Tizen Native API  3.0
Location Manager

This Location Manager API provides functions for obtaining information related to geographical location. This API provides functions to acquire information related to the current position. Notifications on events like service becoming enabled or disabled, new position data being available and others can also be acquired.

Required Header

#include <locations.h>

Overview

The Location Manager API provides functions to acquire information about geographical location, including both as accurate a current position as possible, and receiving notification of changes in position, crossing boundary "fences", and velocity changes detected by the device. The related Geolocation API can be used to convert the location to a physical address. Notifications can be received about the following events:

  • Change in service status (enabled / disabled)
  • New position and velocity information becoming available
  • Given area being entered or left (geofencing) Information on GPS satellites is provided by the GPS Status & Satellite API. The main component of the Location Service is the location manager. A location manager serves as a gateway, so the application does not have to manage the details of the back-end connection, which might be GPS, WiFi or others, although it may instruct the location manager as to a preference. The location manager also manages the callback functions which it invokes when a given event takes place. The location manager has the following properties:
  • Method
  • Boundary
  • 'Position updated' callback
  • 'Service state change' callback
  • 'Velocity updated' callback
  • 'Boundary event' callback The method property of a location manager (location_method_e) determines the source of location information. It can be set only once - when the location manager is instantiated. The method can be one specific location method, or hybrid. A location manager set to the hybrid method will automatically choose the best method available at the moment, choosing between GPS, WPS and WPS. Note that the method may change any time, due to signals coming in/out of range, and so on. If more than one method is available, priorities are as follows: 1. GPS
    2. WPS
    If no methods are available, the service state is changed to disabled and the appropriate callback is called. See location_manager_set_service_state_changed_cb() and location_service_state_changed_cb(). The boundary property describes a border enclosing an area. The area can be circular - defined by its center in geographic coordinates a radius, or rectangular - defined by the geographic coordinates of its top-left and bottom-right corner. The location manager will use the selected method to track if the area has been entered or exited. The location manager will send asynchronous notifications by invoking previously registered callback functions on such change events. There may be multiple location managers. Callback functions to receive notifications are registered to a specific location manager, not to the location service as a whole. So it is, for example, possible to define several different geographic areas or fences, using different location methods, each being tracked by a different location manager and leading to distinct callbacks. Setting and unsetting callbacks for the manager can be done at any time, however before callbacks set for a given location manager can be invoked, the location service must be started for that location manager. This constraint holds for managers with GPS, WPS, and Hybrid methods. See the Location manager life cycle section below. Note the start/stop functions apply only to the individual location manager and do not affect any other location managers that may be running. Only one callback can be set for a given event within the scope of a single location manager. Successive callback setting will result in the new callback replacing the old one. If an 'unset callback' function is called when there is no callback set, no error is returned. Callbacks can be set and unset any number of times.

Location manager life cycle

1. Create location manager ( location_manager_create() )
2. Set callbacks and other required information
3. Start service with location_manager_start()
4. Wait until state change callback ( location_service_state_changed_cb() ) is called with LOCATIONS_SERVICE_ENABLED as first argument
5. Other callbacks are working now, wait for events and process
6. Stop service with location_manager_stop()
7. Wait until state change callback ( location_service_state_changed_cb() ) is called with LOCATIONS_SERVICE_DISABLED as first argument
8. Destroy location manager ( location_manager_destroy() )
After stopping the location service for a given location manager, the location manager can still be used. So some functions can be called if they do not require a location service running on your device. The location service can be re-started later. If a location manager is no longer needed and is going to be destroyed, it is not mandatory to call location_manager_stop(), as location_manager_destroy() will call it automatically. Note that after a location manager has been destroyed, the handle (location_manager_h) can be reused - location_manager_create() can be called again for this handle. In other words, the state before creation and after destruction can be treated as the same state.

Related Features

This API is related with the following features:

