier returned by BluetoothGATTServer.addConnectStateChangeListener() method.
Code example:
/* This application is running the local GATT Server and does not connect to remote GATT servers. */ function onConnected(device) { console.log("A client connected: " + device.address); } function onDisconnected(device) { console.log("A client disconnected: " + device.address); } /* Save watchId to be able to remove the listener later */ var watchId = tizen.bluetooth.getLEAdapter().addConnectStateChangeListener( {onconnected: onConnected, ondisconnected: onDisconnected}); /* A little later, the listener is no longer needed, and can be removed with */ /* removeConnectStateChangeListener(watchId) method */
Output example:
A client connected: 6A:33:B1:17:D4:81 A client connected: 4B:1F:DD:35:41:19 A client connected: CC:D4:11:E5:72:4B A client disconnected: 6A:33:B1:17:D4:81
2.9. BluetoothGATTService
[NoInterfaceObject] interface BluetoothGATTService { readonly attribute BluetoothUUID uuid; readonly attribute BluetoothUUID? serviceUuid; readonly attribute BluetoothGATTServiceVariant[] services; readonly attribute BluetoothGATTCharacteristicVariant[] characteristics; };
Since: 2.3.1
Code example:
function onconnected(device) { console.log("Connected to device"); var service = device.getService(device.uuids[0]); console.log("Service got"); } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { console.log("[Found device] address: " + device.address); device.connect(onconnected.bind(null, device), onerror); });
Attributes
-
readonly
BluetoothUUID uuidUUID of the service.
Deprecated. Deprecated since 6.0. Instead, use BluetoothGATTService::serviceUuid.
Since: 2.3.1
Remark: uuid is set to "0xFFFF", if the value cannot be retrieved.
Code example:
var service = device.getService(device.uuids[0]); console.log("Service UUID " + service.uuid);
-
readonly
BluetoothUUID serviceUuid [nullable]UUID of the service.
Since: 6.0
Remark: serviceUuid is set to null, if the value cannot be retrieved.
Code example:
var service = device.getService(device.uuids[0]); if (service.serviceUuid === null) { console.error("Could not read service UUID"); } else { console.log("Service UUID " + service.serviceUuid); }
-
readonly
BluetoothGATTServiceVariant[]
servicesA list of services included in this service.
Since: 2.3.1
Remark: It can be either type BluetoothGATTService for services retrieved from remote GATT servers or type BluetoothGATTServerService for services retrieved from the local GATT server.
Code example:
var service = device.getService(device.uuids[0]); for (var i = 0; i < service.services.length; ++i) { console.log("Subservices UUID " + service.services[i].uuid); }
-
readonly
BluetoothGATTCharacteristicVariant[]
characteristicsA list of characteristics in this service.
Since: 2.3.1
Remark: It can be either type BluetoothGATTCha racteristic for characteristics retrieved from services of remote GATT servers or type BluetoothGATTServerCharacteristic for characteristics retrieved from services of local GATT server.
Code example:
var service = device.getService(device.uuids[0]); for (var i = 0; i < service.characteristics.length; ++i) { console.log("Subservices UUID " + service.characteristics[i].isWritable); }
2.10. BluetoothGATTServerServiceInit
dictionary BluetoothGATTServerServiceInit { BluetoothUUID serviceUuid; boolean isPrimary = true; BluetoothGATTServerServiceInit[]? includedServices = null; BluetoothGATTServerCharacteristicInit[]? characteristics = null; };
Since: 6.0
This dictionary defines the GATT services to be registered to the local GATT server.
Code example:
/* serviceA and serviceB are objects of type BluetoothGATTServerServiceInit. */ /* hrmCharacteristic is a BluetoothGATTServerCharacteristicInit object. */ var serviceParameters = { serviceUuid: "4b102e75", isPrimary: true, includedServices: [serviceA, serviceB], characteristics: [hrmCharacteristic] };
2.11. BluetoothGATTServerService
[NoInterfaceObject] interface BluetoothGATTServerService : BluetoothGATTService { readonly attribute boolean isPrimary; void unregister(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); };
Since: 6.0
Attributes
-
readonly
boolean isPrimaryFlag indicating whether the service is primary or secondary.
Since: 6.0
Methods
-
unregister
-
Unregisters the service and all its characteristics from the local GATT server.
void unregister(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 6.0
The ErrorCallback is launched with these error types:
- InvalidStateError - If the service cannot be unregistered in the current state of the GATT server.
- AbortError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: GATT services included in other GATT services cannot be unregistered.
Remark: If this method is called for the only GATT service, currently registered in the local running GATT server, the server stops running.
Parameters:
- successCallback [optional] [nullable]: Callback function that is called when the service is successfully unregistered from the local GATT server.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type AbortError, if any other error occurs.
Code example:
/* The service has been registered in the GATT server for a while. Now it is no longer needed. */ function onsuccess() { console.log("Service unregistered"); } function onerror(error) { console.log("Failed to unregister service: " + error.message); } tizen.bluetooth.getGATTServer().services[0].unregister(onsuccess, onerror);
2.12. BluetoothGATTCharacteristic
[NoInterfaceObject] interface BluetoothGATTCharacteristic { readonly attribute BluetoothGATTDescriptorVariant[] descriptors; readonly attribute boolean isBroadcast; readonly attribute boolean hasExtendedProperties; readonly attribute boolean isNotify; readonly attribute boolean isIndication; readonly attribute boolean isReadable; readonly attribute boolean isSignedWrite; readonly attribute boolean isWritable; readonly attribute boolean isWriteNoResponse; readonly attribute BluetoothUUID? uuid; void readValue(ReadValueSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void writeValue(Bytes value, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); long addValueChangeListener(ReadValueSuccessCallback callback) raises(WebAPIException); void removeValueChangeListener(long watchID); };
Since: 2.3.1
Attributes
-
readonly
BluetoothGATTDescriptorVariant[]
descriptorsA list of descriptors in this characteristic.
Since: 2.3.1
Remark: The type of this field is BluetoothGATTDescriptor for descriptors of characteristics retrieved from services of remote GATT servers and BluetoothGATTServerDescriptor for descriptors of characteristics retrieved from the services of local GATT server.
-
readonly
boolean isBroadcastIndicates if the characteristic is broadcastable.
Since: 2.3.1
-
readonly
boolean hasExtendedPropertiesIndicates if the characteristic has extended properties.
Since: 2.3.1
-
readonly
boolean isNotifyIndicates if the characteristic supports notification.
Since: 2.3.1
-
readonly
boolean isIndicationIndicates if the characteristic supports indication.
Since: 2.3.1
-
readonly
boolean isReadableIndicates if the characteristic is readable.
Since: 2.3.1
-
readonly
boolean isSignedWriteIndicates if the characteristic supports write with the signature.
Since: 2.3.1
-
readonly
boolean isWritableIndicates if the characteristic is writable.
Since: 2.3.1
-
readonly
boolean isWriteNoResponseIndicates if the characteristic supports writing without response.
Since: 2.3.1
-
readonly
BluetoothUUID uuid [nullable]UUID of the characteristic.
Since: 6.0
Remark: uuid is set to null, if the value cannot be retrieved.
Methods
-
readValue
-
Reads the characteristic value from the remote device. Updates characteristic value attribute.
void readValue(ReadValueSuccessCallback successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
The ErrorCallback is launched with these error types:
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: BluetothGATTServerCharacteristic objects do not support this function. An attempt to call it for such an object will result in an exception.
Parameters:
- successCallback: Callback function that is called when the characteristic value is read successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type InvalidStateError, if the local Bluetooth le adapter is currently not enabled.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type NotSupportedError, if the method is called for BluetoothGATTServerCharacteristic.
Code example:
function onerror(e) { console.log("Failed to connect to device: " + e.message); } function proccessDevice(device) { device.connect(onConnected, onerror); function onConnected() { var service = device.getService(device.uuids[0]); if (service.characteristics.length > 0) { var characteristic = service.characteristics[0]; characteristic.readValue(function(val) { console.log("Value read: " + val); device.disconnect(); }); } } } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); proccessDevice(device); } });
-
writeValue
-
Writes the characteristic value to the remote device.
void writeValue(Bytes value, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
The ErrorCallback is launched with these error types:
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: BluetothGATTServerCharacteristic objects do not support this function. An attempt to call it for such an object will result in an exception.
Parameters:
- value: The characteristic value to write.
- successCallback [optional] [nullable]: Callback function that is called when the characteristic value is written successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type InvalidStateError, if the local Bluetooth le adapter is currently not enabled.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type NotSupportedError, if the method is called for BluetoothGATTServerCharacteristic.
Code example:
function onerror(e) { console.log("Failed to connect to device: " + e.message); } function proccessDevice(device) { device.connect(onConnected, onerror); function onConnected() { var service = device.getService(device.uuids[0]); if (service.characteristics.length > 0) { var characteristic = service.characteristics[0]; var data = new Array(1, 2, 3, 4, 5, 6); characteristic.writeValue(data, function() { console.log("Value written"); device.disconnect(); }, function(e) { console.log("Failed to write: " + e.message); }); } } } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); proccessDevice(device); } });
-
addValueChangeListener
-
Registers a callback to be called when characteristic value of the characteristic changes.
long addValueChangeListener(ReadValueSuccessCallback callback);
Since: 2.3.1
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: BluetothGATTServerCharacteristic objects do not support this function. An attempt to call it for such an object will result in an exception.
Parameters:
- callback: Listener function that is called when the connection state changes.
Return value:
-
long:
The watchID to be used to unregister the listener.
Exceptions:
- WebAPIException
with error type SecurityError, if the application does not have the privilege to call this method.
with error type NotSupportedError, if the method is called for BluetoothGATTServerCharacteristic.
Code example:
function proccessDevice(device) { function onConnected() { var service = device.getService("5BCE9431-6C75-32AB-AFE0-2EC108A30860"); if (service.characteristics.length > 0) { var characteristic = service.characteristics[0]; var watchID; watchID = characteristic.addValueChangeListener(function(value) { console.log("Characteristic value changed: " + value); characteristic.removeValueChangeListener(watchID); device.disconnect(); }); } } device.connect(onConnected); } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); adapter.stopScan(); proccessDevice(device); } });
-
removeValueChangeListener
-
Unregisters a characteristic value change listener.
void removeValueChangeListener(long watchID);
Since: 2.3.1
Calling this function has no effect if there is no listener with given id.
Remark: Example of using can be find at addValueChangeListener code example.
Remark: Value change listeners cannot be registered and thus unregistered for BluetothGATTServerCharacteristic objects. An attempt to remove value change listener for such an object will result in no operation.
Parameters:
- watchID: The watchID identifier returned by the addValueChangeListener() method.
2.13. BluetoothGATTServerCharacteristicInit
dictionary BluetoothGATTServerCharacteristicInit { BluetoothUUID uuid; BluetoothGATTServerDescriptorInit[]? descriptors = null; boolean isBroadcast = false; boolean hasExtendedProperties = false; boolean isNotify = false; boolean isIndication = false; boolean isReadable = false; boolean isSignedWrite = false; boolean isWritable = false; boolean isWriteNoResponse = false; boolean readPermission = false; boolean writePermission = false; boolean encryptedReadPermission = false; boolean encryptedWritePermission = false; boolean encryptedSignedReadPermission = false; boolean encryptedSignedWritePermission = false; ReadValueRequestCallback? readValueRequestCallback = null; SuccessCallback? readValueSendResponseSuccessCallback = null; ErrorCallback? readValueSendResponseErrorCallback = null; WriteValueRequestCallback? writeValueRequestCallback = null; SuccessCallback? writeValueSendResponseSuccessCallback = null; ErrorCallback? writeValueSendResponseErrorCallback = null; };
Since: 6.0
This dictionary is used as a definition of a characteristic to be registered in a service of the local GATT server.
readValueRequestCallback and writeValueRequestCallback are callbacks called when a client reads or writes the value of the characteristic respectively. They can be set or replaced with another functions, after registering the service containing the characteristic, with BluetoothGATTServerCharacteristic.setReadValueRequestCallback() and BluetoothGATTServerCharacteristic.setWriteValueRequestCallback().
readValueSendResponseSuccessCallback and writeValueSendResponseSuccessCallback are success callbacks called when a response sent from readValueRequestCallback or writeValueRequestCallback reaches client. They can be set or replaced with another functions, after registering the service containing the characteristic, with BluetoothGATTServerCharacteristic.setReadValueRequestCallback() and BluetoothGATTServerCharacteristic.setWriteValueRequestCallback().
readValueSendResponseErrorCallback and writeValueSendResponseErrorCallback are error callbacks called when an attempt to send a response to a client from readValueRequestCallback or writeValueRequestCallback fails. They can be set or replaced with another functions, after registering the service containing the characteristic, with BluetoothGATTServerCharacteristic.setReadValueRequestCallback() and BluetoothGATTServerCharacteristic.setWriteValueRequestCallback().
