Pops a cleanup function to be executed when the thread is canceled.

This macro will remove a previously pushed cleanup function, thus if the thread is canceled with eina_thread_cancel() and the thread was previously marked as cancellable with eina_thread_cancellable_set(), that cleanup won't be executed anymore.

It must be paired with EINA_THREAD_CLEANUP_PUSH() in the same code block as they will expand to do {} while ()!

Note:

If the block within EINA_THREAD_CLEANUP_PUSH() and EINA_THREAD_CLEANUP_POP() returns, the cleanup callback will not be executed even if exec_cleanup is EINA_TRUE! To avoid problems prefer to use eina_thread_cancellable_run()!

Parameters:

[in]

exec_cleanup

if EINA_TRUE, the function registered with EINA_THREAD_CLEANUP_PUSH() will be executed.

See also:

eina_thread_cancellable_run()

Since (EFL) :

1.19

Pushes a cleanup function to be executed when the thread is canceled.

This macro will schedule a function cleanup(data) to be executed if the thread is canceled with eina_thread_cancel() and the thread was previously marked as cancellable with eina_thread_cancellable_set().

It must be paired with EINA_THREAD_CLEANUP_POP() in the same code block as they will expand to do {} while ()!

The cleanup function may also be executed if EINA_THREAD_CLEANUP_POP(EINA_TRUE) is used.

Note:

If the block within EINA_THREAD_CLEANUP_PUSH() and EINA_THREAD_CLEANUP_POP() returns, the cleanup callback will not be executed! To avoid problems prefer to use eina_thread_cancellable_run()!

Parameters:

[in]	cleanup	The function to execute on cancellation.
[in]	data	The context to give to cleanup function.

See also:

eina_thread_cancellable_run()

Since (EFL) :

1.19

Type for a generic thread.

Type for the definition of a cancellable callback to run.

Since (EFL) :

1.19

Type for the definition of a thread callback function

Type to enumerate different thread priorities

Attempts to cancel a running thread.

This function sends a cancellation request to the thread, however that request is only fulfilled if the thread is cancellable (eina_thread_cancellable_set() with EINA_TRUE as first parameter) and it will wait for a cancellation point, be eina_thread_cancel_checkpoint() or some syscall as defined in man:pthreads(7).

A thread that was canceled will return EINA_THREAD_JOIN_CANCELED when eina_thread_join() is called.

Parameters:

[in]

t

Thread to cancel.

Returns:

EINA_FALSE if thread was not running, EINA_TRUE otherwise. Note that if a thread is not cancellable and it is running, this function will return EINA_TRUE!

Since (EFL) :

1.19

If the current thread is cancellable, this introduces a cancellation check point. Otherwise it's a no-operation.

Eina threads follow pthread_setcanceltype() PTHREAD_CANCEL_DEFERRED, that is, the actual termination will wait for a cancellation point, usually a syscall defined in man:pthreads(7) or an explicit cancellation point defined with this function.

See also:

eina_thread_cancel_checkpoint()

Since (EFL) :

1.19

This function will setup cleanup callback, turn the thread cancellable, execute the given callback, reset the cancellable state to its old value, run the cleanup callback and then return the callback return value.

Note:

cleanup_cb is configured before the thread is made cancellable, thus it will be executed while cb may not in the case the thread was already canceled and that was pending.

This helper does exactly the following code. Should you need a slightly different behavior, use the base calls yourself.

    Eina_Bool old = EINA_FALSE;
    void *ret;

    EINA_THREAD_CLEANUP_PUSH(cleanup_cb, data);
    eina_thread_cancellable_set(EINA_TRUE, &old); // is a cancellation point
    ret = cb(data); // may not run if was previously canceled
    EINA_THREAD_CLEANUP_POP(EINA_TRUE);
    eina_thread_cancellable_set(old, NULL);
    return ret;

Parameters:

[in]	cb	a cancellable callback to possibly run. The callback may not be executed if the thread had a pending cancellation request. During its execution the callback may be canceled at explicit cancellation points using eina_thread_cancel_checkpoint(), as well as some syscalls defined in man:pthreads(7).
[in]	cleanup_cb	a cleanup callback to be executed regardless of the thread being canceled or not. This function will be executed even if cb wasn't.
[in]	data	context to give to both cb and cleanup_cb.