Functions

bool location_manager_is_supported_method (location_method_e method)
 Checks whether the given location method is available.
int location_manager_is_enabled_method (location_method_e method, bool *enable)
 Checks whether the given location method is enabled or not on setting.
int location_manager_enable_method (const location_method_e method, const bool enable)
 Enables the given location method.
int location_manager_create (location_method_e method, location_manager_h *manager)
 Creates a new location manager.
int location_manager_destroy (location_manager_h manager)
 Releases the location manager.
int location_manager_request_single_location (location_manager_h manager, int timeout, location_updated_cb callback, void *user_data)
 Requests to update current location once.
int location_manager_start (location_manager_h manager)
 Starts the location service.
int location_manager_stop (location_manager_h manager)
 Stops the location service.
int location_manager_add_boundary (location_manager_h manager, const location_bounds_h bounds)
 Adds bounds for a given location manager.
int location_manager_remove_boundary (location_manager_h manager, const location_bounds_h bounds)
 Deletes bounds for a given location manager.
int location_manager_foreach_boundary (location_manager_h manager, location_bounds_cb callback, void *user_data)
 Retrieves all location bounds by invoking a specific callback for each location bounds.
int location_manager_get_method (location_manager_h manager, location_method_e *method)
 Gets the given location manager's method.
int location_manager_get_position (location_manager_h manager, double *altitude, double *latitude, double *longitude, time_t *timestamp)
 Gets the current position information.
int location_manager_get_location (location_manager_h manager, double *altitude, double *latitude, double *longitude, double *climb, double *direction, double *speed, location_accuracy_level_e *level, double *horizontal, double *vertical, time_t *timestamp)
 Gets the current position information.
int location_manager_get_velocity (location_manager_h manager, double *climb, double *direction, double *speed, time_t *timestamp)
 Gets the current velocity information.
int location_manager_get_accuracy (location_manager_h manager, location_accuracy_level_e *level, double *horizontal, double *vertical)
 Gets the current accuracy information.
int location_manager_get_last_position (location_manager_h manager, double *altitude, double *latitude, double *longitude, time_t *timestamp)
 Gets the last position information which is recorded.
int location_manager_get_last_location (location_manager_h manager, double *altitude, double *latitude, double *longitude, double *climb, double *direction, double *speed, location_accuracy_level_e *level, double *horizontal, double *vertical, time_t *timestamp)
 Gets the last location information.
int location_manager_get_last_velocity (location_manager_h manager, double *climb, double *direction, double *speed, time_t *timestamp)
 Gets the last velocity information which is recorded.
int location_manager_get_last_accuracy (location_manager_h manager, location_accuracy_level_e *level, double *horizontal, double *vertical)
 Gets the last accuracy information which is recorded.
int location_manager_get_accessibility_state (location_accessibility_state_e *state) TIZEN_DEPRECATED_API
 Gets the current application's location accessibility status.
int location_manager_set_position_updated_cb (location_manager_h manager, location_position_updated_cb callback, int interval, void *user_data)
 Registers a callback function to be invoked at defined interval with updated position information.
int location_manager_unset_position_updated_cb (location_manager_h manager)
 Unregisters the callback function.
int location_manager_set_velocity_updated_cb (location_manager_h manager, location_velocity_updated_cb callback, int interval, void *user_data)
 Registers a callback function to be invoked at defined interval with updated velocity information.
int location_manager_unset_velocity_updated_cb (location_manager_h manager)
 Unregisters the callback function.
int location_manager_set_service_state_changed_cb (location_manager_h manager, location_service_state_changed_cb callback, void *user_data)
 Registers a callback function to be invoked when the location service state is changed.
int location_manager_unset_service_state_changed_cb (location_manager_h manager)
 Unregisters the callback function.
int location_manager_set_zone_changed_cb (location_manager_h manager, location_zone_changed_cb callback, void *user_data)
 Registers a callback function to be invoked when the previously set boundary area is entered or left.
int location_manager_unset_zone_changed_cb (location_manager_h manager)
 Unregisters the callback function.
int location_manager_set_setting_changed_cb (location_method_e method, location_setting_changed_cb callback, void *user_data)
 Registers a callback function to be invoked when the location setting is changed.
int location_manager_unset_setting_changed_cb (location_method_e method)
 Unregisters the callback function.
int location_manager_get_distance (double start_latitude, double start_longitude, double end_latitude, double end_longitude, double *distance)
 Gets the distance in meters between two locations.
int location_manager_set_distance_based_location_changed_cb (location_manager_h manager, location_changed_cb callback, int interval, double distance, void *user_data)
 Registers a callback function to be invoked at minimum interval or minimum distance with updated position information.
int location_manager_unset_distance_based_location_changed_cb (location_manager_h manager)
 Unregisters the callback function.
int location_manager_set_location_changed_cb (location_manager_h manager, location_changed_cb callback, int interval, void *user_data)
 Registers a callback function to be invoked at defined interval with updated location information.
int location_manager_unset_location_changed_cb (location_manager_h manager)
 Unregisters the callback function.
int location_manager_set_location_batch_cb (location_manager_h manager, location_batch_cb callback, int batch_interval, int batch_period, void *user_data)
 Registers a callback function to be invoked when batch_period is expired.
int location_manager_unset_location_batch_cb (location_manager_h manager)
 Unregisters the callback function.
int location_manager_start_batch (location_manager_h manager)
 Starts the location batch service.
int location_manager_stop_batch (location_manager_h manager)
 Stops the location batch service.
int location_manager_foreach_location_batch (location_manager_h manager, location_batch_get_location_cb callback, void *user_data)
 Retrieves all location information by invoking a specific callback for each location data.
int location_manager_is_enabled_mock_location (bool *enabled)
 Checks whether the mock location is enabled.
int location_manager_enable_mock_location (const bool enable)
 Enables mock location.
int location_manager_set_mock_location (location_manager_h manager, const double latitude, const double longitude, const double altitude, const double speed, const double direction, const double accuracy)
 Sets a mock location for the given location method.
int location_manager_clear_mock_location (location_manager_h manager)
 Clears a mock location.