Code example:
/* nameDescriptor, placeDescriptor are BluetoothGATTServerDescriptorInit objects */ /* readValueCallback, writeValueCallback are read/write request callbacks */ /* readValueSendResponseSuccessCallback and writeValueSendResponseSuccessCallback */ /* are success callbacks */ /* and writeValueSendResponseErrorCallback and readValueSendResponseErrorCallback */ /* are error callbacks */ var characteristicParameters = { uuid: "0180", descriptors: [nameDescriptor, placeDescriptor], /* Characteristic's properties */ isBroadcast: false, hasExtendedProperties: false, isNotify: false, isIndication: false, isReadable: true, isSignedWrite: false, isWritable: true, isWriteNoResponse: false, /* Characteristic's permissions */ readPermission: true, writePermission: true, encryptedReadPermission: false, encryptedWritePermission: false, encryptedSignedReadPermission: false, encryptedSignedWritePermission: false, readValueRequestCallback: readValueCallback, readValueSendResponseSuccessCallback: readValueSendResponseSuccessCallback, readValueSendResponseErrorCallback: readValueSendResponseErrorCallback, writeValueRequestCallback: writeValueCallback, writeValueSendResponseSuccessCallback: writeValueSendResponseSuccessCallback, writeValueSendResponseErrorCallback: writeValueSendResponseErrorCallback };
2.14. BluetoothGATTServerCharacteristic
[NoInterfaceObject] interface BluetoothGATTServerCharacteristic : BluetoothGATTCharacteristic { readonly attribute boolean readPermission; readonly attribute boolean writePermission; readonly attribute boolean encryptedReadPermission; readonly attribute boolean encryptedWritePermission; readonly attribute boolean encryptedSignedReadPermission; readonly attribute boolean encryptedSignedWritePermission; void notifyAboutValueChange(Bytes value, BluetoothAddress? clientAddress, optional NotificationCallback? notificationCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void setReadValueRequestCallback(ReadValueRequestCallback readValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback) raises(WebAPIException); void setWriteValueRequestCallback(WriteValueRequestCallback writeValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback) raises(WebAPIException); };
Since: 6.0
Attributes
-
readonly
boolean readPermissionIndicates if clients have the permission to read the value of the characteristic.
Since: 6.0
-
readonly
boolean writePermissionIndicates if clients have the permission to write the value of the characteristic.
Since: 6.0
-
readonly
boolean encryptedReadPermissionIndicates if clients have the permission to read the value of the characteristic through encrypted connections.
Since: 6.0
-
readonly
boolean encryptedWritePermissionIndicates if clients have the permission to write the value of the characteristic through encrypted connections.
Since: 6.0
-
readonly
boolean encryptedSignedReadPermissionIndicates if clients have the permission to perform signed reads of the characteristic's value.
Since: 6.0
-
readonly
boolean encryptedSignedWritePermissionIndicates if clients have the permission to perform signed writes of the characteristic's value.
Since: 6.0
Methods
-
notifyAboutValueChange
-
Notifies the clients of the local GATT server of the changes in the characteristic.
void notifyAboutValueChange(Bytes value, BluetoothAddress? clientAddress, optional NotificationCallback? notificationCallback, optional ErrorCallback? errorCallback);
Since: 6.0
This function sends a BLE notification or indication about a change of characteristic's value to clients that registered for it. If a particular client is specified, only he gets the update. Otherwise it is sent to all clients connected to the local GATT server, who registered for the updates.
Clients can only register for characteristic's notifications or indications, if the characteristic defines a Client Characteristic Configuration Descriptor (CCCD), as described in the Bluetooth standard. CCCD has to be defined as any other descriptor, using BluetoothGATTServerDescriptorInit.
The ErrorCallback is launched with these error types:
- InvalidValuesError - If any of the parameters is invalid.
- NotSupportedError - If the feature is not supported.
- AbortError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: To notify the clients the service with current characteristic must be registered (see BluetoothGATTServer::registerService()) and available for clients (see BluetoothGATTServer::start()).
Parameters:
- value: The new value of the characteristic.
- clientAddress [nullable]: The address of the client to be notified about the value change. If a null is passed, all clients will be notified.
- notificationCallback [optional] [nullable]: The callback called for each attempt of a client notification.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure of sending notification.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
/* this example assumes that the local gatt server with at least one service which has at least one */ /* characteristic already exists */ var callback = { onnotificationsuccess: function(clientAddress) { console.log(clientAddress + " notified about change."); }, onnotificationfail: function(clientAddress, error) { console.error("Couldn't notify " + clientAddress + " about change:" + error.name); }, onnotificationfinish: function(clientAddress) { console.log("Finished notifying about change."); } }; function errorCallback(error) { console.error("Failed to notify about value change: " + error.name + ": " + error.message); } server.services[0].characteristics[0].notifyAboutValueChange("1234", null, callback, errorCallback);
-
setReadValueRequestCallback
-
Registers the callback called when a client reads the value of the characteristic from the local GATT server.
void setReadValueRequestCallback(ReadValueRequestCallback readValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback);
Since: 6.0
The callback, registered with this function, is called when a remote client requests to read the value of the characteristic. The server can respond to such requests by returning a GATTRequestReply object from the callback. If ReadValueRequestCallback for the characteristic is not registered, or it does not return a GATTRequestReply, clients will not be able to get the value of this characteristic.
A callback set with this function overwrites any previously set ReadValueRequestCallback.
The errorCallback will be launched in the following situations:
- NotSupportedError - If the feature is not supported.
- AbortError - If any other error occurs.
The sendResponseErrorCallback will be launched in the following situations:
- NotSupportedError - If the feature is not supported.
- InvalidValuesError - If GATTRequestReply::statusCode or GATTRequestReply::data is invalid.
- AbortError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- readValueRequestCallback: The callback called when a client reads the value of the characteristic.
- successCallback [optional] [nullable]: Callback function that is called when the readValueRequestCallback is registered successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure of readValueRequestCallback registration.
- sendResponseSuccessCallback [optional] [nullable]: Callback function that is called when responses returned from readValueRequestCallbacks are sent successfully.
- sendResponseErrorCallback [optional] [nullable]: Callback function that is called when responses returned from readValueRequestCallbacks are not sent due to an error.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
/* this example assumes that the local gatt server with at least one service which has at least one */ /* characteristic already exists */ var callback = function(clientAddress, offset) { console.log(clientAddress + " requested to read characteristic's value with offset: " + offset); return new tizen.GATTRequestReply(0, "0x1234"); }; server.services[0].characteristics[0].setReadValueRequestCallback(callback);
-
setWriteValueRequestCallback
-
Registers the callback called when a client writes the value of the characteristic of the local GATT server.
void setWriteValueRequestCallback(WriteValueRequestCallback writeValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback);
Since: 6.0
The callback, registered with this function, is called when a remote client requests to write the value of the characteristic. The server can respond to such requests by returning a GATTRequestReply object from the callback. If WriteValueRequestCallback for the characteristic is not registered, or it does not return a GATTRequestReply, clients will not be able to get the value of this characteristic.
A callback set with this function overwrites any previously set WriteValueRequestCallback.
The errorCallback will be launched in the following situations:
- NotSupportedError - If the feature is not supported.
- AbortError - If any other error occurs.
The sendResponseErrorCallback will be launched in the following situations:
- NotSupportedError - If the feature is not supported.
- InvalidValuesError - If GATTRequestReply::statusCode or GATTRequestReply::data is invalid.
- AbortError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- writeValueRequestCallback: The callback called when a client writes the value of the characteristic.
- successCallback [optional] [nullable]: Callback function that is called when the writeValueRequestCallback is registered successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure of writeValueRequestCallback registration.
- sendResponseSuccessCallback [optional] [nullable]: Callback function that is called when responses returned from writeValueRequestCallbacks are sent successfully.
- sendResponseErrorCallback [optional] [nullable]: Callback function that is called when responses returned from writeValueRequestCallbacks are not sent due to an error.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
/* this example assumes that the local gatt server with at least one service which has at least one */ /* characteristic already exists */ var callback = function(clientAddress, value, offset, replyRequired) { console.log(clientAddress + " requested to write characteristic's value: " + value + " with offset: " + offset); return replyRequired ? new tizen.GATTRequestReply(0, "0x1234") : null; }; server.services[0].characteristics[0].setWriteValueRequestCallback(callback);
2.15. BluetoothGATTDescriptor
[NoInterfaceObject] interface BluetoothGATTDescriptor { readonly attribute BluetoothUUID? uuid; void readValue(ReadValueSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void writeValue(Bytes value, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); };
Since: 2.3.1
Attributes
-
readonly
BluetoothUUID uuid [nullable]UUID of the descriptor.
Since: 6.0
Remark: uuid is set to null, if the value cannot be retrieved.
Methods
-
readValue
-
Reads descriptor value from remote device. Updates descriptor value attribute.
void readValue(ReadValueSuccessCallback successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
The ErrorCallback is launched with these error types:
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: BluetothGATTServerDescriptor objects do not support this function. An attempt to call it for such an object will result in an exception.
Parameters:
- successCallback: Callback function that is called when the descriptor value is read successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type InvalidStateError, if the local Bluetooth le adapter is currently not enabled.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type NotSupportedError, if the method is called for BluetoothGATTServerDescriptor.
Code example:
function onerror(e) { console.log("Failed to connect to device: " + e.message); } function proccessDevice(device) { device.connect(onConnected, onerror); function onConnected() { var service = device.getService(device.uuids[0]); if (service.characteristics.length > 0) { var characteristic = service.characteristics[0]; var descriptor = characteristic.descriptors[0]; descriptor.readValue(function(val) { console.log("Value read: " + val); device.disconnect(); }); } } } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); proccessDevice(device); } });
-
writeValue
-
Writes the descriptor value to the remote device.
void writeValue(Bytes value, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
The ErrorCallback is launched with these error types:
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: BluetothGATTServerDescriptor objects do not support this function. An attempt to call it for such an object will result in an exception.
Parameters:
- value: The descriptor value to write.
- successCallback [optional] [nullable]: Callback function that is called when the descriptor value is written successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type InvalidStateError, if the local Bluetooth le adapter is currently not enabled.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type NotSupportedError, if the method is called for BluetoothGATTServerDescriptor.
Code example:
function onerror(e) { console.log("Failed to connect to device: " + e.message); } function proccessDevice(device) { device.connect(onConnected, onerror); function onConnected() { var service = device.getService(device.uuids[0]); if (service.characteristics.length > 0) { var characteristic = service.characteristics[0]; var data = new Array(1, 2, 3, 4, 5, 6); var descriptor = characteristic.descriptors[0]; descriptor.writeValue(data, function() { console.log("Value written"); device.disconnect(); }, function(e) { console.log("Failed to write: " + e.message); }); } } } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); proccessDevice(device); } });
2.16. BluetoothGATTServerDescriptorInit
dictionary BluetoothGATTServerDescriptorInit { BluetoothUUID uuid; boolean readPermission = false; boolean writePermission = false; boolean encryptedReadPermission = false; boolean encryptedWritePermission = false; boolean encryptedSignedReadPermission = false; boolean encryptedSignedWritePermission = false; ReadValueRequestCallback? readValueRequestCallback = null; SuccessCallback? readValueSendResponseSuccessCallback = null; ErrorCallback? readValueSendResponseErrorCallback = null; WriteValueRequestCallback? writeValueRequestCallback = null; SuccessCallback? writeValueSendResponseSuccessCallback = null; ErrorCallback? writeValueSendResponseErrorCallback = null; };
Since: 6.0
This dictionary is used as a definition of a descriptor to be registered in a characteristic of the local GATT server.
readValueRequestCallback and writeValueRequestCallback are callbacks called when a client reads or writes the value of the descriptor respectively. They can be set or replaced with another functions after registering the service containing the descriptor with BluetoothGATTServerDescriptor.setReadValueRequestCallback() and BluetoothGATTServerDescriptor.setWriteValueRequestCallback().
readValueSendResponseSuccessCallback and writeValueSendResponseSuccessCallback are success callbacks called when a response sent from readValueRequestCallback or writeValueRequestCallback reaches client. They can be set or replaced with another functions, after registering the service containing the characteristic, with BluetoothGATTServerDescriptor.setReadValueRequestCallback() and BluetoothGATTServerDescriptor.setWriteValueRequestCallback().
readValueSendResponseErrorCallback and writeValueSendResponseErrorCallback are error callbacks called when an attempt to send a response to a client from readValueRequestCallback or writeValueRequestCallback fails. They can be set or replaced with another functions, after registering the service containing the characteristic, with BluetoothGATTServerDescriptor.setReadValueRequestCallback() and BluetoothGATTServerDescriptor.setWriteValueRequestCallback().
Code example:
/* readValueCallback, writeValueCallback are read/write request callbacks */ /* readValueSendResponseSuccessCallback and writeValueSendResponseSuccessCallback are success */ /* callbacks */ /* and writeValueSendResponseErrorCallback and readValueSendResponseErrorCallback are error */ /* callbacks */ var descriptorProperties = { uuid: "0180", /* Descriptor's permissions */ readPermission: true, writePermission: true, encryptedReadPermission: false, encryptedWritePermission: false, encryptedSignedReadPermission: false, encryptedSignedWritePermission: false, /* Read/write value callbacks */ readValueRequestCallback: readValueCallback, readValueSendResponseSuccessCallback: readValueSendResponseSuccessCallback, readValueSendResponseErrorCallback: readValueSendResponseErrorCallback, writeValueRequestCallback: writeValueCallback, writeValueSendResponseSuccessCallback: writeValueSendResponseSuccessCallback, writeValueSendResponseErrorCallback: writeValueSendResponseErrorCallback };
2.17. BluetoothGATTServerDescriptor
[NoInterfaceObject] interface BluetoothGATTServerDescriptor : BluetoothGATTDescriptor { readonly attribute boolean readPermission; readonly attribute boolean writePermission; readonly attribute boolean encryptedReadPermission; readonly attribute boolean encryptedWritePermission; readonly attribute boolean encryptedSignedReadPermission; readonly attribute boolean encryptedSignedWritePermission; void setReadValueRequestCallback(ReadValueRequestCallback readValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback) raises(WebAPIException); void setWriteValueRequestCallback(WriteValueRequestCallback writeValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback) raises(WebAPIException); };
Since: 6.0
Attributes
-
readonly
boolean readPermissionIndicates if clients have the permission to read the value of the descriptor.