Returns:

the return value of cb. If the thread was canceled, this function will not return.

Since (EFL) :

1.19

Enables or disables if the current thread can be canceled.

By default eina_thread_create() will return a thread with cancellation disabled. One can enable the cancellation by using EINA_TRUE in cancellable.

Eina threads follow pthread_setcanceltype() PTHREAD_CANCEL_DEFERRED, that is, the actual termination will wait for a cancellation point, usually a syscall defined in man:pthreads(7) or an explicit cancellation point defined with eina_thread_cancel_checkpoint().

In order to provide cleanup around critical blocks use EINA_THREAD_CLEANUP_PUSH() and EINA_THREAD_CLEANUP_POP() macros (which maps to pthread_cleanup_push() and pthread_cleanup_pop()), or the helper function eina_thread_cancellable_run() which does the pair for you.

Parameters:

[in]	cancellable	If EINA_TRUE, this thread will be accept cancellation requests. If EINA_FALSE -- the default, it will ignore cancellation requests.
[in]	was_cancellable	If non-NULL, will return the previous state, shall you want to restore.

Returns:

EINA_TRUE if it succeeds in setting the cancellable state or EINA_FALSE otherwise.

See also:

eina_thread_cancel_checkpoint()

EINA_THREAD_CLEANUP_PUSH()

EINA_THREAD_CLEANUP_POP()

eina_thread_cancellable_run()

eina_thread_cancel()

Since (EFL) :

1.19

Creates a new thread, setting its priority and affinity.

Parameters:

[out]	t	where to return the thread identifier. Must not be NULL.
[in]	prio	thread priority to use, usually EINA_THREAD_BACKGROUND
[in]	affinity	thread affinity to use. To not set affinity use -1.
[in]	func	function to run in the thread. Must not be NULL.
[in]	data	context data to provide to func as first argument.

Returns:

EINA_TRUE if thread was created, EINA_FALSE on errors.

Since (EFL) :

1.8

Since :

3.0

Checks if two thread identifiers are the same.

Parameters:

[in]	t1	first thread identifier to compare.
[in]	t2	second thread identifier to compare.

Returns:

EINA_TRUE if they are equal, EINA_FALSE otherwise.

Since (EFL) :

1.8

Since :

3.0

Joins a currently running thread, waiting until it finishes.

This function will block the current thread until t finishes. The returned value is the one returned by t func() and may be NULL on errors. See Error to identify problems.

Parameters:

[in]

t

thread identifier to wait.

Returns:

value returned by t creation function func() or NULL on errors. Check error with Error. If the thread was canceled, it will return EINA_THREAD_JOIN_CANCELED.

Since (EFL) :

1.8

Since :

3.0

Sets the name of a given thread for debugging purposes.

This maps to the pthread_setname_np() GNU extension or similar if available. The name may be limited in size (possibly 16 characters including the null byte terminator). This is useful for debugging to name a thread so external tools can display a meaningful name attached to the thread.

Parameters:

[in]	t	thread to set the name of
[in]	name	a string to name the thread - this cannot be NULL

Returns:

EINA_TRUE if it succeeds in setting the name or EINA_FALSE otherwise.

Since (EFL) :

1.16

Since :

3.0

Returns identifier of the current thread.

Returns:

identifier of current thread.

Since (EFL) :

1.8

Since :

3.0

The return value of eina_thread_join() if it was canceled with eina_thread_cancel().

A thread must be explicitly flagged as cancellable with eina_thread_cancellable_set(), by default it's not and this value shouldn't be returned.

See also:

eina_thread_join()

Since (EFL) :

1.19