Typedefs

typedef struct location_manager_s * location_manager_h
 The location manager handle.
typedef void(* location_position_updated_cb )(double latitude, double longitude, double altitude, time_t timestamp, void *user_data)
 Called at defined interval with updated position information.
typedef void(* location_velocity_updated_cb )(double speed, double direction, double climb, time_t timestamp, void *user_data)
 Called at defined interval with updated velocity information.
typedef void(* location_updated_cb )(location_error_e error, double latitude, double longitude, double altitude, time_t timestamp, double speed, double direction, double climb, void *user_data)
 Called at defined interval with updated location information.
typedef void(* location_service_state_changed_cb )(location_service_state_e state, void *user_data)
 Called when the state of location service is changed from enabled to disabled or vice versa.
typedef void(* location_zone_changed_cb )(location_boundary_state_e state, double latitude, double longitude, double altitude, time_t timestamp, void *user_data)
 Called when the user-defined zones are entered or exited.
typedef void(* location_setting_changed_cb )(location_method_e method, bool enable, void *user_data)
 Called when the state of location method is changed.
typedef bool(* location_bounds_cb )(location_bounds_h bounds, void *user_data)
 Called once for each location bound.
typedef void(* location_changed_cb )(double latitude, double longitude, double altitude, double speed, double direction, double horizontal_accuracy, time_t timestamp, void *user_data)
 Called at defined interval with updated location information.
typedef void(* location_batch_cb )(int num_of_location, void *user_data)
 Called when the batch interval is expired.
typedef bool(* location_batch_get_location_cb )(double latitude, double longitude, double altitude, double speed, double direction, double horizontal, double vertical, time_t timestamp, void *user_data)
 Gets iteratively to receive location batch data.

Typedef Documentation

typedef void(* location_batch_cb)(int num_of_location, void *user_data)

Called when the batch interval is expired.

Since :
2.3.2
Parameters:
[in]num_of_locationThe number of location batch data
[in]user_dataThe user data passed from the callback registration function
Precondition:
location_manager_start_batch() will invoke this callback if you register this callback using location_manager_set_location_batch_cb().
See also:
location_manager_start_batch()
location_manager_set_location_batch_cb()
typedef bool(* location_batch_get_location_cb)(double latitude, double longitude, double altitude, double speed, double direction, double horizontal, double vertical, time_t timestamp, void *user_data)

Gets iteratively to receive location batch data.

Since :
2.3.2
Parameters:
[in]latitudeThe updated latitude [-90.0 ~ 90.0] (degrees)
[in]longitudeThe updated longitude [-180.0 ~ 180.0] (degrees)
[in]altitudeThe updated altitude (meters)
[in]speedThe updated speed (km/h)
[in]directionThe updated direction (in degrees from the north)
[in]horizontalThe horizontal accuracy (meters)
[in]verticalThe vertical accuracy (meters)
[in]timestampThe timestamp (time when measurement took place or 0 if valid)
[in]user_dataThe user data passed from the callback registration function
Returns:
true to continue with the next iteration of the loop, otherwise false to break out of the loop
Precondition:
location_manager_foreach_location_batch() will invoke this callback.
See also:
location_manager_foreach_location_batch()
typedef bool(* location_bounds_cb)(location_bounds_h bounds, void *user_data)

Called once for each location bound.

Since :
2.3.1
Parameters:
[in]boundsThe location bounds handle
[in]user_dataThe user data passed from the callback registration function
Returns:
true to continue with the next iteration of the loop, otherwise false to break out of the loop
Precondition:
location_manager_foreach_boundary() will invoke this callback.
See also:
location_manager_foreach_boundary()
typedef void(* location_changed_cb)(double latitude, double longitude, double altitude, double speed, double direction, double horizontal_accuracy, time_t timestamp, void *user_data)

Called at defined interval with updated location information.

Since :
3.0
Parameters:
[in]latitudeThe updated latitude [-90.0 ~ 90.0] (degrees)
[in]longitudeThe updated longitude [-180.0 ~ 180.0] (degrees)
[in]altitudeThe updated altitude (meters)
[in]speedThe updated speed (km/h)
[in]directionThe updated direction (in degrees from the north)
[in]horizontal_accuracyThe horizontal accuracy (meters)
[in]timestampThe timestamp (time when measurement took place or 0 if valid)
[in]user_dataThe user data passed from the callback registration function
Precondition:
location_manager_start() will invoke this callback if you register this callback using location_manager_set_position_updated_cb().
See also:
location_manager_start()
location_manager_set_distance_based_location_changed_cb()
location_manager_set_location_changed_cb()
typedef struct location_manager_s* location_manager_h

The location manager handle.

Since :
2.3.1
typedef void(* location_position_updated_cb)(double latitude, double longitude, double altitude, time_t timestamp, void *user_data)

Called at defined interval with updated position information.

Since :
2.3.1
Parameters:
[in]latitudeThe updated latitude [-90.0 ~ 90.0] (degrees)
[in]longitudeThe updated longitude [-180.0 ~ 180.0] (degrees)
[in]altitudeThe updated altitude (meters)
[in]timestampThe timestamp (time when measurement took place or 0 if valid)
[in]user_dataThe user data passed from the call registration function
Precondition:
location_manager_start() will invoke this callback if you register this callback using location_manager_set_position_updated_cb().
See also:
location_manager_start()
location_manager_set_position_updated_cb()
typedef void(* location_service_state_changed_cb)(location_service_state_e state, void *user_data)

Called when the state of location service is changed from enabled to disabled or vice versa.