Since: 6.0
-
readonly
boolean writePermissionIndicates if clients have the permission to write the value of the descriptor.
Since: 6.0
-
readonly
boolean encryptedReadPermissionIndicates if clients have the permission to read the value of the descriptor through encrypted connections.
Since: 6.0
-
readonly
boolean encryptedWritePermissionIndicates if clients have the permission to write the value of the descriptor through encrypted connections.
Since: 6.0
-
readonly
boolean encryptedSignedReadPermissionIndicates if clients have the permission to perform signed reads of the charactersitic's value.
Since: 6.0
-
readonly
boolean encryptedSignedWritePermissionIndicates if clients have the permission to perform signed writes of the charactersitic's value.
Since: 6.0
Methods
-
setReadValueRequestCallback
-
Registers the callback called when a client reads the value of the descriptor from the local GATT server.
void setReadValueRequestCallback(ReadValueRequestCallback readValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback);
Since: 6.0
The callback, registered with this function, is called when a remote client requests to read the value of the descriptor. The server can respond to such requests by returning a GATTRequestReply object from the callback. If ReadValueRequestCallback for the descriptor is not registered, or it does not return a GATTRequestReply, clients will not be able to get the value of this descriptor.
A callback set with this function overwrites any previously set ReadValueRequestCallback.
The errorCallback will be launched in the following situations:
- NotSupportedError - If the feature is not supported.
- AbortError - If any other error occurs.
The sendResponseErrorCallback will be launched in the following situations:
- NotSupportedError - If the feature is not supported.
- InvalidValuesError - If GATTRequestReply::statusCode or GATTRequestReply::data is invalid.
- AbortError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- readValueRequestCallback: The callback called when a client reads the value of the descriptor.
- successCallback [optional] [nullable]: Callback function that is called when the readValueRequestCallback is registered successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure of readValueRequestCallback registration.
- sendResponseSuccessCallback [optional] [nullable]: Callback function that is called when responses returned from readValueRequestCallbacks are sent successfully.
- sendResponseErrorCallback [optional] [nullable]: Callback function that is called when responses returned from readValueRequestCallbacks are not sent due to an error.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
/* this example assumes that the local gatt server with at least one service which has at least one */ /* characteristic with at least one descriptor already exists */ var callback = function(clientAddress, offset) { console.log(clientAddress + " requested to read characteristic's value with offset: " + offset); return new tizen.GATTRequestReply(0, "0x1234"); }; server.services[0].characteristics[0].descriptors[0].setReadValueRequestCallback(callback);
-
setWriteValueRequestCallback
-
Registers the callback called when a remote client writes the value of the descriptor from the local GATT server.
void setWriteValueRequestCallback(WriteValueRequestCallback writeValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback);
Since: 6.0
The callback, registered with this function, is called when a remote client requests to write the value of the descriptor. The server can respond to such requests by returning a GATTRequestReply object from the callback. If WriteValueRequestCallback for the descriptor is not registered, or it does not return a GATTRequestReply, clients will not be able to get the value of this descriptor.
A callback set with this function overwrites any previously set WriteValueRequestCallback.
The errorCallback will be launched in the following situations:
- NotSupportedError - If the feature is not supported.
- AbortError - If any other error occurs.
The sendResponseErrorCallback will be launched in the following situations:
- NotSupportedError - If the feature is not supported.
- InvalidValuesError - If GATTRequestReply::statusCode or GATTRequestReply::data is invalid.
- AbortError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- writeValueRequestCallback: The callback called when a client writes the value of the descriptor.
- successCallback [optional] [nullable]: Callback function that is called when the writeValueRequestCallback is registered successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure of writeValueRequestCallback registration.
- sendResponseSuccessCallback [optional] [nullable]: Callback function that is called when responses returned from writeValueRequestCallbacks are sent successfully.
- sendResponseErrorCallback [optional] [nullable]: Callback function that is called when responses returned from writeValueRequestCallbacks are not sent due to an error.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
/* this example assumes that the local gatt server with at least one service which has at least one */ /* characteristic with at least one descriptor already exists */ var callback = function(clientAddress, value, offset, replyRequired) { console.log(clientAddress + " requested to write descriptor's value: " + value + " with offset: " + offset); return replyRequired ? new tizen.GATTRequestReply(0, "0x1234") : null; }; server.services[0].characteristics[0].descriptors[0].setWriteValueRequestCallback(callback);
2.18. BluetoothGATTServer
[NoInterfaceObject] interface BluetoothGATTServer { readonly attribute boolean isRunning; readonly attribute BluetoothGATTServerService[] services; void start(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void stop(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void registerService(BluetoothGATTServerServiceInit service, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void unregisterAllServices(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void getConnectionMtu(BluetoothAddress clientAddress, ConnectionMtuCallback callback, optional ErrorCallback? errorCallback) raises(WebAPIException); };
Since: 6.0
Attributes
-
readonly
boolean isRunningThe flag indicating if remote GATT clients can currently connect to the server, exposing services defined in BluetoothGATTServer::services. It is toggled on start() and stop() calls.
Since: 6.0
-
readonly
BluetoothGATTServerService[]
servicesThe list of GATT services hosted on this server.
Since: 6.0
Methods
-
start
-
Starts the local GATT server. After it starts, it can conduct GATT server operations. Also, the remote clients can discover and use the services provided by the local Bluetooth GATT Server.
void start(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 6.0
The ErrorCallback will be launched in the following situations:
- InvalidStateError - If the server is already running.
- NotSupportedError - If the feature is not supported.
- AbortError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- successCallback [optional] [nullable]: Called when the server is started.
- errorCallback [optional] [nullable]: The method to invoke when an error occurs.
Exceptions:
- WebAPIException
with error type InvalidStateError, if the Bluetooth adapter is not enabled.
with error type TypeMismatchError, if any input attribute is not compatible with the expected type for this attribute.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type AbortError, if any other error occurs.
Code example:
var onSuccess = function() { console.log("Server started successfully!"); }; var onError = function(e) { console.error("Server didn't start, error: " + e); }; var server = tizen.bluetooth.getGATTServer(); server.start(onSuccess, onError);
Output example:
Server started successfully!
-
stop
-
Stops GATT server operation.
void stop(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 6.0
After the stop, remote clients will not be able to discover the local GATT server's services.
The ErrorCallback will be launched in the following situations:
- InvalidStateError - If the server is not running.
- NotSupportedError - If the feature is not supported.
- AbortError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- successCallback [optional] [nullable]: Called when the server is stopped.
- errorCallback [optional] [nullable]: The method to invoke when an error occurs.
Exceptions:
- WebAPIException
with error type InvalidStateError, if the Bluetooth adapter is not enabled.
with error type TypeMismatchError, if any input attribute is not compatible with the expected type for this attribute.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type AbortError, if any other error occurs.
Code example:
/* this example assumes that local gatt server already exists and it is started */ var onSuccess = function() { console.log("Server stopped successfully!"); }; var onError = function(e) { console.error("Server didn't stop, error: " + e); }; server.stop(onSuccess, onError);
Output example:
Server stopped successfully!
-
registerService
-
Registers a primary service in the local GATT server.
void registerService(BluetoothGATTServerServiceInit service, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 6.0
The service is available for clients after BluetoothGATTServer::start() call.
The ErrorCallback is launched with these error types:
- InvalidStateError - If the service cannot be registered in the current state of the server.
- NotSupportedError - If the feature is not supported.
- InvalidValuesError - If any of the input parameters contains an invalid value
- AbortError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: Services can only be registered before starting server.
Parameters:
- service: The definition of a service to be registered in the local GATT server.
- successCallback [optional] [nullable]: Called when the local GATT server's services are successfully registered.
- errorCallback [optional] [nullable]: The method to invoke when an error occurs.
Exceptions:
- WebAPIException
with error type InvalidStateError, if the Bluetooth adapter is not enabled.
with error type TypeMismatchError, if any input attribute is not compatible with the expected type for this attribute.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var gattService = {serviceUuid: "0955", isPrimary: false, services: [], characteristics: []}; var successCB = function() { console.log("Service successfully registered!"); }; var errorCB = function(e) { console.log("Service not registered, error: " + e); }; var server = tizen.bluetooth.getGATTServer(); server.registerService(gattService, successCB, errorCB);
Output example:
Service successfully registered!
-
unregisterAllServices
-
Unregisters all services from the local GATT server.
void unregisterAllServices(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 6.0
This method unregisters all services and all their characteristics from the local GATT server.
The ErrorCallback is launched with these error types:
- InvalidStateError - If the service cannot be unregistered in the current state of the GATT server.
- AbortError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: Currently running local GATT server is stopped after calling this method.
Parameters:
- successCallback [optional] [nullable]: Callback function that is called when services are successfully unregistered from the local GATT server.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
/* this example assumes that the local gatt server already exists */ var successCB = function() { console.log("Services successfully unregistered!"); }; var errorCB = function(e) { console.log("Services not unregistered, error: " + e); }; server.unregisterAllServices(successCB, errorCB);
Output example:
Services successfully unregistered!
-
getConnectionMtu
-
Gets the ATT MTU for the connection with a client.
void getConnectionMtu(BluetoothAddress clientAddress, ConnectionMtuCallback callback, optional ErrorCallback? errorCallback);
Since: 6.0
The ErrorCallback is launched with these error types:
- InvalidStateError - If the server is not running.
- NotSupportedError - If the feature is not supported.
- AbortError - If any other error occurs.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- clientAddress: MAC address of the client, for connection with whom the MTU is to be retrieved.
- callback: Callback functions that are called when the connection state changes.
- errorCallback [optional] [nullable]: Callback function that is called when getting MTU of a connection fails.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
/* this example assumes that the local gatt server already exists */ var successCB = function(mtu) { console.log("ATT MTU value is: " + mtu); }; var errorCB = function(e) { console.log("Cannot retrieve the ATT MTU, error: " + e); }; server.getConnectionMtu("12:34:56:78:90:ab", successCB, errorCB);
Output example:
ATT MTU value is: 123
2.19. BluetoothLEScanCallback
[Callback=FunctionOnly, NoInterfaceObject] interface BluetoothLEScanCallback { void onsuccess(BluetoothLEDevice device); };
Since: 2.3.1
Remark: Example of using can be find at startScan code example.
Methods
-
onsuccess
-
Called when a new device is successfully discovered in the process of scanning.
void onsuccess(BluetoothLEDevice device);
Since: 2.3.1
Parameters:
- device: Device that is found.
2.20. BluetoothLEAdvertiseCallback
[Callback=FunctionOnly, NoInterfaceObject] interface BluetoothLEAdvertiseCallback { void onstate(BluetoothAdvertisingState state); };
Since: 2.3.1
Remark: Example of using can be find at startAdvertise code example.
Methods
-
onstate
-
Called when the advertising state is changed.
void onstate(BluetoothAdvertisingState state);
Since: 2.3.1
Parameters:
- state: State that is Advertising process.
2.21. BluetoothLEConnectChangeCallback
[Callback, NoInterfaceObject] interface BluetoothLEConnectChangeCallback { void onconnected(BluetoothLEDevice device); void ondisconnected(BluetoothLEDevice device); };
Since: 2.3.1
Remark: Example of using can be find at addConnectStateChangeListener code example.
Methods
-
onconnected
-
Called at the beginning of connect to a specific LE based service on a remote Bluetooth LE device.
void onconnected(BluetoothLEDevice device);
Since: 2.3.1
-
ondisconnected
-
Called at the beginning of disconnect to a specific LE based service on a remote Bluetooth LE device.
void ondisconnected(BluetoothLEDevice device);
Since: 2.3.1
2.22. ReadValueSuccessCallback
[Callback=FunctionOnly, NoInterfaceObject] interface ReadValueSuccessCallback { void onread(byte[] value); };
Since: 2.3.1
Remark: Example of using can be find at BluetoothGATTCharacteristic.readValue() and BluetoothGATTDescriptor.readValue() code examples.
2.23. GATTRequestReply
[Constructor(long statusCode = 0, optional Bytes data)] interface GATTRequestReply { attribute long statusCode; attribute Bytes? data; };
Since: 6.0
Attributes
-
long statusCodeReply status code.
Since: 6.0
-
Bytes data [nullable]Response data. It is only relevant for read value requests. It will be ignored in replies to write requests and thus can be uninitialized in such replies.
Since: 6.0
2.24. ReadValueRequestCallback
[Callback=FunctionOnly, NoInterfaceObject] interface ReadValueRequestCallback { GATTRequestReply? onreadrequest(BluetoothAddress clientAddress, long offset); };
Since: 6.0
Remark: Example of using can be found at BluetoothGATTServerCharacteristic.setReadValueRequestCallback() and BluetoothGATTServerDescriptor.setReadValueRequestCallback() code examples.
Methods
-
onreadrequest
-
Called when a client makes a read request for GATT characteristic to the connected local GATT server.
GATTRequestReply? onreadrequest(BluetoothAddress clientAddress, long offset);
Since: 6.0
The server should reply to requests by returning a GATTRequestReply object with requested data and a proper status code. If the callback does not return a GATTRequestReply, the client will not receive a response.
Parameters:
- clientAddress: MAC address of the client that requested the value read of the GATT entity.
- offset: The offset given for the value of characteristic to read.
Return value:
-
GATTRequestReply [nullable]:
GATTRequestReply object with a status code and requested data.
2.25. WriteValueRequestCallback
[Callback=FunctionOnly, NoInterfaceObject] interface WriteValueRequestCallback { GATTRequestReply? onwriterequest(BluetoothAddress clientAddress, byte[] value, long offset, boolean replyRequired); };
Since: 6.0
Remark: Example of using can be found at BluetoothGATTServerCharacteristic.setWriteValueRequestCallback() and BluetoothGATTServerDescriptor.setWriteValueRequestCallback() code examples.