Since :
2.3.1
Parameters:
[in]stateThe service state
[in]user_dataThe user data passed from the callback registration function
Precondition:
Either location_manager_start() or location_manager_stop() will invoke this callback if you register this callback using location_manager_set_service_state_changed_cb().
See also:
location_manager_start()
location_manager_stop()
location_manager_set_service_state_changed_cb()
location_service_state_e
typedef void(* location_setting_changed_cb)(location_method_e method, bool enable, void *user_data)

Called when the state of location method is changed.

Since :
2.3.1
Parameters:
[in]methodThe method changed on setting
[in]enableThe setting value changed
[in]user_dataThe user data passed from the callback registration function
Precondition:
location_setting_changed_cb() will invoke this callback if you register this callback using location_manager_set_setting_changed_cb().
See also:
location_manager_set_setting_changed_cb()
location_manager_unset_setting_changed_cb()
typedef void(* location_updated_cb)(location_error_e error, double latitude, double longitude, double altitude, time_t timestamp, double speed, double direction, double climb, void *user_data)

Called at defined interval with updated location information.

Since :
2.3.1
Parameters:
[in]errorLOCATIONS_ERROR_NONE Successful
[in]latitudeThe updated latitude [-90.0 ~ 90.0] (degrees)
[in]longitudeThe updated longitude [-180.0 ~ 180.0] (degrees)
[in]altitudeThe updated altitude (meters)
[in]timestampThe timestamp (time when measurement took place or 0 if valid)
[in]speedThe updated speed (km/h)
[in]directionThe updated direction (in degrees from the north)
[in]climbThe updated climb (km/h)
[in]user_dataThe user data passed from the callback registration function
Precondition:
location_manager_request_single_location() will invoke this callback.
See also:
location_manager_request_single_location()
typedef void(* location_velocity_updated_cb)(double speed, double direction, double climb, time_t timestamp, void *user_data)

Called at defined interval with updated velocity information.

Since :
2.3.1
Parameters:
[in]speedThe updated speed (km/h)
[in]directionThe updated direction (in degrees from the north)
[in]climbThe updated climb (km/h)
[in]timestampThe timestamp (time when measurement took place or 0 if valid)
[in]user_dataThe user data passed from the callback registration function
Precondition:
location_manager_start() will invoke this callback if you register this callback using location_manager_set_velocity_updated_cb().
See also:
location_manager_start()
location_manager_set_velocity_updated_cb()
typedef void(* location_zone_changed_cb)(location_boundary_state_e state, double latitude, double longitude, double altitude, time_t timestamp, void *user_data)

Called when the user-defined zones are entered or exited.

Since :
2.3.1
Parameters:
[in]stateThe boundary state
[in]latitudeThe updated latitude [-90.0 ~ 90.0] (degrees)
[in]longitudeThe updated longitude [-180.0 ~ 180.0] (degrees)
[in]altitudeThe updated altitude (meters)
[in]timestampThe timestamp (time when measurement took place or 0 if valid)
[in]user_dataThe user data passed from the callback registration function
Precondition:
location_manager_start() will invoke this callback if you register this callback using location_manager_set_zone_changed_cb().
See also:
location_boundary_state_e
location_manager_start()
location_manager_set_zone_changed_cb()

Enumeration Type Documentation

Enumeration for the location service accessibility state.

Deprecated:
Deprecated since 3.0
Since :
2.3.1
Enumerator:
LOCATIONS_ACCESS_STATE_NONE 

Access state is not determined

LOCATIONS_ACCESS_STATE_DENIED 

Access denied

LOCATIONS_ACCESS_STATE_ALLOWED 

Access authorized

Enumeration for Approximate accuracy level of given information.

Since :
2.3.1
Enumerator:
LOCATIONS_ACCURACY_NONE 

Invalid data

LOCATIONS_ACCURACY_COUNTRY 

Country accuracy level

LOCATIONS_ACCURACY_REGION 

Regional accuracy level

LOCATIONS_ACCURACY_LOCALITY 

Local accuracy level

LOCATIONS_ACCURACY_POSTALCODE 

Postal accuracy level

LOCATIONS_ACCURACY_STREET 

Street accuracy level

LOCATIONS_ACCURACY_DETAILED 

Detailed accuracy level

Enumeration for error code for Location manager.

Since :
2.3.1
Enumerator:
LOCATIONS_ERROR_NONE 

Successful

LOCATIONS_ERROR_OUT_OF_MEMORY 

Out of memory

LOCATIONS_ERROR_INVALID_PARAMETER 

Invalid parameter

LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWED 

Permission denied

LOCATIONS_ERROR_NOT_SUPPORTED 

Not supported

LOCATIONS_ERROR_INCORRECT_METHOD 

Location manager contains incorrect method for a given call

LOCATIONS_ERROR_NETWORK_FAILED 

Network unavailable

LOCATIONS_ERROR_SERVICE_NOT_AVAILABLE 

Location service is not available

LOCATIONS_ERROR_GPS_SETTING_OFF 

Setting for GPS, WPS, or MOCK is turned off

LOCATIONS_ERROR_SECURITY_RESTRICTED 

Restricted by security system policy

LOCATIONS_ERROR_SETTING_OFF 

Setting for GPS, WPS, or MOCK is turned off (Since 3.0)

Enumeration for Location method type.

Since :
2.3.1
Enumerator:
LOCATIONS_METHOD_NONE 

Undefined method

LOCATIONS_METHOD_HYBRID 

This method selects the best method available at the moment

LOCATIONS_METHOD_GPS 

This method uses Global Positioning System

LOCATIONS_METHOD_WPS 

This method uses WiFi Positioning System

LOCATIONS_METHOD_PASSIVE 

This method can be used to passively receive location updates without power consumption (Since 3.0)

Enumeration for the state of the location service.

Since :
2.3.1
Enumerator:
LOCATIONS_SERVICE_DISABLED 

Service is disabled

LOCATIONS_SERVICE_ENABLED 

Service is enabled


Function Documentation

Adds bounds for a given location manager.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
[in]boundsThe location bounds handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_OUT_OF_MEMORYOut of memory
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
It invokes location_manager_set_zone_changed_cb() when a boundary is entered or exited, if you set a callback with location_manager_set_zone_changed_cb().
See also:
location_manager_remove_boundary()
location_manager_set_zone_changed_cb()

Clears a mock location.

Since :
3.0
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_SETTING_OFFMOCK location is not enabled
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_create()
location_manager_is_enabled_mock_location()
location_manager_enable_mock_location()
location_manager_set_mock_location()

Creates a new location manager.

Since :
2.3.1
Remarks:
You must release manager using location_manager_destroy().
Parameters:
[in]methodThe location method
[out]managerThe location manager handle that is newly created
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_OUT_OF_MEMORYOut of memory
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_destroy()

Releases the location manager.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_create()
int location_manager_enable_method ( const location_method_e  method,
const bool  enable 
)

Enables the given location method.

Warning:
This is not for use by third-party applications.
Since :
2.3.1
Privilege Level:
platform
Privilege:
http://tizen.org/privilege/location.enable
Parameters:
[in]methodThe location method to be checked
[in]enableThe value to set
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INCORRECT_METHODIncorrect method
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDPermission denied
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_is_enabled_method()
location_manager_create()
int location_manager_enable_mock_location ( const bool  enable)

Enables mock location.

The mock location is a testing function to make location API and callback deliver a mock location set by location_manager_set_mock_location() instead of real positioning data even in the other applications.

Since :
3.0
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Remarks:
The mock location can only be enabled if developer mode is enabled.
Parameters:
[in]enableThe value to set
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_SETTING_OFFMOCK location is not enabled
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDPermission denied
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_is_enabled_mock_location()
location_manager_set_mock_location()
location_manager_clear_mock_location()
int location_manager_foreach_boundary ( location_manager_h  manager,
location_bounds_cb  callback,
void *  user_data 
)

Retrieves all location bounds by invoking a specific callback for each location bounds.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
[in]callbackThe iteration callback
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
location_bounds_cb() will be invoked.
See also:
location_manager_add_boundary()
location_manager_remove_boundary()
location_bounds_cb()

Retrieves all location information by invoking a specific callback for each location data.

Since :
2.3.2
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[in]callbackThe iteration callback function
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
location_manager_foreach_location_batch() is available after location_batch_cb() is invoked.
Postcondition:
location_batch_get_location_cb() will be invoked.
See also:
location_manager_start_batch()
location_batch_cb()
location_batch_get_location_cb()

Gets the current application's location accessibility status.

Deprecated:
Deprecated since 3.0
Since :
2.3.1
Parameters:
[out]stateThe current location service accessibility status
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
int location_manager_get_accuracy ( location_manager_h  manager,
location_accuracy_level_e level,
double *  horizontal,
double *  vertical 
)

Gets the current accuracy information.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[out]levelThe accuracy level
[out]horizontalThe horizontal accuracy (meters)
[out]verticalThe vertical accuracy (meters)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_GPS_SETTING_OFFGPS is not enabled
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
The location service state must be LOCATIONS_SERVICE_ENABLED with location_manager_start().
int location_manager_get_distance ( double  start_latitude,
double  start_longitude,
double  end_latitude,
double  end_longitude,
double *  distance 
)

Gets the distance in meters between two locations.

Since :
2.3.1
Parameters:
[in]start_latitudeThe starting latitude [-90.0 ~ 90.0] (degrees)
[in]start_longitudeThe starting longitude [-180.0 ~ 180.0] (degrees)
[in]end_latitudeThe ending latitude [-90.0 ~ 90.0] (degrees)
[in]end_longitudeThe ending longitude [-180.0 ~ 180.0] (degrees)
[out]distanceThe distance between two locations (meters)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
int location_manager_get_last_accuracy ( location_manager_h  manager,
location_accuracy_level_e level,
double *  horizontal,
double *  vertical 
)

Gets the last accuracy information which is recorded.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[out]levelThe last accuracy level
[out]horizontalThe last horizontal accuracy (meters)
[out]verticalThe last vertical accuracy (meters)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
The location manager handle must be created by location_manager_create().
int location_manager_get_last_location ( location_manager_h  manager,
double *  altitude,
double *  latitude,
double *  longitude,
double *  climb,
double *  direction,
double *  speed,
location_accuracy_level_e level,
double *  horizontal,
double *  vertical,
time_t *  timestamp 
)

Gets the last location information.