Methods
-
onwriterequest
-
Called when a client connected to the local GATT server requests characteristic's value write.
GATTRequestReply? onwriterequest(BluetoothAddress clientAddress, byte[] value, long offset, boolean replyRequired);
Since: 6.0
The server should reply to requests by returning a GATTRequestReply object with a status code. If the callback does not return a GATTRequestReply, the client will not receive a response.
Parameters:
- clientAddress: MAC address of the client that requested the value write of the GATT entity.
- value: Value to be written to the GATT entity.
- offset: Offset from which the value is to be written.
- replyRequired: Flag indicating whether the client requested an answer to the request. If it's false, the client preforms the write without response operation defined in Bluetooth Core Specification.
2.26. NotificationCallback
[Callback=FunctionOnly, NoInterfaceObject] interface NotificationCallback { void onnotificationsuccess(BluetoothAddress clientAddress); void onnotificationfail(BluetoothAddress clientAddress, WebAPIException error); void onnotificationfinish(BluetoothAddress clientAddress); };
Since: 6.0
Remark: Example of using can be found at BluetoothGATTServerCharacteristic.notifyAboutValueChange() code examples.
Methods
-
onnotificationsuccess
-
Called when the local GATT server successfully notifies a client of a characteristic's value change.
void onnotificationsuccess(BluetoothAddress clientAddress);
Since: 6.0
Parameters:
- clientAddress: MAC address of the client that was notified.
-
onnotificationfail
-
Called when the local GATT server fails to notify a client of a characteristic's value change.
void onnotificationfail(BluetoothAddress clientAddress, WebAPIException error);
Since: 6.0
Parameters:
- clientAddress: MAC address of the client that was notified.
- error: The error type and an error message from Tizen's Bluetooth LE stack.
-
onnotificationfinish
-
Called when the last of all client notifications was sent.
void onnotificationfinish(BluetoothAddress clientAddress);
Since: 6.0
Parameters:
- clientAddress: MAC address of the last client that was notified.
2.27. ConnectionMtuCallback
[Callback=FunctionOnly, NoInterfaceObject] interface ConnectionMtuCallback { void onsuccess(long mtu); };
Since: 6.0
Remark: Example of using can be found at BluetoothGATTServer.getConnectionMtu() code example.
2.28. BluetoothDevice
[NoInterfaceObject] interface BluetoothDevice { readonly attribute DOMString name; readonly attribute BluetoothAddress address; readonly attribute BluetoothClass deviceClass; readonly attribute boolean isBonded; readonly attribute boolean isTrusted; readonly attribute boolean isConnected; readonly attribute BluetoothUUID[] uuids; void connectToServiceByUUID(BluetoothUUID uuid, BluetoothSocketSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); };
Since: 2.3.1
A BluetoothDevice object can be retrieved using one of the following APIs:
- BluetoothAdapter.getDevice()
- BluetoothAdapter.getKnownDevices()
- BluetoothAdapter.discoverDevices()
- BluetoothAdapter.createBonding()
Attributes
-
readonly
DOMString nameThe readable name of this remote device.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.getDevice("11:22:33:44:55:66", function(device) { console.log("Device Name: " + device.name); });
-
readonly
BluetoothAddress addressThe hardware address of this remote device.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.getDevice("11:22:33:44:55:66", function(device) { console.log("Device Address: " + device.address); });
-
readonly
BluetoothClass deviceClassThe device class, which represents the type of the device and the services it provides.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.getDevice("11:22:33:44:55:66", function(device) { console.log("Device Major Class: " + device.deviceClass.major); });
-
readonly
boolean isBondedThe bond state of this remote device with the local device.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.getDevice("11:22:33:44:55:66", function(device) { console.log("Is bonded: " + (device.isBonded ? "Yes" : "No")); });
-
readonly
boolean isTrustedThe flag indicating whether the local device recognizes this remote device as a trusted device or not.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.getDevice("11:22:33:44:55:66", function(device) { console.log("Is trusted: " + (device.isTrusted ? "Yes" : "No")); });
-
readonly
boolean isConnectedThe flag indicating whether the connection state of this remote device with the local device.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.getDevice("11:22:33:44:55:66", function(device) { console.log("Is connected: " + (device.isConnected ? "Yes" : "No")); });
-
readonly
BluetoothUUID[]
uuidsThe list of 128-bit service UUIDs available on this remote device.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); var CHAT_SERVICE_UUID = "5BCE9431-6C75-32AB-AFE0-2EC108A30860"; adapter.getDevice("11:22:33:44:55:66", function(device) { var uuids = device.uuids; var services = ""; for (var i = 0; i < uuids.length; i++) { services += uuids[i] + "\n"; } console.log("Services found: " + services); if (uuids.indexOf(CHAT_SERVICE_UUID) != -1) { /* Connects to service. */ device.connectToServiceByUUID(CHAT_SERVICE_UUID, function(socket) { /* Connected to service, handle socket. */ }, function(e) { console.log("Could not connect to chat service !!!. Error: " + e.message); }); } });
Methods
-
connectToServiceByUUID
-
Connects to a specified service identified by uuid on this remote device.
void connectToServiceByUUID(BluetoothUUID uuid, BluetoothSocketSuccessCallback successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
If opening a connection is successful, then a BluetoothSocket object with open state is sent using successCallback, through which data can be exchanged by both devices.
The ErrorCallback is launched with these error types:
- NotFoundError - If there is no service with the specified uuid
- InvalidValuesError - If any of the input parameters contain an invalid value
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- uuid: 128-bit unique identifier, which specifies the service on the remote device.
- successCallback: Callback function that is called when an asynchronous call completes successfully.
- errorCallback [optional] [nullable]: Callback function that is called when opening of a socket fails.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); /* Purpose of code below is to enable Bluetooth on the device. */ var bluetoothSwitchAppControl = new tizen.ApplicationControl( "http://tizen.org/appcontrol/operation/edit", null, "application/x-bluetooth-on-off"); function launchSuccess() { console.log("Bluetooth Settings application is successfully launched"); } function launchError(error) { alert("An error occurred: " + error.name + ". Please enable Bluetooth through the Settings application"); } var serviceReply = { /* Called when the launched application reports success. */ onsuccess: function(data) { if (adapter.powered) { console.log("Bluetooth is successfully turned on"); adapter.getDevice("35:F4:59:D1:7A:03", onDeviceReady, function(e) { console.log("Error: " + e.message); }); } else { console.log("Bluetooth is still switched off"); } }, /* Called when launched application reports failure. */ onfailure: function() { alert("Bluetooth Settings application reported failure"); } }; /* connectToServiceByUUID sample code. */ var clientSocket = null; /* Calls a method that is invoked when user wants to send a message to a remote device. */ function sendMessage(msg) { /* Validates socket state, if everything is ok. */ if (clientSocket != null && clientSocket.state == "OPEN") { /* Sends the message. */ clientSocket.writeData(msg); } } /* Calls a method that is invoked when a socket is open. */ function onSocketConnected(socket) { clientSocket = socket; console.log("Opening a socket successfully!!!"); socket.onmessage = function() { var data = socket.readData(); var recvmsg = ""; for (var i = 0; i < data.length; i++) { recvmsg += String.fromCharCode(data[i]); } console.log("server msg >> " + recvmsg); }; socket.onclose = function() { console.log("socket disconnected"); }; } function onDeviceReady(device) { /* Validates device and service uuid. */ if (device.uuids.indexOf("5BCE9431-6C75-32AB-AFE0-2EC108A30860") != -1) { /* Opens socket. */ device.connectToServiceByUUID( "5BCE9431-6C75-32AB-AFE0-2EC108A30860", onSocketConnected, function(e) { console.log("Error connecting to service. Reason: " + e.message); }); } else { console.log("Chat service is not supported by this device"); } } /* Execution. */ if (adapter.powered) { console.log("Bluetooth is already enabled"); adapter.getDevice("35:F4:59:D1:7A:03", onDeviceReady, function(e) { console.log("Error: " + e.message); }); } else { console.log("Try to launch the Bluetooth Settings application"); tizen.application.launchAppControl( bluetoothSwitchAppControl, null, launchSuccess, launchError, serviceReply); }
2.29. BluetoothLEDevice
[NoInterfaceObject] interface BluetoothLEDevice { readonly attribute BluetoothAddress address; readonly attribute DOMString? name; readonly attribute long? txpowerlevel; readonly attribute unsigned long? appearance; readonly attribute BluetoothUUID[]? uuids; readonly attribute BluetoothLESolicitationUUID[]? solicitationuuids; readonly attribute BluetoothLEServiceData[]? serviceData; readonly attribute BluetoothLEManufacturerData? manufacturerData; readonly attribute long? rssi; void connect(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void disconnect(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); boolean isConnected() raises(WebAPIException); BluetoothGATTService getService(BluetoothUUID uuid) raises(WebAPIException); BluetoothUUID[] getServiceAllUuids() raises(WebAPIException); long addConnectStateChangeListener(BluetoothLEConnectChangeCallback listener) raises(WebAPIException); void removeConnectStateChangeListener(long watchID); unsigned long getAttMtu() raises(WebAPIException); void requestAttMtuChange(unsigned long newAttMtu) raises(WebAPIException); long addAttMtuChangeListener(ConnectionMtuCallback callback) raises(WebAPIException); void removeAttMtuChangeListener(long watchId) raises(WebAPIException); };
Since: 2.3.1
A BluetoothLEDevice object can be retrieved by using one of the following APIs:
- BluetoothLEAdapter.startScan()
- BluetoothLEConnectChangeCallback() passed to BluetoothGATTServer.registerClientConnectedCallback()
Attributes
-
readonly
BluetoothAddress addressThe address of the Bluetooth LE device from the scan result information.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { console.log("Found device: " + device.address); });
-
readonly
DOMString name [nullable]The name of the Bluetooth LE device from the scan result information.
Since: 2.3.1
Remark: This value will be set to null, if the object is obtained from BluetoothLEConnectChangeCallback.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { console.log("Found device: " + device.name); });
-
readonly
long txpowerlevel [nullable]The transmission power level of the Bluetooth LE device from the scan result information.
It represents the current transmit power level in dBm, and the level ranges from -100 dBm to +20 dBm to a resolution of 1 dBm.
Since: 2.3.1
Remark: This value will be set to null, if the object is obtained from BluetoothLEConnectChangeCallback.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { console.log("Found device: " + device.txpowerlevel); });
-
readonly
unsigned long appearance [nullable]The appearance of the Bluetooth LE device from the scan result information.
Since: 2.3.1
Remark: This value will be set to null, if the object is obtained from BluetoothLEConnectChangeCallback.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { console.log("Found device: " + device.appearance); });
-
readonly
BluetoothUUID[]
uuids [nullable]The list of service UUIDs from scan result.
Since: 2.3.1
Remark: This value will be set to null, if the object is obtained from BluetoothLEConnectChangeCallback.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { var uuids = device.uuids; var services = ""; for (var i = 0; i < uuids.length; i++) { services += uuids[i] + "\n"; } console.log("Service found: " + services); });
-
readonly
BluetoothLESolicitationUUID[]
solicitationuuids [nullable]The list of service solicitation UUIDs available on Bluetooth LE device from the scan result information.
Since: 2.3.1
Remark: This value will be set to null, if the object is obtained from BluetoothLEConnectChangeCallback.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { var uuids = device.solicitationuuids; var services = ""; for (var i = 0; i < uuids.length; i++) { services += uuids[i] + "\n"; } console.log("Service solicitations found: " + services); });
-
readonly
BluetoothLEServiceData[]
serviceData [nullable]The list of service data available on Bluetooth LE device from the scan result information.
Since: 2.3.1
Remark: On devices prior to Tizen 6.0, service data is found only when its BluetoothLEServiceData::uuid is 16-bit. Finding service data with 128-bit BluetoothLEServiceData::uuid is supported since Tizen 6.0.
Remark: This value will be set to null, if the object is obtained from BluetoothLEConnectChangeCallback.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { var serviceData = device.serviceData; var data = ""; for (var i = 0; i < serviceData.length; i++) { data += serviceData[i].id + serviceData[i].data + "\n"; } console.log("Service data found: " + data); });
-
readonly
BluetoothLEManufacturerData manufacturerData [nullable]The manufacturer data from the scan result information.
Since: 2.3.1
Remark: This value will be set to null, if the object is obtained from BluetoothLEConnectChangeCallback.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); /* On an advertising device:. */ var advertiseOptions = { manufacturerData: new tizen.BluetoothLEManufacturerData("127", "0xDeadc0dE") }; var advertiseData = new tizen.BluetoothLEAdvertiseData(advertiseOptions); adapter.startAdvertise(advertiseData, "ADVERTISE", function onstate(state) { console.log("Advertiser state: " + state); }, function(e) { console.log("Failed to startAdvertise : " + e.message); }, "LOW_LATENCY"); /* On scanning device:. */ adapter.startScan(function onsuccess(device) { var manufacturerData = device.manufacturerData; console.log("Found device, manufacturerData: " + JSON.stringify(device.manufacturerData)); });
Output example:
Advertiser state: STARTED Found device, manufacturerData: {"id":"127","data":"DEADC0DE"}
-
readonly
long rssi [nullable]The received signal strength indicator in dBm (decibel-milliwatts) units.
The signal strength depends on distance (between the device and the beacon) and broadcasting power value.
Since: 3.0
Remark: Since Tizen 6.0, this value can be a null, but only if the object is obtained from BluetoothLEConnectChangeCallback.