The altitude, latitude, longitude, climb, direction, speed, and timestamp values should be 0, if there is no record of any previous position information.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[out]altitudeThe current altitude (meters)
[out]latitudeThe current latitude [-90.0 ~ 90.0] (degrees)
[out]longitudeThe current longitude [-180.0 ~ 180.0] (degrees)
[out]climbThe climb (km/h)
[out]directionThe direction, degrees from the north
[out]speedThe speed (km/h)
[out]levelThe accuracy level
[out]horizontalThe horizontal accuracy (meters)
[out]verticalThe vertical accuracy (meters)
[out]timestampThe timestamp (time when measurement took place or 0 if valid)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
The location manager handle must be created by location_manager_create().
int location_manager_get_last_position ( location_manager_h  manager,
double *  altitude,
double *  latitude,
double *  longitude,
time_t *  timestamp 
)

Gets the last position information which is recorded.

The altitude, latitude, longitude, and timestamp values should be 0, if there is no record of any previous position information.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[out]altitudeThe last altitude (meters)
[out]latitudeThe last latitude [-90.0 ~ 90.0] (degrees)
[out]longitudeThe last longitude [-180.0 ~ 180.0] (degrees)
[out]timestampThe timestamp (time when measurement took place or 0 if valid)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
The location manager handle must be created by location_manager_create().
int location_manager_get_last_velocity ( location_manager_h  manager,
double *  climb,
double *  direction,
double *  speed,
time_t *  timestamp 
)

Gets the last velocity information which is recorded.

The climb, direction, and speed values should be 0, if there is no record of any previous velocity information.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[out]climbThe last climb (km/h)
[out]directionThe last direction, degrees from the north
[out]speedThe last speed (km/h)
[out]timestampThe timestamp (time when measurement took place or 0 if valid)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
The location manager handle must be created by location_manager_create().
int location_manager_get_location ( location_manager_h  manager,
double *  altitude,
double *  latitude,
double *  longitude,
double *  climb,
double *  direction,
double *  speed,
location_accuracy_level_e level,
double *  horizontal,
double *  vertical,
time_t *  timestamp 
)

Gets the current position information.

The result contains the current altitude, latitude, longitude, climb, direction, speed, level, horizontal, and vertical with a measurement timestamp.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[out]altitudeThe current altitude (meters)
[out]latitudeThe current latitude [-90.0 ~ 90.0] (degrees)
[out]longitudeThe current longitude [-180.0 ~ 180.0] (degrees)
[out]climbThe climb (km/h)
[out]directionThe direction, degrees from the north
[out]speedThe speed (km/h)
[out]levelThe accuracy level
[out]horizontalThe horizontal accuracy (meters)
[out]verticalThe vertical accuracy (meters)
[out]timestampThe timestamp (time when measurement took place or 0 if valid)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_GPS_SETTING_OFFGPS is not enabled
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
The location service state must be LOCATIONS_SERVICE_ENABLED with location_manager_start().

Gets the given location manager's method.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
[out]methodThe location method
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_create()
int location_manager_get_position ( location_manager_h  manager,
double *  altitude,
double *  latitude,
double *  longitude,
time_t *  timestamp 
)

Gets the current position information.

The result contains the current altitude, latitude, and longitude with a measurement timestamp.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[out]altitudeThe current altitude (meters)
[out]latitudeThe current latitude [-90.0 ~ 90.0] (degrees)
[out]longitudeThe current longitude [-180.0 ~ 180.0] (degrees)
[out]timestampThe timestamp (time when measurement took place or 0 if valid)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_GPS_SETTING_OFFGPS is not enabled
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
The location service state must be LOCATIONS_SERVICE_ENABLED with location_manager_start().
int location_manager_get_velocity ( location_manager_h  manager,
double *  climb,
double *  direction,
double *  speed,
time_t *  timestamp 
)

Gets the current velocity information.

The result contains the current climb, direction, and speed with a measurement timestamp.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[out]climbThe climb (km/h)
[out]directionThe direction, degrees from the north
[out]speedThe speed (km/h)
[out]timestampThe timestamp (time when measurement took place or 0 if valid)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_GPS_SETTING_OFFGPS is not enabled
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
The location service state must be LOCATIONS_SERVICE_ENABLED with location_manager_start().
int location_manager_is_enabled_method ( location_method_e  method,
bool *  enable 
)

Checks whether the given location method is enabled or not on setting.

Since :
2.3.1
Parameters:
[in]methodThe location method to be checked
[out]enableThe result value of checking the given location method
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INCORRECT_METHODIncorrect method
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_create()
location_manager_set_setting_changed_cb()
location_manager_unset_setting_changed_cb()

Checks whether the mock location is enabled.

Since :
3.0
Parameters:
[out]enabledIndicates whether the mock location is enabled
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_enable_mock_location()
location_manager_set_mock_location()
location_manager_clear_mock_location()

Checks whether the given location method is available.