Code example:
var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { console.log("Found device: " + device.name); console.log("RSSI: " + device.rssi); });
Output example:
Found device: beacon RSSI: -25
Methods
-
connect
-
Establishes Low Energy connection to the device.
void connect(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
Connection is required to readValue() and writeValue() from the remote device.
The ErrorCallback is launched with these error types:
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Remark: Establishing a connection can make device's Bluetooth stack busy. With the result, some of the operations, such as BluetoothLEAdapter::stopScan() can fail until connect()'s callback such as successCallback() or errorCallback() is triggered.
Parameters:
- successCallback [optional] [nullable]: Callback function that is called when the connection is established successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
function onerror(e) { console.log("Failed to connect to device: " + e.message); } function onconnected() { console.log("Connected to device"); } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); device.connect(onconnected, onerror); } });
-
disconnect
-
Disconnects from the device.
void disconnect(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
The ErrorCallback is launched with these error types:
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- successCallback [optional] [nullable]: Callback function that is called when the connection is finished successfully.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type InvalidStateError, if device is currently not connected
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
function onerror(e) { console.log("Error occurred: " + e.message); } function onDeviceFound(device) { function ondisconnect() { console.log("Disconnected"); } function onconnected() { console.log("Connected to device"); device.disconnect(ondisconnect, onerror); } if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); device.connect(onconnected, onerror); } } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(onDeviceFound, onerror);
-
isConnected
-
Checks if Bluetooth Low Energy device is currently connected.
boolean isConnected();
Since: 6.0
Return value:
-
boolean:
true if the device is currently connected, false otherwise.
Exceptions:
- WebAPIException
with error type UnknownError, if any error occurs.
Code example:
var dev; function onerror(e) { console.log("Failed to connect to device: " + e.message); } function onconnected() { console.log("Connected to device: " + dev.isConnected()); } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { adapter.stopScan(); dev = device; var connected = dev.isConnected(); console.log("Found device: " + device.name + ", connected: " + connected); if (!connected) { device.connect(onconnected, onerror); } } });
Output example:
Found device: TestDevice, connected: false Connected to device: true
- WebAPIException
-
getService
-
Retrieves a service from the device for the given UUID.
BluetoothGATTService getService(BluetoothUUID uuid);
Since: 2.3.1
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- uuid: UUID of the service.
Return value:
-
BluetoothGATTService:
Retrieved service for the given UUID.
Exceptions:
- WebAPIException
with error type NotFoundError, if there is no service with the given UUID.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type InvalidStateError, if the GATT service is not available.
with error type UnknownError, if any other error occurs.
Code example:
function onconnected(device) { console.log("Connected to device"); var service = device.getService(device.uuids[0]); console.log("Service got"); } function onerror(e) { console.log("Error occurred: " + e.message); } function onDeviceFound(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); device.connect(onconnected.bind(null, device), onerror); } } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(onDeviceFound, onerror);
-
getServiceAllUuids
-
Retrieves list of all service UUIDs from connected GATT server.
BluetoothUUID[] getServiceAllUuids();
Since: 3.0
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Return value:
-
BluetoothUUID[]:
The array of all service UUIDs that belong to the connected GATT server.
Exceptions:
- WebAPIException
with error type InvalidValuesError, if GATT server is not available.
with error type NotSupportedError, if the feature is not supported.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
/* Below variable should represent valid address of discoverable bluetooth low energy device. */ var remoteAddress = "11:22:33:44:55:66"; function onconnected(device) { console.log("Connected to device"); var services = device.getServiceAllUuids(); console.log("Services length " + services.length); } function onerror(e) { console.log("Error occurred: " + e.message); } function onDeviceFound(device) { if (device.address == remoteAddress) { device.connect(onconnected.bind(null, device), onerror); } } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(onDeviceFound, onerror);
Output example:
Connected to device Services length 2
- WebAPIException
-
addConnectStateChangeListener
-
Registers a listener to be called when the device connects or disconnects.
long addConnectStateChangeListener(BluetoothLEConnectChangeCallback listener);
Since: 2.3.1
Parameters:
- listener: Listener functions that are called when the connection state changes.
Return value:
-
long:
The watchID to be used to unregister the listener.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
Code example:
function onerror(e) { console.log("Error occurred: " + e.message); } function onDeviceFound(device) { var onConnectionStateChange = { onconnected: function(device) { console.log("Device " + device.name + " connected"); }, ondisconnected: function(device) { console.log("Device " + device.name + " disconnected"); } }; if (device.address === "11:22:33:44:55:66") { console.log("Found device: " + device.name); device.addConnectStateChangeListener(onConnectionStateChange); device.connect(); } } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(onDeviceFound, onerror);
-
removeConnectStateChangeListener
-
Unregisters a Bluetooth device connection listener.
void removeConnectStateChangeListener(long watchID);
Since: 2.3.1
Calling this function has no effect if there is no listener with given id.
Parameters:
- watchID: The watchID identifier returned by the addConnectStateChangeListener() method.
Code example:
function onerror(e) { console.log("Error occurred: " + e.message); } function onDeviceFound(device) { var onConnectionStateChange = { onconnected: function(device) { console.log("Device " + device.name + " connected"); }, ondisconnected: function(device) { console.log("Device " + device.name + " disconnected"); device.removeConnectStateChangeListener(listenerID); } }; if (device.address === "11:22:33:44:55:66") { console.log("Found device: " + device.name); listenerID = device.addConnectStateChangeListener(onConnectionStateChange); device.connect(); } } var adapter = tizen.bluetooth.getLEAdapter(); var listenerID = null; adapter.startScan(onDeviceFound, onerror);
-
getAttMtu
-
Gets the current value of Attribute Protocol(ATT) Maximum Transmission Unit(MTU) from the connected device.
unsigned long getAttMtu();
Since: 6.0
Return value:
-
unsigned long:
Current ATT MTU value.
Exceptions:
- WebAPIException
with error type InvalidStateError, if the remote device is not connected.
with error type UnknownError, if any other error occurs.
Code example:
var dev; function onerror(e) { console.log("Failed to connect to device: " + e.message); } function onconnected() { console.log("Connected to device, ATT MTU: " + dev.getAttMtu()); } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { dev = device; console.log("Found device: " + device.name); device.connect(onconnected, onerror); } });
Output example:
Found device: TestDevice Connected to device, ATT MTU: 23
- WebAPIException
-
requestAttMtuChange
-
Requests the GATT server to change the Attribute Protocol (ATT) Maximum Transmission Unit (MTU) value.
void requestAttMtuChange(unsigned long newAttMtu);
Since: 6.0
Remark: ATT MTU value is determined between two connected devices and change will be successful only if both devices support the given value of ATT MTU.
Parameters:
- newAttMtu: The new ATT MTU value, that will be sent to GATT server.
Exceptions:
- WebAPIException
with error type UnknownError, if any error occurs.
Code example:
function proccessDevice(device) { function onConnected() { var attMtu = device.getAttMtu(); console.log("Initial ATT MTU value: " + attMtu); watchID = device.addAttMtuChangeListener(function(value) { console.log("ATT MTU changed to: " + value); device.removeAttMtuChangeListener(watchID); device.disconnect(); }); device.requestAttMtuChange(64); } device.connect(onConnected); } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); adapter.stopScan(); proccessDevice(device); } });
Output example:
Found device: TestDevice Initial ATT MTU value: 31 ATT MTU changed to: 64
-
addAttMtuChangeListener
-
Registers a listener to be called when ATT MTU value is changed.
long addAttMtuChangeListener(ConnectionMtuCallback callback);
Since: 6.0
Remark: ATT MTU value is determined between two connected devices and change takes place after both devices agrees to new value, both connected devices can initiate the ATT MTU value change by sending the request.
Parameters:
- callback: Listener function that is called when the connection's ATT MTU changes.
Return value:
-
long:
The watchID to be used to unregister the listener.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if an input attribute is not compatible with the expected type for this attribute.
with error type UnknownError, if any other error occurs.
Code example:
function proccessDevice(device) { function onConnected() { var attMtu = device.getAttMtu(); console.log("Initial ATT MTU value: " + attMtu); watchID = device.addAttMtuChangeListener(function(value) { console.log("ATT MTU changed to: " + value); device.removeAttMtuChangeListener(watchID); device.disconnect(); }); device.requestAttMtuChange(64); } device.connect(onConnected); } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); adapter.stopScan(); proccessDevice(device); } });
Output example:
Found device: TestDevice Initial ATT MTU value: 31 ATT MTU changed to: 64
-
removeAttMtuChangeListener
-
Unregisters the ATT MTU value change listener.
void removeAttMtuChangeListener(long watchId);
Since: 6.0
Parameters:
- watchId: The watchID identifier returned by the addAttMtuChangeListener() method.
Exceptions:
- WebAPIException
with error type UnknownError, if any error occurs.
Code example:
function proccessDevice(device) { function onConnected() { var attMtu = device.getAttMtu(); console.log("Initial ATT MTU value: " + attMtu); watchID = device.addAttMtuChangeListener(function(value) { console.log("ATT MTU changed to: " + value); device.removeAttMtuChangeListener(watchID); device.disconnect(); }); device.requestAttMtuChange(64); } device.connect(onConnected); } var adapter = tizen.bluetooth.getLEAdapter(); adapter.startScan(function onsuccess(device) { if (device.address == "11:22:33:44:55:66") { console.log("Found device: " + device.name); adapter.stopScan(); proccessDevice(device); } });
Output example:
Found device: TestDevice Initial ATT MTU value: 31 ATT MTU changed to: 64
2.30. BluetoothSocket
[NoInterfaceObject] interface BluetoothSocket { readonly attribute BluetoothUUID uuid; readonly attribute BluetoothSocketState state; readonly attribute BluetoothDevice peer; [TreatNonCallableAsNull] attribute SuccessCallback? onmessage raises(WebAPIException); [TreatNonCallableAsNull] attribute SuccessCallback? onclose raises(WebAPIException); unsigned long writeData(Bytes data) raises(WebAPIException); byte[] readData() raises(WebAPIException); void close() raises(WebAPIException); };
Since: 2.3.1
The socket object is created by BluetoothDevice.connectToServiceByUUID() or BluetoothAdapter.registerRFCOMMServiceByUUID().
Attributes
-
readonly
BluetoothUUID uuidThe service UUID to which this socket is connected.
Since: 2.3.1
-
readonly
BluetoothSocketState stateThe socket state.
Since: 2.3.1
-
readonly
BluetoothDevice peerThe peer device to which this socket is connected.
Since: 2.3.1
-
SuccessCallback onmessage [nullable]Called when an incoming message is received successfully from the peer. By default, this attribute is set to null.
Since: 2.3.1
Exceptions:
- WebAPIException
with error type TypeMismatchError, if any input attribute is not compatible with the expected type for this attribute.
- WebAPIException
-
SuccessCallback onclose [nullable]Called when the socket is closed successfully. By default, this attribute is set to null.
Since: 2.3.1
Exceptions:
- WebAPIException
with error type TypeMismatchError, if any input attribute is not compatible with the expected type for this attribute.
- WebAPIException
Methods
-
writeData
-
Writes data as a sequence of bytes onto the socket and returns the number of bytes actually written.
unsigned long writeData(Bytes data);
Since: 2.3.1
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- data: The data to send.
Return value:
-
unsigned long:
The number of bytes actually sent.
Exceptions:
- WebAPIException
with error type TypeMismatchError, if any input parameters in not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type UnknownError, if any other error occurs.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); /* Purpose of code below is to enable Bluetooth on the device. */ var bluetoothSwitchAppControl = new tizen.ApplicationControl( "http://tizen.org/appcontrol/operation/edit", null, "application/x-bluetooth-on-off"); function launchSuccess() { console.log("Bluetooth Settings application is successfully launched"); } function launchError(error) { alert("An error occurred: " + error.name + ". Please enable Bluetooth through the Settings application"); } var serviceReply = { /* Called when the launched application reports success. */ onsuccess: function(data) { if (adapter.powered) { console.log("Bluetooth is successfully turned on"); adapter.getDevice("35:F4:59:D1:7A:03", onDeviceReady, function(e) { console.log("Error: " + e.message); }); } else { console.log("Bluetooth is still switched off"); } }, /* Called when launched application reports failure. */ onfailure: function() { alert("Bluetooth Settings application reported failure"); } }; /* writeData sample code. */ function onSocketConnected(socket) { console.log("Opened connection to remote device"); socket.onmessage = function() { console.log("Message received: " + socket.readData()); }; socket.onclose = function() { console.log("Socket closed with " + socket.peer.name); }; /* Sends data to peer. */ var textmsg = "Test"; var sendtextmsg = new Array(); for (var i = 0; i < textmsg.length; i++) { sendtextmsg[i] = textmsg.charCodeAt(i); } socket.writeData(sendtextmsg); } function onSocketError(e) { console.log("Error connecting to service. Reason: " + e.message); } function onDeviceReady(device) { /* Validates device and service uuid. */ if (device.uuids.indexOf("5BCE9431-6C75-32AB-AFE0-2EC108A30860") != -1) { /* Opens socket. */ device.connectToServiceByUUID( "5BCE9431-6C75-32AB-AFE0-2EC108A30860", onSocketConnected, onSocketError); } } /* Execution. */ if (adapter.powered) { console.log("Bluetooth is already enabled"); adapter.getDevice("35:F4:59:D1:7A:03", onDeviceReady, function(e) { console.log("Error: " + e.message); }); } else { console.log("Try to launch the Bluetooth Settings application"); tizen.application.launchAppControl( bluetoothSwitchAppControl, null, launchSuccess, launchError, serviceReply); }
-
readData
-
Reads data from the socket.
byte[] readData();
Since: 2.3.1
This method should be called only in the BluetoothSocket.onmessage handler, that is, when data is ready on the socket.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Return value:
-
byte[]:
The sequence of bytes successfully read.
Exceptions:
- WebAPIException
with error type SecurityError, if the application does not have the privilege to call this method.
with error type UnknownError, if any other error occurs.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); /* Purpose of code below is to enable Bluetooth on the device. */ var bluetoothSwitchAppControl = new tizen.ApplicationControl( "http://tizen.org/appcontrol/operation/edit", null, "application/x-bluetooth-on-off"); function launchSuccess() { console.log("Bluetooth Settings application is successfully launched"); } function launchError(error) { alert("An error occurred: " + error.name + ". Please enable Bluetooth through the Settings application"); } var serviceReply = { /* Called when the launched application reports success. */ onsuccess: function(data) { if (adapter.powered) { console.log("Bluetooth is successfully turned on"); adapter.getDevice("35:F4:59:D1:7A:03", onDeviceReady, function(e) { console.log("Error: " + e.message); }); } else { console.log("Bluetooth is still switched off"); } }, /* Called when launched application reports failure. */ onfailure: function() { alert("Bluetooth Settings application reported failure"); } }; /* readData sample code. */ function onError(e) { console.log("Error connecting to service. Reason: " + e.message); } function onSocketConnected(socket) { console.log("Opening socket success!!!"); socket.onmessage = function() { /* Gets a message from peer, reads it. */ var data = socket.readData(); /* Code to evaluate message goes here. */ }; socket.onclose = function() { console.log("Socket closed with " + socket.peer.name); }; } function onDeviceReady(device) { /* Validates device and service uuid. */ if (device.uuids.indexOf("5BCE9431-6C75-32AB-AFE0-2EC108A30860") != -1) { /* Opens socket. */ device.connectToServiceByUUID( "5BCE9431-6C75-32AB-AFE0-2EC108A30860", onSocketConnected, onError); } } /* Execution. */ if (adapter.powered) { console.log("Bluetooth is already enabled"); adapter.getDevice("35:F4:59:D1:7A:03", onDeviceReady, function(e) { console.log("Error: " + e.message); }); } else { console.log("Try to launch the Bluetooth Settings application"); tizen.application.launchAppControl( bluetoothSwitchAppControl, null, launchSuccess, launchError, serviceReply); }
- WebAPIException
-
close
-
Closes the socket.
void close();
Since: 2.3.1
BluetoothSocket.state changes to CLOSED, and BluetoothSocket.onclose() is invoked on success.
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Exceptions:
- WebAPIException
with error type SecurityError, if the application does not have the privilege to call this method.
with error type UnknownError, if any other error occurs.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); /* Purpose of code below is to enable Bluetooth on the device. */ var bluetoothSwitchAppControl = new tizen.ApplicationControl( "http://tizen.org/appcontrol/operation/edit", null, "application/x-bluetooth-on-off"); function launchSuccess() { console.log("Bluetooth Settings application is successfully launched"); } function launchError(error) { alert("An error occurred: " + error.name + ". Please enable Bluetooth through the Settings application"); } var serviceReply = { /* Called when the launched application reports success. */ onsuccess: function(data) { if (adapter.powered) { console.log("Bluetooth is successfully turned on"); startDiscovery(); } else { console.log("Bluetooth is still switched off"); } }, /* Called when launched application reports failure. */ onfailure: function() { alert("Bluetooth Settings application reported failure"); } }; function onSocketConnected(socket) { console.log("Opened connection to remote device " + socket.peer.name); socket.onclose = function() { console.log("Socket closed with " + socket.peer.name); }; socket.close(); } function onSocketError(e) { console.log("Error connecting to service. Reason: " + e.message); } function onDeviceReady(device) { /* Validates device and service uuid. */ if (device.uuids.indexOf("5BCE9431-6C75-32AB-AFE0-2EC108A30860") != -1) { device.connectToServiceByUUID( "5BCE9431-6C75-32AB-AFE0-2EC108A30860", onSocketConnected, onSocketError); } } if (adapter.powered) { /* Gets the BluetoothDevice object. */ adapter.getDevice("35:F4:59:D1:7A:03", onDeviceReady, function(e) { console.log("Error: " + e.message); }); } else { console.log("Try to launch the Bluetooth Settings application"); tizen.application.launchAppControl( bluetoothSwitchAppControl, null, launchSuccess, launchError, serviceReply); }
- WebAPIException
2.31. BluetoothClass
[NoInterfaceObject] interface BluetoothClass { readonly attribute octet major; readonly attribute octet minor; readonly attribute unsigned short[] services; boolean hasService(unsigned short service) raises(WebAPIException); };
Since: 2.3.1
Bluetooth device class describes the characteristics and capabilities of a device.
Bluetooth CoD is a 24-bit integer created by the union of three components:
- Exactly one Major Device Class (bits 8-12 of CoD) - This is the highest level of granularity for defining a Bluetooth Device.
- Exactly one Minor Device Class (bits 2-7 of CoD) - This is to be interpreted only in the context of the Major Device Class. Thus, the meaning of these bits may change, depending on the value of "Major Device Class".
- Zero or more Major Service Classes (bits 13-23) - Represents the services supported by the device.
The Major and Minor classes are intended to define a general family of devices with which any particular implementation wishes to be associated. No assumptions should be made about specific functionality or characteristics of any application, based solely on the assignment of a Major or minor device class.
Attributes
-
readonly
octet majorThe major device class.
The BluetoothClassDeviceMajor interface contains the list of known values.
Since: 2.3.1
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); function evaluateDevice(address) { adapter.getDevice(address, function(device) { if (device.deviceClass.major == tizen.bluetooth.deviceMajor.COMPUTER) { /* Shows computer icon for this device. */ console.log("Device is computer"); } else if (device.deviceClass.major == tizen.bluetooth.deviceMajor.PHONE) { /* Shows phone icon. */ console.log("Device is a Phone"); } }, function(e) { console.log("Couldn't get any device with the given address: " + e.message); }); } evaluateDevice("11:22:33:44:55:66");
-
readonly
octet minorThe minor device class.
The BluetoothClassDeviceMinor interface contains the list of known values.
Since: 2.3.1
-
readonly
unsigned short[]
servicesThe services provided by this device and it refers to the BluetoothClassDeviceService interface for the list of possible values.
Since: 2.3.1
Methods
-
hasService
-
Checks whether the given service exists in the services.
boolean hasService(unsigned short service);
Since: 2.3.1
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- service: Service to check.
Return value:
-
boolean:
true, if given service exists in the services.
Exceptions:
- WebAPIException
with error type InvalidValuesError, if any of the input parameters contain an invalid value.
with error type SecurityError, if the application does not have the privilege to call this method.
with error type UnknownError, if any other error occurs.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); adapter.getDevice("12:34:56:78:9A:BC", function(device) { if (device.deviceClass.hasService(tizen.bluetooth.deviceService.POSITIONING)) { console.log("Device supports Positioning service"); } }, function(e) { console.log("Couldn't get device for given address: " + e.message); });
2.32. BluetoothClassDeviceMajor
[NoInterfaceObject] interface BluetoothClassDeviceMajor { const octet MISC = 0x00; const octet COMPUTER = 0x01; const octet PHONE = 0x02; const octet NETWORK = 0x03; const octet AUDIO_VIDEO = 0x04; const octet PERIPHERAL = 0x05; const octet IMAGING = 0x06; const octet WEARABLE = 0x07; const octet TOY = 0x08; const octet HEALTH = 0x09; const octet UNCATEGORIZED = 0x1F; };
Since: 2.3.1
2.33. BluetoothClassDeviceMinor
[NoInterfaceObject] interface BluetoothClassDeviceMinor { const octet COMPUTER_UNCATEGORIZED = 0x00; const octet COMPUTER_DESKTOP = 0x01; const octet COMPUTER_SERVER = 0x02; const octet COMPUTER_LAPTOP = 0x03; const octet COMPUTER_HANDHELD_PC_OR_PDA = 0x04; const octet COMPUTER_PALM_PC_OR_PDA = 0x05; const octet COMPUTER_WEARABLE = 0x06; const octet PHONE_UNCATEGORIZED = 0x00; const octet PHONE_CELLULAR = 0x01; const octet PHONE_CORDLESS = 0x02; const octet PHONE_SMARTPHONE = 0x03; const octet PHONE_MODEM_OR_GATEWAY = 0x04; const octet PHONE_ISDN = 0x05; const octet AV_UNRECOGNIZED = 0x00; const octet AV_WEARABLE_HEADSET = 0x01; const octet AV_HANDSFREE = 0x02; const octet AV_MICROPHONE = 0x04; const octet AV_LOUDSPEAKER = 0x05; const octet AV_HEADPHONES = 0x06; const octet AV_PORTABLE_AUDIO = 0x07; const octet AV_CAR_AUDIO = 0x08; const octet AV_SETTOP_BOX = 0x09; const octet AV_HIFI = 0x0a; const octet AV_VCR = 0x0b; const octet AV_VIDEO_CAMERA = 0x0c; const octet AV_CAMCORDER = 0x0d; const octet AV_MONITOR = 0x0e; const octet AV_DISPLAY_AND_LOUDSPEAKER = 0x0f; const octet AV_VIDEO_CONFERENCING = 0x10; const octet AV_GAMING_TOY = 0x12; const octet PERIPHERAL_UNCATEGORIZED = 0; const octet PERIPHERAL_KEYBOARD = 0x10; const octet PERIPHERAL_POINTING_DEVICE = 0x20; const octet PERIPHERAL_KEYBOARD_AND_POINTING_DEVICE = 0x30; const octet PERIPHERAL_JOYSTICK = 0x01; const octet PERIPHERAL_GAMEPAD = 0x02; const octet PERIPHERAL_REMOTE_CONTROL = 0x03; const octet PERIPHERAL_SENSING_DEVICE = 0x04; const octet PERIPHERAL_DEGITIZER_TABLET = 0x05; const octet PERIPHERAL_CARD_READER = 0x06; const octet PERIPHERAL_DIGITAL_PEN = 0x07; const octet PERIPHERAL_HANDHELD_SCANNER = 0x08; const octet PERIPHERAL_HANDHELD_INPUT_DEVICE = 0x09; const octet IMAGING_UNCATEGORIZED = 0x00; const octet IMAGING_DISPLAY = 0x04; const octet IMAGING_CAMERA = 0x08; const octet IMAGING_SCANNER = 0x10; const octet IMAGING_PRINTER = 0x20; const octet WEARABLE_WRITST_WATCH = 0x01; const octet WEARABLE_PAGER = 0x02; const octet WEARABLE_JACKET = 0x03; const octet WEARABLE_HELMET = 0x04; const octet WEARABLE_GLASSES = 0x05; const octet TOY_ROBOT = 0x01; const octet TOY_VEHICLE = 0x02; const octet TOY_DOLL = 0x03; const octet TOY_CONTROLLER = 0x04; const octet TOY_GAME = 0x05; const octet HEALTH_UNDEFINED = 0x00; const octet HEALTH_BLOOD_PRESSURE_MONITOR = 0x01; const octet HEALTH_THERMOMETER = 0x02; const octet HEALTH_WEIGHING_SCALE = 0x03; const octet HEALTH_GLUCOSE_METER = 0x04; const octet HEALTH_PULSE_OXIMETER = 0x05; const octet HEALTH_PULSE_RATE_MONITOR = 0x06; const octet HEALTH_DATA_DISPLAY = 0x07; const octet HEALTH_STEP_COUNTER = 0x08; const octet HEALTH_BODY_COMPOSITION_ANALYZER = 0x09; const octet HEALTH_PEAK_FLOW_MONITOR = 0x0a; const octet HEALTH_MEDICATION_MONITOR = 0x0b; const octet HEALTH_KNEE_PROSTHESIS = 0x0c; const octet HEALTH_ANKLE_PROSTHESIS = 0x0d; };
Since: 2.3.1
2.34. BluetoothClassDeviceService
[NoInterfaceObject] interface BluetoothClassDeviceService { const unsigned short LIMITED_DISCOVERABILITY = 0x0001; const unsigned short POSITIONING = 0x0008; const unsigned short NETWORKING = 0x0010; const unsigned short RENDERING = 0x0020; const unsigned short CAPTURING = 0x0040; const unsigned short OBJECT_TRANSFER = 0x0080; const unsigned short AUDIO = 0x0100; const unsigned short TELEPHONY = 0x0200; const unsigned short INFORMATION = 0x0400; };
Since: 2.3.1
2.35. BluetoothServiceHandler
[NoInterfaceObject] interface BluetoothServiceHandler { readonly attribute BluetoothUUID uuid; readonly attribute DOMString name; readonly attribute boolean isConnected; [TreatNonCallableAsNull] attribute BluetoothSocketSuccessCallback? onconnect raises(WebAPIException); void unregister(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); };
Since: 2.3.1
Attributes
-
readonly
BluetoothUUID uuidThe UUID of the service. See example.
Since: 2.3.1
-
readonly
DOMString nameThe name of the service. See example.
Since: 2.3.1
-
readonly
boolean isConnectedThe flag indicating whether any remote devices is using this service. See example.
Since: 2.3.1
-
BluetoothSocketSuccessCallback onconnect [nullable]Called when a remote device is connected successfully to this service. By default, this attribute is set to null.