Since :
2.3.1
Remarks:
The specific error code can be obtained using the get_last_result() method. Error codes are described in Exception section.
Parameters:
[in]methodThe location method to be checked
Returns:
true if the specified location method is supported, otherwise false if it is not available
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
LOCATIONS_ERROR_INCORRECT_METHODIncorrect method
See also:
location_manager_create()
location_manager_get_method()

Deletes bounds for a given location manager.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
[in]boundsThe location bounds handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_OUT_OF_MEMORYOut of memory
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_add_boundary()
int location_manager_request_single_location ( location_manager_h  manager,
int  timeout,
location_updated_cb  callback,
void *  user_data 
)

Requests to update current location once.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Remarks:
Do not request to start the location service using the same manager handler. Calling this function invokes a location service event. When the location service is updated, location_updated_cb.
Parameters:
[in]managerThe location manager handle
[in]timeoutTimeout to stop requesting single location after
[in]callbackThe location callback function to register
[in]user_dataThe user data to be passed to the callback function
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_INCORRECT_METHODIncorrect method
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_NETWORK_FAILEDNetwork failed
LOCATIONS_ERROR_GPS_SETTING_OFFGPS is not enabled
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
It invokes location_updated_cb().
int location_manager_set_distance_based_location_changed_cb ( location_manager_h  manager,
location_changed_cb  callback,
int  interval,
double  distance,
void *  user_data 
)

Registers a callback function to be invoked at minimum interval or minimum distance with updated position information.

Since :
3.0
Parameters:
[in]managerThe location manager handle
[in]callbackThe callback function to register
[in]intervalThe minimum interval between position updates [1 ~ 120] (seconds)
[in]distanceThe minimum distance between position updates [1 ~ 120] (meters)
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
location_changed_cb() will be invoked.
See also:
location_manager_unset_distance_based_location_changed_cb()
location_changed_cb()
int location_manager_set_location_batch_cb ( location_manager_h  manager,
location_batch_cb  callback,
int  batch_interval,
int  batch_period,
void *  user_data 
)

Registers a callback function to be invoked when batch_period is expired.

Since :
2.3.2
Remarks:
The batch_period should be greater than or equal to the batch_interval. In addition, sometimes the period may not work as you intended, the maximum permissible value for batch_period is device specific.
Parameters:
[in]managerThe location manager handle
[in]callbackThe callback function to register
[in]batch_intervalThe batch sampling interval [1 ~ 255] (seconds)
[in]batch_periodThe batch period [1 ~ 60000] (seconds)
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
location_batch_cb() will be invoked.
See also:
location_manager_start_batch()
location_batch_cb()
location_manager_unset_location_batch_cb()
int location_manager_set_location_changed_cb ( location_manager_h  manager,
location_changed_cb  callback,
int  interval,
void *  user_data 
)

Registers a callback function to be invoked at defined interval with updated location information.

Since :
3.0
Parameters:
[in]managerThe location manager handle
[in]callbackThe callback function to register
[in]intervalThe interval [1 ~ 120] (seconds)
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
location_changed_cb() will be invoked.
See also:
location_manager_unset_location_changed_cb()
location_changed_cb()
int location_manager_set_mock_location ( location_manager_h  manager,
const double  latitude,
const double  longitude,
const double  altitude,
const double  speed,
const double  direction,
const double  accuracy 
)

Sets a mock location for the given location method.

The location sets the given altitude, latitude, longitude, climb, direction, speed, level, horizontal, and vertical accuracy.

Since :
3.0
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Parameters:
[in]managerThe location manager handle
[in]latitudeThe current latitude [-90.0 ~ 90.0] (degrees)
[in]longitudeThe current longitude [-180.0 ~ 180.0] (degrees)
[in]altitudeThe current altitude (meters)
[in]speedThe speed (km/h)
[in]directionThe direction, degrees from the north [0.0 ~ 360.0]
[in]accuracyThe horizontal accuracy (meters)
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid argument
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_SETTING_OFFMOCK location is not enabled
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_create()
location_manager_is_enabled_mock_location()
location_manager_enable_mock_location()
location_manager_clear_mock_location()
int location_manager_set_position_updated_cb ( location_manager_h  manager,
location_position_updated_cb  callback,
int  interval,
void *  user_data 
)

Registers a callback function to be invoked at defined interval with updated position information.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
[in]callbackThe callback function to register
[in]intervalThe interval [1 ~ 120] (seconds)
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
location_position_updated_cb() will be invoked.
See also:
location_manager_unset_position_updated_cb()
location_position_updated_cb()

Registers a callback function to be invoked when the location service state is changed.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
location_service_state_changed_cb() will be invoked.
See also:
location_manager_unset_service_state_changed_cb()
location_service_state_changed_cb()
location_manager_start()
location_manager_stop()
location_service_state_e

Registers a callback function to be invoked when the location setting is changed.