Since: 2.3.1
Exceptions:
- WebAPIException
with error type TypeMismatchError, if any input attribute is not compatible with the expected type for this attribute.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); function chatServiceSuccessCb(handler) { console.log("Chat service " + handler.name + " with UUID " + handler.uuid + " is successfully registered!"); console.log("There is " + (handler.isConnected ? "a" : "no") + " device using this service"); handler.onconnect = function(socket) { console.log("Client is connected: " + socket.peer.name + "," + socket.peer.address); socket.onmessage = function() { var data = socket.readData(); /* Handle message code goes here. */ }; /* Expected close. */ socket.onclose = function() { console.log("The socket is closed"); }; }; } function errorCb(e) { console.log("Could not register service record, Error: " + e.message); } var CHAT_SERVICE_UUID = "5BCE9431-6C75-32AB-AFE0-2EC108A30860"; adapter.registerRFCOMMServiceByUUID( CHAT_SERVICE_UUID, "Chat service", chatServiceSuccessCb, errorCb);
- WebAPIException
Methods
-
unregister
-
Unregisters a service record from the Bluetooth services record database and stops listening for new connections to this service.
void unregister(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback);
Since: 2.3.1
The ErrorCallback is launched with these error types:
- UnknownError - If any other error occurs
Privilege level: public
Privilege: http://tizen.org/privilege/bluetooth
Parameters:
- successCallback [optional] [nullable]: Callback function that is called when the record is removed successfully from the service records database.
- errorCallback [optional] [nullable]: Callback function that is called in case of failure (to unregister).
Exceptions:
- WebAPIException
with error type TypeMismatchError, if the input parameter is not compatible with the expected type for that parameter.
with error type SecurityError, if the application does not have the privilege to call this method.
Code example:
var adapter = tizen.bluetooth.getDefaultAdapter(); var chatServiceHandler = null; function chatServiceSuccessCb(handler) { console.log("Chat service registration was successful!"); chatServiceHandler = handler; handler.onconnect = function(socket) { console.log("Client is connected: " + socket.peer.name + "," + socket.peer.address); socket.onmessage = function() { var data = socket.readData(); /* Handle message code goes here. */ }; /* Expected close. */ socket.onclose = function() { console.log("The socket is closed"); }; }; } function publishChatService() { var CHAT_SERVICE_UUID = "5BCE9431-6C75-32AB-AFE0-2EC108A30860"; adapter.registerRFCOMMServiceByUUID(CHAT_SERVICE_UUID, "Chat service", chatServiceSuccessCb, /* Error handler. */ function(e) { console.log("Could not register service record, Error: " + e.message); }); } function unRegisterChatService() { if (chatServiceHandler != null) { chatServiceHandler.unregister( function() { chatServiceHandler = null; console.log("Chat service is unregistered"); }, function(e) { console.log("Error: " + e.message); }); } }
2.36. BluetoothAdapterChangeCallback
[Callback, NoInterfaceObject] interface BluetoothAdapterChangeCallback { void onstatechanged(boolean powered); void onnamechanged(DOMString name); void onvisibilitychanged(boolean visible); };
Since: 2.3.1
Remark: Example of using can be find at setChangeListener code example.
Methods
-
onstatechanged
-
Called when the power state is changed.
void onstatechanged(boolean powered);
Since: 2.3.1
Parameters:
- powered: Flag indicating power state of local Bluetooth: true means power-on, false means power-off.
-
onnamechanged
-
Called when the name is changed.
void onnamechanged(DOMString name);
Since: 2.3.1
Parameters:
- name: Name of local Bluetooth.
-
onvisibilitychanged
-
Called when the visibility is changed.
void onvisibilitychanged(boolean visible);
Since: 2.3.1
Parameters:
- visible: Flag indicating visibility of local Bluetooth: true means that local Bluetooth is discoverable, false means that local Bluetooth is hidden from other devices.
2.37. BluetoothDeviceSuccessCallback
[Callback=FunctionOnly, NoInterfaceObject] interface BluetoothDeviceSuccessCallback { void onsuccess(BluetoothDevice device); };
Since: 2.3.1
Remark: Example of using can be find at getDevice and createBonding code examples.
Methods
-
onsuccess
-
Called on success.
void onsuccess(BluetoothDevice device);
Since: 2.3.1
Parameters:
- device: BluetoothDevice object.
2.38. BluetoothDeviceArraySuccessCallback
[Callback=FunctionOnly, NoInterfaceObject] interface BluetoothDeviceArraySuccessCallback { void onsuccess(BluetoothDevice[] devices); };
Since: 2.3.1
Remark: Example of using can be find at getKnownDevices code example.
Methods
-
onsuccess
-
Called when device information is ready.
void onsuccess(BluetoothDevice[] devices);
Since: 2.3.1
Parameters:
- devices: List of devices known to local Bluetooth adapter. Each element is a BluetoothDevice.
2.39. BluetoothDiscoverDevicesSuccessCallback
[Callback, NoInterfaceObject] interface BluetoothDiscoverDevicesSuccessCallback { void onstarted(); void ondevicefound(BluetoothDevice device); void ondevicedisappeared(BluetoothAddress address); void onfinished(BluetoothDevice[] foundDevices); };
Since: 2.3.1
Remark: Example of using can be find at discoverDevices code example.
Methods
-
onstarted
-
Called at the beginning of a device discovery process for finding the nearby Bluetooth device.
void onstarted();
Since: 2.3.1
-
ondevicefound
-
Called when a new device is discovered in the process of inquiry/discovery.
void ondevicefound(BluetoothDevice device);
Since: 2.3.1
Parameters:
- device: Device that is found.
-
ondevicedisappeared
-
Called when a device is lost from proximity. After that, this device is no longer visible.
void ondevicedisappeared(BluetoothAddress address);
Since: 2.3.1
Parameters:
- address: Address of the device that is no longer in range or visible.
-
onfinished
-
Called when the device discovery process has finished.
void onfinished(BluetoothDevice[] foundDevices);
Since: 2.3.1
Parameters:
- foundDevices: Array of devices found in this discovery session.
2.40. BluetoothSocketSuccessCallback
[Callback=FunctionOnly, NoInterfaceObject] interface BluetoothSocketSuccessCallback { void onsuccess(BluetoothSocket socket); };
Since: 2.3.1
Remark: Example of using can be find at connectToServiceByUUID code example.
Methods
-
onsuccess
-
Called when the connection to a service is ready.
void onsuccess(BluetoothSocket socket);
Since: 2.3.1
Parameters:
- socket: Socket to connect to the specified service on a remote device.
2.41. BluetoothServiceSuccessCallback
[Callback=FunctionOnly, NoInterfaceObject] interface BluetoothServiceSuccessCallback { void onsuccess(BluetoothServiceHandler handler); };
Since: 2.3.1
Remark: Example of using can be find at registerRFCOMMServiceByUUID code example.
Methods
-
onsuccess
-
Called when registering a service with the local device is successful.
void onsuccess(BluetoothServiceHandler handler);
Since: 2.3.1
Parameters:
- handler: Bluetooth service handler.
3. Related Feature
To guarantee that the Bluetooth application runs on a device with Bluetooth feature, declare the following feature requirements in the config file:
To guarantee that the Bluetooth healthcare application runs on a device with Bluetooth health profile feature, declare the following feature requirements in the config file:
To guarantee that the Bluetooth Low Energy application runs on a device with Bluetooth Low Energy feature, declare the following feature requirements in the config file:
To guarantee that the Bluetooth Low Energy application runs on a device with Bluetooth Low Energy GATT Client feature, declare the following feature requirements in the config file:
To guarantee that the Bluetooth Low Energy application runs on a device with Bluetooth Low Energy GATT Server feature, declare the following feature requirements in the config file:
4. Full WebIDL
module Bluetooth { typedef DOMString BluetoothAddress; typedef DOMString BluetoothUUID; typedef DOMString BluetoothLESolicitationUUID; typedef (byte[] or DOMString or Uint8Array) Bytes; typedef (BluetoothGATTService or BluetoothGATTServerService) BluetoothGATTServiceVariant; typedef (BluetoothGATTCharacteristic or BluetoothGATTServerCharacteristic) BluetoothGATTCharacteristicVariant; typedef (BluetoothGATTDescriptor or BluetoothGATTServerDescriptor) BluetoothGATTDescriptorVariant; enum BluetoothSocketState { "CLOSED", "OPEN" }; enum BluetoothAdvertisePacketType { "ADVERTISE", "SCAN_RESPONSE" }; enum BluetoothAdvertisingState { "STARTED", "STOPPED" }; enum BluetoothAdvertisingMode { "BALANCED", "LOW_LATENCY", "LOW_ENERGY" }; dictionary BluetoothLEAdvertiseDataInit { boolean? includeName; BluetoothUUID[]? uuids; BluetoothLESolicitationUUID[]? solicitationuuids; unsigned long? appearance; boolean? includeTxPowerLevel; BluetoothLEServiceData[]? servicesData; BluetoothLEManufacturerData? manufacturerData; }; dictionary BluetoothGATTServerServiceInit { BluetoothUUID serviceUuid; boolean isPrimary = true; BluetoothGATTServerServiceInit[]? includedServices = null; BluetoothGATTServerCharacteristicInit[]? characteristics = null; }; dictionary BluetoothGATTServerCharacteristicInit { BluetoothUUID uuid; BluetoothGATTServerDescriptorInit[]? descriptors = null; boolean isBroadcast = false; boolean hasExtendedProperties = false; boolean isNotify = false; boolean isIndication = false; boolean isReadable = false; boolean isSignedWrite = false; boolean isWritable = false; boolean isWriteNoResponse = false; boolean readPermission = false; boolean writePermission = false; boolean encryptedReadPermission = false; boolean encryptedWritePermission = false; boolean encryptedSignedReadPermission = false; boolean encryptedSignedWritePermission = false; ReadValueRequestCallback? readValueRequestCallback = null; SuccessCallback? readValueSendResponseSuccessCallback = null; ErrorCallback? readValueSendResponseErrorCallback = null; WriteValueRequestCallback? writeValueRequestCallback = null; SuccessCallback? writeValueSendResponseSuccessCallback = null; ErrorCallback? writeValueSendResponseErrorCallback = null; }; dictionary BluetoothGATTServerDescriptorInit { BluetoothUUID uuid; boolean readPermission = false; boolean writePermission = false; boolean encryptedReadPermission = false; boolean encryptedWritePermission = false; boolean encryptedSignedReadPermission = false; boolean encryptedSignedWritePermission = false; ReadValueRequestCallback? readValueRequestCallback = null; SuccessCallback? readValueSendResponseSuccessCallback = null; ErrorCallback? readValueSendResponseErrorCallback = null; WriteValueRequestCallback? writeValueRequestCallback = null; SuccessCallback? writeValueSendResponseSuccessCallback = null; ErrorCallback? writeValueSendResponseErrorCallback = null; }; Tizen implements BluetoothManagerObject; [NoInterfaceObject] interface BluetoothManagerObject { readonly attribute BluetoothManager bluetooth; }; [Constructor(DOMString uuid, Bytes data)] interface BluetoothLEServiceData { attribute BluetoothUUID uuid; attribute DOMString data; }; [Constructor(DOMString id, Bytes data)] interface BluetoothLEManufacturerData { attribute DOMString id; attribute DOMString data; }; [Constructor(optional BluetoothLEAdvertiseDataInit? init)] interface BluetoothLEAdvertiseData { attribute boolean? includeName; attribute BluetoothUUID[]? uuids; attribute BluetoothLESolicitationUUID[]? solicitationuuids; attribute unsigned long? appearance; attribute boolean? includeTxPowerLevel; attribute BluetoothLEServiceData[]? servicesData; attribute BluetoothLEManufacturerData? manufacturerData; }; [NoInterfaceObject] interface BluetoothManager { const DOMString BASE_UUID = "00000000-0000-1000-8000-00805F9B34FB"; readonly attribute BluetoothClassDeviceMajor deviceMajor; readonly attribute BluetoothClassDeviceMinor deviceMinor; readonly attribute BluetoothClassDeviceService deviceService; BluetoothAdapter getDefaultAdapter() raises(WebAPIException); BluetoothLEAdapter getLEAdapter() raises(WebAPIException); BluetoothGATTServer getGATTServer() raises(WebAPIException); byte[] toByteArray(Bytes data) raises(WebAPIException); DOMString toDOMString(Bytes data) raises(WebAPIException); Uint8Array toUint8Array(Bytes data) raises(WebAPIException); BluetoothUUID uuidTo128bit(BluetoothUUID uuid) raises(WebAPIException); BluetoothUUID uuidToShortestPossible(BluetoothUUID uuid) raises(WebAPIException); boolean uuidsEqual(BluetoothUUID uuid1, BluetoothUUID uuid2) raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothAdapter { readonly attribute DOMString name; readonly attribute BluetoothAddress address; readonly attribute boolean powered; readonly attribute boolean visible; void setName(DOMString name, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void setChangeListener(BluetoothAdapterChangeCallback listener) raises(WebAPIException); void unsetChangeListener() raises(WebAPIException); void discoverDevices(BluetoothDiscoverDevicesSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void stopDiscovery(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void getKnownDevices(BluetoothDeviceArraySuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void getDevice(BluetoothAddress address, BluetoothDeviceSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void createBonding(BluetoothAddress address, BluetoothDeviceSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void destroyBonding(BluetoothAddress address, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void registerRFCOMMServiceByUUID(BluetoothUUID uuid, DOMString name, BluetoothServiceSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothLEAdapter { void startScan(BluetoothLEScanCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void stopScan() raises(WebAPIException); boolean isScanning() raises(WebAPIException); void startAdvertise(BluetoothLEAdvertiseData advertiseData, BluetoothAdvertisePacketType packetType, BluetoothLEAdvertiseCallback successCallback, optional ErrorCallback? errorCallback, optional BluetoothAdvertisingMode? mode, optional boolean? connectable) raises(WebAPIException); void stopAdvertise() raises(WebAPIException); long addConnectStateChangeListener(BluetoothLEConnectChangeCallback listener) raises(WebAPIException); void removeConnectStateChangeListener(long watchID); }; [NoInterfaceObject] interface BluetoothGATTService { readonly attribute BluetoothUUID? serviceUuid; readonly attribute BluetoothGATTServiceVariant[] services; readonly attribute BluetoothGATTCharacteristicVariant[] characteristics; }; [NoInterfaceObject] interface BluetoothGATTServerService : BluetoothGATTService { readonly attribute boolean isPrimary; void unregister(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothGATTCharacteristic { readonly attribute BluetoothGATTDescriptorVariant[] descriptors; readonly attribute boolean isBroadcast; readonly attribute boolean hasExtendedProperties; readonly attribute boolean isNotify; readonly attribute boolean isIndication; readonly attribute boolean isReadable; readonly attribute boolean isSignedWrite; readonly attribute boolean isWritable; readonly attribute boolean isWriteNoResponse; readonly attribute BluetoothUUID? uuid; void readValue(ReadValueSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void writeValue(Bytes value, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); long addValueChangeListener(ReadValueSuccessCallback callback) raises(WebAPIException); void removeValueChangeListener(long watchID); }; [NoInterfaceObject] interface BluetoothGATTServerCharacteristic : BluetoothGATTCharacteristic { readonly attribute boolean readPermission; readonly attribute boolean writePermission; readonly attribute boolean encryptedReadPermission; readonly attribute boolean encryptedWritePermission; readonly attribute boolean encryptedSignedReadPermission; readonly attribute boolean encryptedSignedWritePermission; void notifyAboutValueChange(Bytes value, BluetoothAddress? clientAddress, optional NotificationCallback? notificationCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void setReadValueRequestCallback(ReadValueRequestCallback readValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback) raises(WebAPIException); void setWriteValueRequestCallback(WriteValueRequestCallback writeValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback) raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothGATTDescriptor { readonly attribute BluetoothUUID? uuid; void readValue(ReadValueSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void writeValue(Bytes value, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothGATTServerDescriptor : BluetoothGATTDescriptor { readonly attribute boolean readPermission; readonly attribute boolean writePermission; readonly attribute boolean encryptedReadPermission; readonly attribute boolean encryptedWritePermission; readonly attribute boolean encryptedSignedReadPermission; readonly attribute boolean encryptedSignedWritePermission; void setReadValueRequestCallback(ReadValueRequestCallback readValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback) raises(WebAPIException); void setWriteValueRequestCallback(WriteValueRequestCallback writeValueRequestCallback, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback, optional SuccessCallback? sendResponseSuccessCallback, optional ErrorCallback? sendResponseErrorCallback) raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothGATTServer { readonly attribute boolean isRunning; readonly attribute BluetoothGATTServerService[] services; void start(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void stop(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void registerService(BluetoothGATTServerServiceInit service, optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void unregisterAllServices(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void getConnectionMtu(BluetoothAddress clientAddress, ConnectionMtuCallback callback, optional ErrorCallback? errorCallback) raises(WebAPIException); }; [Callback=FunctionOnly, NoInterfaceObject] interface BluetoothLEScanCallback { void onsuccess(BluetoothLEDevice device); }; [Callback=FunctionOnly, NoInterfaceObject] interface BluetoothLEAdvertiseCallback { void onstate(BluetoothAdvertisingState state); }; [Callback, NoInterfaceObject] interface BluetoothLEConnectChangeCallback { void onconnected(BluetoothLEDevice device); void ondisconnected(BluetoothLEDevice device); }; [Callback=FunctionOnly, NoInterfaceObject] interface ReadValueSuccessCallback { void onread(byte[] value); }; [Constructor(long statusCode = 0, optional Bytes data)] interface GATTRequestReply { attribute long statusCode; attribute Bytes? data; }; [Callback=FunctionOnly, NoInterfaceObject] interface ReadValueRequestCallback { GATTRequestReply? onreadrequest(BluetoothAddress clientAddress, long offset); }; [Callback=FunctionOnly, NoInterfaceObject] interface WriteValueRequestCallback { GATTRequestReply? onwriterequest(BluetoothAddress clientAddress, byte[] value, long offset, boolean replyRequired); }; [Callback=FunctionOnly, NoInterfaceObject] interface NotificationCallback { void onnotificationsuccess(BluetoothAddress clientAddress); void onnotificationfail(BluetoothAddress clientAddress, WebAPIException error); void onnotificationfinish(BluetoothAddress clientAddress); }; [Callback=FunctionOnly, NoInterfaceObject] interface ConnectionMtuCallback { void onsuccess(long mtu); }; [NoInterfaceObject] interface BluetoothDevice { readonly attribute DOMString name; readonly attribute BluetoothAddress address; readonly attribute BluetoothClass deviceClass; readonly attribute boolean isBonded; readonly attribute boolean isTrusted; readonly attribute boolean isConnected; readonly attribute BluetoothUUID[] uuids; void connectToServiceByUUID(BluetoothUUID uuid, BluetoothSocketSuccessCallback successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothLEDevice { readonly attribute BluetoothAddress address; readonly attribute DOMString? name; readonly attribute long? txpowerlevel; readonly attribute unsigned long? appearance; readonly attribute BluetoothUUID[]? uuids; readonly attribute BluetoothLESolicitationUUID[]? solicitationuuids; readonly attribute BluetoothLEServiceData[]? serviceData; readonly attribute BluetoothLEManufacturerData? manufacturerData; readonly attribute long? rssi; void connect(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); void disconnect(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); boolean isConnected() raises(WebAPIException); BluetoothGATTService getService(BluetoothUUID uuid) raises(WebAPIException); BluetoothUUID[] getServiceAllUuids() raises(WebAPIException); long addConnectStateChangeListener(BluetoothLEConnectChangeCallback listener) raises(WebAPIException); void removeConnectStateChangeListener(long watchID); unsigned long getAttMtu() raises(WebAPIException); void requestAttMtuChange(unsigned long newAttMtu) raises(WebAPIException); long addAttMtuChangeListener(ConnectionMtuCallback callback) raises(WebAPIException); void removeAttMtuChangeListener(long watchId) raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothSocket { readonly attribute BluetoothUUID uuid; readonly attribute BluetoothSocketState state; readonly attribute BluetoothDevice peer; [TreatNonCallableAsNull] attribute SuccessCallback? onmessage raises(WebAPIException); [TreatNonCallableAsNull] attribute SuccessCallback? onclose raises(WebAPIException); unsigned long writeData(Bytes data) raises(WebAPIException); byte[] readData() raises(WebAPIException); void close() raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothClass { readonly attribute octet major; readonly attribute octet minor; readonly attribute unsigned short[] services; boolean hasService(unsigned short service) raises(WebAPIException); }; [NoInterfaceObject] interface BluetoothClassDeviceMajor { const octet MISC = 0x00; const octet COMPUTER = 0x01; const octet PHONE = 0x02; const octet NETWORK = 0x03; const octet AUDIO_VIDEO = 0x04; const octet PERIPHERAL = 0x05; const octet IMAGING = 0x06; const octet WEARABLE = 0x07; const octet TOY = 0x08; const octet HEALTH = 0x09; const octet UNCATEGORIZED = 0x1F; }; [NoInterfaceObject] interface BluetoothClassDeviceMinor { const octet COMPUTER_UNCATEGORIZED = 0x00; const octet COMPUTER_DESKTOP = 0x01; const octet COMPUTER_SERVER = 0x02; const octet COMPUTER_LAPTOP = 0x03; const octet COMPUTER_HANDHELD_PC_OR_PDA = 0x04; const octet COMPUTER_PALM_PC_OR_PDA = 0x05; const octet COMPUTER_WEARABLE = 0x06; const octet PHONE_UNCATEGORIZED = 0x00; const octet PHONE_CELLULAR = 0x01; const octet PHONE_CORDLESS = 0x02; const octet PHONE_SMARTPHONE = 0x03; const octet PHONE_MODEM_OR_GATEWAY = 0x04; const octet PHONE_ISDN = 0x05; const octet AV_UNRECOGNIZED = 0x00; const octet AV_WEARABLE_HEADSET = 0x01; const octet AV_HANDSFREE = 0x02; const octet AV_MICROPHONE = 0x04; const octet AV_LOUDSPEAKER = 0x05; const octet AV_HEADPHONES = 0x06; const octet AV_PORTABLE_AUDIO = 0x07; const octet AV_CAR_AUDIO = 0x08; const octet AV_SETTOP_BOX = 0x09; const octet AV_HIFI = 0x0a; const octet AV_VCR = 0x0b; const octet AV_VIDEO_CAMERA = 0x0c; const octet AV_CAMCORDER = 0x0d; const octet AV_MONITOR = 0x0e; const octet AV_DISPLAY_AND_LOUDSPEAKER = 0x0f; const octet AV_VIDEO_CONFERENCING = 0x10; const octet AV_GAMING_TOY = 0x12; const octet PERIPHERAL_UNCATEGORIZED = 0; const octet PERIPHERAL_KEYBOARD = 0x10; const octet PERIPHERAL_POINTING_DEVICE = 0x20; const octet PERIPHERAL_KEYBOARD_AND_POINTING_DEVICE = 0x30; const octet PERIPHERAL_JOYSTICK = 0x01; const octet PERIPHERAL_GAMEPAD = 0x02; const octet PERIPHERAL_REMOTE_CONTROL = 0x03; const octet PERIPHERAL_SENSING_DEVICE = 0x04; const octet PERIPHERAL_DEGITIZER_TABLET = 0x05; const octet PERIPHERAL_CARD_READER = 0x06; const octet PERIPHERAL_DIGITAL_PEN = 0x07; const octet PERIPHERAL_HANDHELD_SCANNER = 0x08; const octet PERIPHERAL_HANDHELD_INPUT_DEVICE = 0x09; const octet IMAGING_UNCATEGORIZED = 0x00; const octet IMAGING_DISPLAY = 0x04; const octet IMAGING_CAMERA = 0x08; const octet IMAGING_SCANNER = 0x10; const octet IMAGING_PRINTER = 0x20; const octet WEARABLE_WRITST_WATCH = 0x01; const octet WEARABLE_PAGER = 0x02; const octet WEARABLE_JACKET = 0x03; const octet WEARABLE_HELMET = 0x04; const octet WEARABLE_GLASSES = 0x05; const octet TOY_ROBOT = 0x01; const octet TOY_VEHICLE = 0x02; const octet TOY_DOLL = 0x03; const octet TOY_CONTROLLER = 0x04; const octet TOY_GAME = 0x05; const octet HEALTH_UNDEFINED = 0x00; const octet HEALTH_BLOOD_PRESSURE_MONITOR = 0x01; const octet HEALTH_THERMOMETER = 0x02; const octet HEALTH_WEIGHING_SCALE = 0x03; const octet HEALTH_GLUCOSE_METER = 0x04; const octet HEALTH_PULSE_OXIMETER = 0x05; const octet HEALTH_PULSE_RATE_MONITOR = 0x06; const octet HEALTH_DATA_DISPLAY = 0x07; const octet HEALTH_STEP_COUNTER = 0x08; const octet HEALTH_BODY_COMPOSITION_ANALYZER = 0x09; const octet HEALTH_PEAK_FLOW_MONITOR = 0x0a; const octet HEALTH_MEDICATION_MONITOR = 0x0b; const octet HEALTH_KNEE_PROSTHESIS = 0x0c; const octet HEALTH_ANKLE_PROSTHESIS = 0x0d; }; [NoInterfaceObject] interface BluetoothClassDeviceService { const unsigned short LIMITED_DISCOVERABILITY = 0x0001; const unsigned short POSITIONING = 0x0008; const unsigned short NETWORKING = 0x0010; const unsigned short RENDERING = 0x0020; const unsigned short CAPTURING = 0x0040; const unsigned short OBJECT_TRANSFER = 0x0080; const unsigned short AUDIO = 0x0100; const unsigned short TELEPHONY = 0x0200; const unsigned short INFORMATION = 0x0400; }; [NoInterfaceObject] interface BluetoothServiceHandler { readonly attribute BluetoothUUID uuid; readonly attribute DOMString name; readonly attribute boolean isConnected; [TreatNonCallableAsNull] attribute BluetoothSocketSuccessCallback? onconnect raises(WebAPIException); void unregister(optional SuccessCallback? successCallback, optional ErrorCallback? errorCallback) raises(WebAPIException); }; [Callback, NoInterfaceObject] interface BluetoothAdapterChangeCallback { void onstatechanged(boolean powered); void onnamechanged(DOMString name); void onvisibilitychanged(boolean visible); }; [Callback=FunctionOnly, NoInterfaceObject] interface BluetoothDeviceSuccessCallback { void onsuccess(BluetoothDevice device); }; [Callback=FunctionOnly, NoInterfaceObject] interface BluetoothDeviceArraySuccessCallback { void onsuccess(BluetoothDevice[] devices); }; [Callback, NoInterfaceObject] interface BluetoothDiscoverDevicesSuccessCallback { void onstarted(); void ondevicefound(BluetoothDevice device); void ondevicedisappeared(BluetoothAddress address); void onfinished(BluetoothDevice[] foundDevices); }; [Callback=FunctionOnly, NoInterfaceObject] interface BluetoothSocketSuccessCallback { void onsuccess(BluetoothSocket socket); }; [Callback=FunctionOnly, NoInterfaceObject] interface BluetoothServiceSuccessCallback { void onsuccess(BluetoothServiceHandler handler); }; };