Since :
2.3.1
Parameters:
[in]methodThe method to observe
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_INCORRECT_METHODIncorrect method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
location_setting_changed_cb() will be invoked.
See also:
location_manager_unset_setting_changed_cb()
location_setting_changed_cb()
int location_manager_set_velocity_updated_cb ( location_manager_h  manager,
location_velocity_updated_cb  callback,
int  interval,
void *  user_data 
)

Registers a callback function to be invoked at defined interval with updated velocity information.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
[in]callbackThe callback function to register
[in]intervalThe interval [1 ~ 120] (seconds)
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
location_velocity_updated_cb() will be invoked.
See also:
location_manager_unset_velocity_updated_cb()
location_velocity_updated_cb()
int location_manager_set_zone_changed_cb ( location_manager_h  manager,
location_zone_changed_cb  callback,
void *  user_data 
)

Registers a callback function to be invoked when the previously set boundary area is entered or left.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
[in]callbackThe callback function to register
[in]user_dataThe user data to be passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
location_manager_add_boundary() is called before.
Postcondition:
location_zone_changed_cb() will be invoked.
See also:
location_manager_unset_zone_changed_cb()
location_zone_changed_cb()

Starts the location service.

Since :
2.3.1
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Remarks:
There is no limit on number of location managers for which this function was called.
Calling this function invokes a location service event. When the location service is enabled, the service state change callback (set using location_manager_set_service_state_changed_cb()) notifies the user with LOCATIONS_SERVICE_ENABLED as the first argument, and the service starts.
The started service is a requirement for calling these functions: location_manager_get_position(), location_manager_get_velocity(), location_manager_get_accuracy(), gps_status_get_nmea(), gps_status_get_satellite(), gps_status_foreach_satellites_in_view().
Once you stop the service using location_manager_stop(), you can no longer call the functions listed above.
Starting and stopping the service is in the scope of the given location manager only (if there is more than one manager, starting and stopping should be executed for each of them separately).
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_NETWORK_FAILEDNetwork failed
LOCATIONS_ERROR_GPS_SETTING_OFFGPS is not enabled
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Postcondition:
It invokes location_position_updated_cb(), location_velocity_updated_cb(), location_zone_changed_cb(), and location_service_state_changed_cb().
See also:
location_manager_stop()
location_manager_get_position()
location_manager_get_velocity()
location_manager_get_accuracy()
location_manager_set_service_state_changed_cb()
location_manager_set_position_updated_cb()
location_position_updated_cb()
location_manager_set_velocity_updated_cb()
location_velocity_updated_cb()
location_manager_set_zone_changed_cb()
location_zone_changed_cb()

Starts the location batch service.

Calling this function starts location batch service, location_batch_cb() will be invoked every batch_period seconds. After that, you can obtain all locations with location_manager_foreach_location_batch().

Since :
2.3.2
Privilege Level:
public
Privilege:
http://tizen.org/privilege/location
Remarks:
Calling this function invokes a location service event. When the location service is enabled, the service state change callback (set using location_manager_set_service_state_changed_cb()) notifies the user with LOCATIONS_SERVICE_ENABLED as the first argument, and the service starts.
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_INCORRECT_METHODIncorrect method
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_NETWORK_FAILEDNetwork failed
LOCATIONS_ERROR_GPS_SETTING_OFFGPS is not enabled
LOCATIONS_ERROR_ACCESSIBILITY_NOT_ALLOWEDThe application does not have the privilege to call this method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
Precondition:
location_manager_set_location_batch_cb()
See also:
location_manager_set_service_state_changed_cb()
location_service_state_changed_cb()
location_manager_foreach_location_batch()
location_manager_stop_batch()

Stops the location service.

Since :
2.3.1
Remarks:
This function initiates the process of stopping the service. When the process is finished, callback set using location_manager_set_service_state_changed_cb() will be called, with LOCATIONS_SERVICE_DISABLED as first argument. When that happens, the service is stopped and the user is notified.
You can stop and start the location manager as needed.
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_NETWORK_FAILEDNetwork failed
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_start()
location_manager_set_service_state_changed_cb()
location_service_state_changed_cb()

Stops the location batch service.

Since :
2.3.2
Remarks:
This function initiates the process of stopping the service. When the process is finished, callback set using location_manager_set_service_state_changed_cb() will be called, with LOCATIONS_SERVICE_DISABLED as the first argument.
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_SERVICE_NOT_AVAILABLEService not available
LOCATIONS_ERROR_NETWORK_FAILEDNetwork failed
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_start_batch()
location_manager_set_service_state_changed_cb()
location_service_state_changed_cb()

Unregisters the callback function.

Since :
3.0
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_set_distance_based_location_changed_cb()

Unregisters the callback function.

Since :
2.3.2
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_set_location_batch_cb()

Unregisters the callback function.

Since :
3.0
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_set_location_changed_cb()

Unregisters the callback function.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_set_position_updated_cb()

Unregisters the callback function.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_set_service_state_changed_cb()

Unregisters the callback function.

Since :
2.3.1
Parameters:
[in]methodThe method to observe
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_INCORRECT_METHODIncorrect method
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_set_setting_changed_cb()

Unregisters the callback function.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_set_velocity_updated_cb()

Unregisters the callback function.

Since :
2.3.1
Parameters:
[in]managerThe location manager handle
Returns:
0 on success, otherwise a negative error value
Return values:
LOCATIONS_ERROR_NONESuccessful
LOCATIONS_ERROR_INVALID_PARAMETERInvalid parameter
LOCATIONS_ERROR_NOT_SUPPORTEDNot supported
See also:
location_manager_set_zone_changed_cb()